Impact of Degradation of Polyethylene Films Under Simulated Climatic Conditions on Their Mechanical Behaviour and Thermal Stability and Lifetime

2012 ◽  
Author(s):  
Abdelkader Dehbi ◽  
Khaled Djakhdane ◽  
Abdel-Hamid I. Mourad
Keyword(s):  
Thermal Stability ◽  
Mechanical Behaviour ◽  
Polymeric Materials ◽  
Industrial Applications ◽  
Mechanical Tests ◽  
Climatic Conditions ◽  
Material Structure ◽  
Structural Modifications ◽  
Polyethylene Films ◽  
The Impact

Studying the impact of degradation of polyethylene tri-layer films under simulated climatic conditions, of North Africa, on their mechanical behaviour and thermal stability and lifetime is the main objective of this work. The films are produced by the co-extrusion technique which is used in several industrial applications such as the nuclear related applications. The climatic conditions such as temperature, solar radiation, wind, sand and humidity are crucial factors in the ageing process, degradation and lifetime of polymeric materials. At the molecular level, these conditions have severe structural modifications and oxidation in polymers which are the main mechanism of ageing. Polyethylene films have numerous industrial applications in which they are susceptible to such harsh environmental conditions. Samples in the form of polyethylene films of 180μm thickness are artificially aged at different conditions of temperature and humidity. Monitoring the degradation in physicochemical properties of polymer matrices used and their stabilizing additives is carried out by thermal analysis (DSC) and mechanical tests. The results revealed that the investigated climatic conditions have essential deteriorative effects on the performance of the film. The correlation between the modification in the material structure and the degradation in the film properties is discussed.

scholarly journals Development of Construction and Repair Materials Used in Transport and Technological Machines Operating in the Arctic

2021 ◽  
Vol 346 ◽  
pp. 03019
Author(s):  
Ekaterina Kosenko ◽  
Natalia Baurova ◽  
Vladimir Zorin ◽  
Alexander Konoplin
Keyword(s):  
Road Construction ◽  
Polymeric Materials ◽  
Mechanical Tests ◽  
Climatic Conditions ◽  
The Arctic ◽  
Arctic Zone ◽  
Air Temperatures ◽  
Repair Materials ◽  
Strong Winds ◽  
C 30

Increasing the pace of development of the Arctic zone, among other tasks, requires the attraction of significant production resources to improve the transport network, in particular, road construction equipment and technological equipment. Extreme climatic conditions, including low air temperatures and strong winds, are features of the Arctic zone. In this regard, there is a need to form a methodological basis for the development of construction and repair materials for use in the Arctic. To solve this problem, based on the results of mechanical tests at temperatures of +20°C, -30°C and -50°C, the possibility of using carbon fiber plastics with various types of hybrid matrices for the manufacture of mechanical engineering products operating in extreme conditions of the Arctic and the creation of reinforcing linings during their repair. The indicators of manufacturability during repairs under the conditions of constant exposure to negative temperatures using polymeric materials are considered.

scholarly journals The Impact of Vitrimers on the Industry of the Future: Chemistry, Properties and Sustainable Forward-Looking Applications

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1660 ◽  
Author(s):  
Walter Alabiso ◽  
Sandra Schlögl
Keyword(s):  
High Performance ◽  
Mechanical Stability ◽  
Polymeric Materials ◽  
Industrial Applications ◽  
Self Healing ◽  
Comprehensive Overview ◽  
The Family ◽  
The Impact ◽  
Technological Flexibility ◽  
Huge Variety

Thermosets are known to be very reliable polymeric materials for high-performance and light-weight applications, due to their retained dimensional stability, chemical inertia and rigidity over a broad range of temperatures. However, once fully cured, they cannot be easily reshaped or reprocessed, thus leaving still unsolved the issues of recycling and the lack of technological flexibility. Vitrimers, introduced by Leibler et al. in 2011, are a valiant step in the direction of bridging the chasm between thermoplastics and thermosets. Owing to their dynamic covalent networks, they can retain mechanical stability and solvent resistance, but can also flow on demand upon heating. More generally, the family of Covalent Adaptable Networks (CANs) is gleaming with astounding potential, thanks to the huge variety of chemistries that may enable bond exchange. Arising from this signature feature, intriguing properties such as self-healing, recyclability and weldability may expand the horizons for thermosets in terms of improved life-span, sustainability and overall enhanced functionality and versatility. In this review, we present a comprehensive overview of the most promising studies featuring CANs and vitrimers specifically, with particular regard for their industrial applications. Investigations into composites and sustainable vitrimers from epoxy-based and elastomeric networks are covered in detail.

scholarly journals Fabrication of High-Performance Bamboo–Plastic Composites Reinforced by Natural Halloysite Nanotubes

Molecules ◽  
2020 ◽  
Vol 25 (9) ◽  
pp. 2259
Author(s):  
Xiaobei Jin ◽  
Jingpeng Li ◽  
Rong Zhang ◽  
Zehui Jiang ◽  
Daochun Qin
Keyword(s):  
Thermal Stability ◽  
High Performance ◽  
Moisture Absorption ◽  
Mechanical Performance ◽  
Halloysite Nanotubes ◽  
Industrial Applications ◽  
High Concentration ◽  
Morphological Studies ◽  
Plastic Composites ◽  
The Impact

Bamboo-plastic composites (BPCs) as new biomass-plastic composites have recently attracted much attention. However, weak mechanical performance and high moisture absorption as well as low thermal stability greatly limit their industrial applications. In this context, different amounts of halloysite nanotubes (HNTs) were used as a natural reinforcing filler for BPCs. It was found that the thermal stability of BPCs increased with increasing HNT contents. The mechanical strength of BPCs was improved with the increase in HNT loading up to 4 wt% and then worsened, while the impact strengths were slightly reduced. Low HNT content (below 4 wt%) also improved the dynamic thermomechanical properties and reduced the water absorption of the BPCs. Morphological studies confirmed the improved interfacial compatibility of the BPC matrix with 4 wt% HNT loading, and high-concentration HNT loading (above 6 wt%) resulted in easy agglomeration. The results highlight that HNTs could be a feasible candidate as nanoreinforcements for the development of high-performance BPCs.

scholarly journals Dry-Jet Wet Spinning of Thermally Stable Lignin-Textile Grade Polyacrylonitrile Fibers Regenerated from Chloride-Based Ionic Liquids Compounds

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3687
Author(s):  
Muhannad Al Aiti ◽  
Amit Das ◽  
Mikko Kanerva ◽  
Maija Järventausta ◽  
Petri Johansson ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Ionic Liquids ◽  
High Performance ◽  
Paper Industry ◽  
Mechanical Tests ◽  
Coagulation Bath ◽  
Scanning Calorimetry ◽  
The Impact ◽  
Kinetics Of

In this paper, we report on the use of amorphous lignin, a waste by-product of the paper industry, for the production of high performance carbon fibers (CF) as precursor with improved thermal stability and thermo-mechanical properties. The precursor was prepared by blending of lignin with polyacrylonitrile (PAN), which was previously dissolved in an ionic liquid. The fibers thus produced offered very high thermal stability as compared with the fiber consisting of pure PAN. The molecular compatibility, miscibility, and thermal stability of the system were studied by means of shear rheological measurements. The achieved mechanical properties were found to be related to the temperature-dependent relaxation time (consistence parameter) of the spinning dope and the diffusion kinetics of the ionic liquids from the fibers into the coagulation bath. Furthermore, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical tests (DMA) were utilized to understand in-depth the thermal and the stabilization kinetics of the developed fibers and the impact of lignin on the stabilization process of the fibers. Low molecular weight lignin increased the thermally induced physical shrinkage, suggesting disturbing effects on the semi-crystalline domains of the PAN matrix, and suppressed the chemically induced shrinkage of the fibers. The knowledge gained throughout the present paper allows summarizing a novel avenue to develop lignin-based CF designed with adjusted thermal stability.

Impact of roof shading on building energy performance in warm & humid climatic places of India

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Performance ◽  
General Assumption ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Passive Cooling ◽  
Base Case ◽  
U Value ◽  
The Impact

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.

A Predictive Model of the Impact of the Skidding System on Forest Soil in Severe Climatic Conditions

2020 ◽  
pp. 131-144
Author(s):  
S.E. Rudov ◽  
◽  
V.Ya. Shapiro ◽  
O.I. Grigoreva ◽  
I.V. Grigorev ◽  
...  
Keyword(s):  
Forest Soil ◽  
Warm Season ◽  
Climatic Conditions ◽  
Soil Freezing ◽  
Class Iii ◽  
Freezing And Thawing ◽  
Metal Structures ◽  
Rapid Adjustment ◽  
Soil Freezing And Thawing ◽  
The Impact

In the Russian Federation logging operations are traditionally carried out in winter. This is due to the predominance of areas with swamped and water-logged (class III and IV) soils in the forest fund, where work of forestry equipment is difficult, and sometimes impossible in the warm season. The work of logging companies in the forests of the cryolithozone, characterized by a sharply continental climate, with severe frosts in winter, is hampered by the fact that forest machines are not recommended to operate at temperatures below –40 °C due to the high probability of breaking of metal structures and hydraulic system. At the same time, in the warm season, most of the cutting areas on cryosolic soils become difficult to pass for heavy forest machines. It turns out that the convenient period for logging in the forests of the cryolithozone is quite small. This results in the need of work in the so-called off-season period, when the air temperature becomes positive, and the thawing processes of the soil top layer begin. The same applies to the logging companies not operating in the conditions of cryosolic soils, for instance, in the Leningrad, Novgorod, Pskov, Vologda regions, etc. The observed climate warming has led to a significant reduction in the sustained period of winter logging. Frequent temperature transitions around 0 °C in winter, autumn and spring necessitate to work during the off-season too, while cutting areas thaw. In bad seasonal and climatic conditions, which primarily include off-season periods in general and permafrost in particular, it is very difficult to take into account in mathematical models features of soil freezing and thawing and their effect on the destruction nature. The article shows that the development of long-term predictive models of indicators of cyclic interaction between the skidding system and forest soil in adverse climatic conditions of off-season logging operations in order to improve their reliability requires rapid adjustment of the calculated parameters based on the actual experimental data at a given step of the cycles.

Evaluation of the Impact of Fatty Acid Methyl Ester (FAME) Contamination on the Thermal Stability of Jet A

2013 ◽  
Author(s):  
Jr Morris ◽  
Shardo Robert W. ◽  
Higgins James ◽  
Cook Kim ◽  
Tanner Rhonda ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
The Impact ◽  
Thermal Stability Of

scholarly journals Smoothing additive manufactured parts using ns-pulsed laser radiation

2021 ◽  
Author(s):  
Florian Kuisat ◽  
Fernando Lasagni ◽  
Andrés Fabián Lasagni
Keyword(s):  
Surface Roughness ◽  
Mechanical Performance ◽  
State Of The Art ◽  
Pulsed Laser ◽  
Industrial Applications ◽  
Laser Source ◽  
Pulsed Laser Radiation ◽  
Current State ◽  
The Impact

AbstractIt is well known that the surface topography of a part can affect its mechanical performance, which is typical in additive manufacturing. In this context, we report about the surface modification of additive manufactured components made of Titanium 64 (Ti64) and Scalmalloy®, using a pulsed laser, with the aim of reducing their surface roughness. In our experiments, a nanosecond-pulsed infrared laser source with variable pulse durations between 8 and 200 ns was applied. The impact of varying a large number of parameters on the surface quality of the smoothed areas was investigated. The results demonstrated a reduction of surface roughness Sa by more than 80% for Titanium 64 and by 65% for Scalmalloy® samples. This allows to extend the applicability of additive manufactured components beyond the current state of the art and break new ground for the application in various industrial applications such as in aerospace.

Sign in / Sign up

Export Citation Format

Share Document