scholarly journals Development and Testing of a Friction-Based Post-Installable Fiber-Optic Monitoring System for Subsea Applications

2018 ◽  
Author(s):  
Calvin H. Seaman ◽  
J. Conrad Wilson ◽  
Robert M. Kipp ◽  
John D. Hedengren ◽  
Henry H. Tang ◽  
...  
Keyword(s):  
Monitoring System ◽  
Oil And Gas ◽  
Fiber Optic ◽  
Primary Objective ◽  
Design Solution ◽  
Design Development ◽  
Strain Sensing ◽  
Time Data ◽  
Design Changes ◽  
Wide Range

This paper continues to document the design, development, and test of a friction-based (non-adhesive) post-installable fiber-optic strain sensing system for oil and gas applications — especially those that require deployment on existing subsea structures. (Ref: OMAE2017-61494 Development and Testing of a Friction-Based Post-Installable Sensor for Subsea Fiber-Optic Monitoring Systems [1]). The prototype fiber-optic monitoring system collects a wide range of real-time data, which can be used to determine structural loading, fatigue, temperature, pressure, and flow assurance on operational platforms. The primary challenge of a post-installed instrumentation monitoring system is to ensure secure coupling between the sensors and the structure of interest for reliable measurements. Friction-based coupling devices have the potential to overcome installation challenges caused by marine growth and soil contamination on subsea structures, flowlines, or risers. This particular design solution is compatible with structures that are suspended in the water column and those that are resting on the seabed. In addition, the system can be installed by commercial divers in shallow depths or by remotely operated vehicles in deep-water applications. Operational limitations of the initial design concept were identified in the previous series of tests (2016–2017), and several innovative enhancements have been implemented which resulted in significant improvements in sensor system coupling and strain measurement correlation with traditional strain measuring devices. This paper provides a summary of the notable prototype design changes, full-scale test article buildup, and detailed performance data recorded during tension and compression loading that simulated representative offshore conditions. The test results were positive and demonstrated the effectiveness of the design enhancements. Compromises made during mounting of the sensing elements resulted in better performance in tension than compression. These effects are well understood and are fully discussed, and do not influence the viability of the design changes. This study is part of a continuing collaboration between the Houston-based NASA-Johnson Space Center and Astro Technology, Inc. within a study called Clear Gulf. The primary objective of the Clear Gulf study is to develop advanced instrumentation technologies that will improve operational safety and reduce the risk of hydrocarbon spillage. NASA provided unique insights, expansive test facilities, and technical expertise to advance these technologies that would benefit the environment, the public, and commercial industries.

Novel Near-Wellbore Fracture Diagnosis for Unconventional Wells Using High-Resolution Distributed Strain Sensing during Production

SPE Journal ◽  
2021 ◽  
pp. 1-10
Author(s):  
Ge Jin ◽  
Gustavo Ugueto ◽  
Magdalena Wojtaszek ◽  
Artur Guzik ◽  
Dana Jurick ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Fiber Optic ◽  
Fracture Network ◽  
Production Performance ◽  
Hydraulic Fractures ◽  
Fracture Aperture ◽  
Strain Sensing ◽  
Extensional Strain ◽  
Cluster Efficiency ◽  
Distributed Strain

Summary The characteristics of hydraulic fractures in the near-wellbore region contain critical information related to the production performance of unconventional wells. We demonstrate a novel application of a fiber-optic-based distributed strain sensing (DSS) technology to measure and characterize near-wellbore fractures and perforation cluster efficiency during production. Distributed fiber-optic-based strain measurements are made based on the frequency shift of the Rayleigh scatter spectrum, which is linearly dependent on strain and temperature changes of the sensing fiber. Strain changes along the wellbore are continuously measured during the shut-in and reopening operations of a well. After removing temperature effects, extensional strain changes can be observed at locations around the perforation cluster during a shut-in period. We interpret that the observed strain changes are caused by near-wellbore fracture aperture changes caused by pressure increases within the near-wellbore fracture network. The depth locations of the measured strain changes correlate well with distributed acoustic sensing (DAS) acoustic intensity measurements that were measured during the stimulation of the well. The shape and magnitude of the strain changes differ significantly between two completion designs in the same well. Different dependencies between strain and borehole pressure can be observed at most of the perforation clusters between the shut-in and reopening periods. We assess that this new type of distributed fiber-optic measurement method can significantly improve understanding of near-wellbore hydraulic fracture characteristics and the relationships between stimulation and production from unconventional oil and gas wells.

Collaboration and Optimization Processes Contribute to Ultra-ERD Offshore Well Success

2021 ◽  
Vol 73 (05) ◽  
pp. 61-62
Author(s):  
Judy Feder
Keyword(s):  
Western Australia ◽  
Oil And Gas ◽  
New Technology ◽  
Data Interpretation ◽  
Primary Objective ◽  
Asia Pacific ◽  
Time Data ◽  
The North ◽  
Engineering Collaboration ◽  
Engineering Designs

This article, written by JPT Technology Editor Judy Feder, contains highlights of paper SPE 202251, “Transforming the Mindset To Drill Ultra-ERD Wells With High Tortuosity,” by Barry Goodin, SPE, Duane Selman, and Andy Wroth, Vermilion Oil and Gas, et al., prepared for the 2020 SPE Asia Pacific Oil and Gas Conference and Exhibition, originally scheduled to be held in Perth, Australia, 20–22 October. The paper has not been peer reviewed. The complete paper describes the extensive integrated engineering collaboration and optimization process that allowed an operator to push the drilling and completion envelope to drill a pair of complex, ultra-extended-reach-drilling (ERD) wells in the mature Wandoo field in the Carnarvon Basin offshore Western Australia. The shallow reservoir depth, extreme ERD profile, and high tortuosity requirement for the wells posed significant challenges. These were overcome with extensive planning; integrated engineering designs; application of new technology; good-quality, real-time data interpretation; and strong execution support from both rig site and town. Introduction The Wandoo field, in 56 m of water off-shore Western Australia, was discovered in 1991 and subsequently developed and placed on production in 1993. The shallow unconsolidated sandstone reservoir consists of a heavily biodegraded oil column overlain by a gas cap and supported by a strong aquifer drive. Field infrastructure consists of a 15-well-slot manned production facility, Wandoo B, and a five-slot monopod, Wandoo A, which is tied back to Wandoo B by subsea in-field pipelines. In late 2018, the operator planned and executed a two-well drilling campaign consisting of two complex, ultra-ERD wells, Wandoo B15 and B16. Both wells were planned to be batch drilled for the top hole and intermediate hole sections, with the production hole sections to be drilled and completed sequentially. The primary objective for the B15 well was to recover unswept oil along the western flank of the field and track the well along the main Wandoo fault to the north to assess the structure and reserves from the northern tip of the field. The B16 well objective was to access unswept reserves through the center and down to the south of the field, essentially twinning the B11ST1 well, another ERD well drilled on an earlier campaign, to its eastern flank. To maximize recovery, both wells needed to be placed approximately 1 m below the top of the reservoir, except where overlain by the gas cap, in which case the wells were to be placed approximately 2 m below the gas/oil contact to avoid gas coning. Drilling Challenges and Solutions The first half of the complete paper presents a detailed discussion of the drilling challenges and solutions, illustrated with schematics, maps, charts, and graphs. Both Wells B15 and B16 were classified as ultra-ERD wells because the shallow true vertical depth (TVD) of the reservoir resulted in extreme stepout ratios and required highly complex well paths to access the remaining reserves. The complete paper lists various specific drilling- and systems-related challenges.

scholarly journals The anatomy of electronic patient record ethics: a framework to guide design, development, implementation, and use

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Tim Jacquemard ◽  
Colin P. Doherty ◽  
Mary B. Fitzsimons
Keyword(s):  
Applied Ethics ◽  
Data Access ◽  
Primary Objective ◽  
Electronic Patient Records ◽  
Design Development ◽  
Underlying Assumption ◽  
Ethics Framework ◽  
Wide Range ◽  
Collection Data ◽  
State Of Affairs

Abstract Background This manuscript presents a framework to guide the identification and assessment of ethical opportunities and challenges associated with electronic patient records (EPR). The framework is intended to support designers, software engineers, health service managers, and end-users to realise a responsible, robust and reliable EPR-enabled healthcare system that delivers safe, quality assured, value conscious care. Methods Development of the EPR applied ethics framework was preceded by a scoping review which mapped the literature related to the ethics of EPR technology. The underlying assumption behind the framework presented in this manuscript is that ethical values can inform all stages of the EPR-lifecycle from design, through development, implementation, and practical application. Results The framework is divided into two parts: context and core functions. The first part ‘context’ entails clarifying: the purpose(s) within which the EPR exists or will exist; the interested parties and their relationships; and the regulatory, codes of professional conduct and organisational policy frame of reference. Understanding the context is required before addressing the second part of the framework which focuses on EPR ‘core functions’ of data collection, data access, and digitally-enabled healthcare. Conclusions The primary objective of the EPR Applied Ethics Framework is to help identify and create value and benefits rather than to merely prevent risks. It should therefore be used to steer an EPR project to success rather than be seen as a set of inhibitory rules. The framework is adaptable to a wide range of EPR categories and can cater for new and evolving EPR-enabled healthcare priorities. It is therefore an iterative tool that should be revisited as new EPR-related state-of-affairs, capabilities or activities emerge.

Dry Low NOx Emissions Operability Enhancement of a Heavy-Duty Gas Turbine by Means of Fuel Burner Design Development and Testing

2018 ◽  
Author(s):  
Matteo Cerutti ◽  
Nicola Giannini ◽  
Gianni Ceccherini ◽  
Roberto Meloni ◽  
Emanuele Matoni ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Operating Conditions ◽  
Design Development ◽  
Heavy Duty ◽  
Design Changes ◽  
Wide Range ◽  
Development Phases ◽  
Burner Design ◽  
Heavy Duty Gas Turbine ◽  
Fuel Burner

This paper describes the development phases of an annular type combustor for heavy-duty gas turbine applications. High cycle efficiency and low emissions are required over a wide range of load conditions, with the consequence of reducing margin to thermo-acoustic instability onset and lean blow-out. In addition, in lean premixed combustors, the increased fuel air mixing times required to keep emissions low, may lead to undesired ignition or flashback into the fuel burner ducts. All these aspects are matter of this work and focus is on fuel burner design modifications which allowed dry emissions reduction while maintaining a sufficiently wide safe operation window. A synergic effort has been put in place, involving experimental campaigns and CFD simulations, with the purpose of assessing design changes initially and doing screening. In the meanwhile, numerical practices have taken benefits form the experience growth. Results of past work on similar components has been leveraged too. Test campaign involved different scale facilities, from single burner through full annular combustor up to full scale prototype engine. The progressive reduction of viable option for combustor components design changes, due to high impact of such modifications during the gas turbine late development phases, forced designers to concentrate efforts onto fuel burner optimization, looking for efficient ways to implement modifications and assess their effectiveness of combustion system performances. Emissions trends, blow-out and flashback margin for several burner designs are reported. Numerical analysis results are also shown, which revealed to be well aligned with the experimental outcomes, allowing burner optimized solution to be identified. Finally, characterization with respect to fuel gas composition is shown as well as sensitivity to different operating conditions.

Pipeline Leak Monitoring System Research Based on Characteristic Curve

2012 ◽  
Vol 461 ◽  
pp. 407-410 ◽  
Author(s):  
Lin Xu ◽  
Qin Zhang ◽  
Yi Fan Yu
Keyword(s):  
Monitoring System ◽  
Oil And Gas ◽  
Rbf Neural Network ◽  
Characteristic Curve ◽  
Field Tests ◽  
Data Access ◽  
Original Data ◽  
Time Data ◽  
Access Methods ◽  
Oil Pipeline

To ensure the safe operation of oil and gas pipeline, designed based on the characteristic curve of pipeline leak monitoring system. Detailed real-time data access methods and processes, described RBF neural network algorithms and theory for identifying conditions signal , discussed the pipeline characteristic and device characteristic curve , described the principle to determine the pipeline leak, while the formula for calculating the relevant instructions to do the expansion, through the digital platform interface to obtain a snapshot data improves the reliability and accuracy of the original data. Field tests proved the system's good performance for other crude oil pipeline leak detection to provide guidance.

scholarly journals Development and Testing of a Friction-Based Post-Installable Fiber-Optic Monitoring System for Subsea Applications

2017 ◽  
Author(s):  
Nicole L. Bentley ◽  
Calvin H. Seaman ◽  
David V. Brower ◽  
Henry H. Tang ◽  
Suy Q. Le
Keyword(s):  
Monitoring System ◽  
Fiber Optic ◽  
Performance Testing ◽  
Primary Objective ◽  
Design Concept ◽  
The Public ◽  
Future Design ◽  
Prototype Development ◽  
Coupling Device ◽  
Design And Testing

This paper presents the design and development of a friction-based coupling device for a fiber-optic monitoring system capable of measuring pressure, strain, and temperature that can be deployed on existing subsea structures. A summary is provided of the design concept, prototype development, prototype performance testing, and subsequent design refinements of the device. The results of laboratory testing of the first prototype performed at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are also included. Limitations of the initial concept were identified during testing and future design improvements were proposed and later implemented. These new features enhance the coupling of the sensor device and improve the monitoring system measurement capabilities. A major challenge of a post-installed instrumentation monitoring system is to ensure adequate coupling between the instruments and the structure of interest for reliable measurements. Friction-based devices have the potential to overcome coupling limitations caused by marine growth and soil contamination on flowlines, risers, and other subsea structures. The work described in this paper investigates the design and test of a friction-based coupling device (herein referred to as a friction clamp) which is suitable for pipelines and structures that are suspended in the water column as well as for those that are resting on the seabed. The monitoring elements consist of fiber-optic sensors that are bonded to a stainless steel clamshell assembly with a high-friction surface coating. The friction clamp incorporates a single hinge design to facilitate installation of the clamp and dual rows of opposing fasteners to distribute the clamping force along the structure. The friction clamp can be modified to be installed by commercial divers in shallow depths or by remotely operated vehicles in deep-water applications. NASA-JSC was involved in the selection and testing of the friction coating, and in the design and testing of the prototype clamp device. Four-inch diameter and eight-inch diameter sub-scale friction clamp prototypes were built and tested to evaluate the strain measuring capabilities of the design under different loading scenarios. The testing revealed some limitations of the initial design concept, and subsequent refinements were explored to improve the measurement performance of the system. This study was part of a collaboration between NASA-JSC and Astro Technology Inc. within a study called Clear Gulf. The primary objective of the Clear Gulf study is to develop advanced instrumentation technologies that will improve operational safety and reduce the risk of hydrocarbon spillage. NASA provided unique insights, expansive test facilities, and technical expertise to advance technologies that will benefit the environment, the public, and commercial industries.

scholarly journals Distributed Fiber Optic Strain Sensing for Geomechanical Monitoring: Insights from Field Measurements of Ground Surface Deformation

Geosciences ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 285
Author(s):  
Rasha Amer ◽  
Ziqiu Xue ◽  
Tsutomu Hashimoto ◽  
Takeya Nagata
Keyword(s):  
Oil And Gas ◽  
Fiber Optic ◽  
Surface Deformation ◽  
Co2 Storage ◽  
Ground Surface ◽  
Field Tests ◽  
Deformation Monitoring ◽  
Water Tank ◽  
Strain Sensing ◽  
Geomechanical Monitoring

In recent years, distributed fiber optic strain sensing (DFOSS) technology has demonstrated a solution for continuous deformation monitoring from subsurface to surface along the wellbore. In this study, we installed a single-mode optical fiber cable in a shallow trench to establish an effective technique for ground surface deformation mapping. We conducted three experimental field tests (iron plate load, water tank filling up load, and airbag inflation) in order to confirm the strain sensitivity of DFOSS for static loads, dynamic overload, excavation, subsidence, and uplift. This paper also presents two installation methods to couple the fiber cable with the ground under various environmental conditions; here, the fiber cable was installed in a shallow trench with one part buried in the soil and another part covered with cement. Our results suggest that covering the cable with cement is a practical approach for installing a fiber cable for ground surface deformation monitoring. By combining this approach with wellbore DFOSS, accurate surface–subsurface deformation measurements can be obtained for three-dimensional geomechanical monitoring of CO2 storage and oil and gas fields in the future.

Nursing Movement Monitoring System Utilizing Hetero-core Fiber Optic Sensors Embedded in Medical Thin Films

2018 ◽  
Vol 138 (12) ◽  
pp. 525-532
Author(s):  
Masahiko Ito ◽  
Yuya Koyama ◽  
Michiko Nishiyama ◽  
Emi Yanagisawa ◽  
Mariko Hayashi ◽  
...  
Keyword(s):  
Thin Films ◽  
Monitoring System ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Core Fiber ◽  
Movement Monitoring

Pharmaceutical Co-Crystals - Design, Development and Applications

2020 ◽  
Vol 10 (3) ◽  
pp. 169-184
Author(s):  
Rachna Anand ◽  
Arun Kumar ◽  
Arun Nanda
Keyword(s):  
Physicochemical Properties ◽  
Crystal Engineering ◽  
Pharmacological Action ◽  
Physicochemical Characteristics ◽  
Research Area ◽  
Dissolution Profile ◽  
Design Development ◽  
Drug Molecule ◽  
Wide Range ◽  
Major Factors

Background: Solubility and dissolution profile are the major factors which directly affect the biological activity of a drug and these factors are governed by the physicochemical properties of the drug. Crystal engineering is a newer and promising approach to improve physicochemical characteristics of a drug without any change in its pharmacological action through a selection of a wide range of easily available crystal formers. Objective: The goal of this review is to summarize the importance of crystal engineering in improving the physicochemical properties of a drug, methods of design, development, and applications of cocrystals along with future trends in research of pharmaceutical co-crystals. Co-crystallization can also be carried out for the molecules which lack ionizable functional groups, unlike salts which require ionizable groups. Conclusion: Co-crystals is an interesting and promising research area amongst pharmaceutical scientists to fine-tune the physicochemical properties of drug materials. Co-crystallization can be a tool to increase the lifecycle of an older drug molecule. Crystal engineering carries the potential of being an advantageous technique than any other approach used in the pharmaceutical industry. Crystal engineering offers a plethora of biopharmaceutical and physicochemical enhancements to a drug molecule without the need of any pharmacological change in the drug.

scholarly journals Strain Sensor via Wood Anomalies in 2D Dielectric Array

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1022
Author(s):  
Rashid G. Bikbaev ◽  
Ivan V. Timofeev ◽  
Vasiliy F. Shabanov
Keyword(s):  
Higher Plants ◽  
Numerical Study ◽  
Reciprocal Lattice ◽  
Strain Sensing ◽  
Photonic Materials ◽  
Sensing Applications ◽  
Wide Range ◽  
Sensor Structure ◽  
Optical Behavior ◽  
Chlorophyll Absorption

Optical sensing is one of many promising applications for all-dielectric photonic materials. Herein, we present an analytical and numerical study on the strain-responsive spectral properties of a bioinspired sensor. The sensor structure contains a two-dimensional periodic array of dielectric nanodisks to mimic the optical behavior of grana lamellae inside chloroplasts. To accumulate a noticeable response, we exploit the collective optical mode in grana ensemble. In higher plants, such a mode appears as Wood’s anomaly near the chlorophyll absorption line to control the photosynthesis rate. The resonance is shown persistent against moderate biological disorder and deformation. Under the stretching or compression of a symmetric structure, the mode splits into a couple of polarized modes. The frequency difference is accurately detected. It depends on the stretch coefficient almost linearly providing easy calibration of the strain-sensing device. The sensitivity of the considered structure remains at 5 nm/% in a wide range of strain. The influence of the stretching coefficient on the length of the reciprocal lattice vectors, as well as on the angle between them, is taken into account. This adaptive phenomenon is suggested for sensing applications in biomimetic optical nanomaterials.

Sign in / Sign up

Export Citation Format

Share Document