Comparing Wave Force and Wave-Induced Overturning Moment of Three Offshore Support Structures

2017 ◽  
Author(s):  
Youn-Ju Jeong ◽  
Min-Su Park ◽  
Jeongsoo Kim
Keyword(s):  
Shallow Water ◽  
Wave Height ◽  
Wave Force ◽  
Diffraction Effect ◽  
Support Structures ◽  
Support Structure ◽  
Sea Levels ◽  
Overturning Moment ◽  
Wave Nonlinearity ◽  
Wave Induced

In this study, in order to investigate wave force and wave-induced overturning moment according to the support structure types and sea levels, wave force tests were carried out for the three offshore support structures of Monopile, GBS, and Hybrid under three sea levels of HSWL, MSL, and LSWL. As the results of this study, it was found that, as the wave height increased at the shallow water (LSWL), wave force increased significantly because of the wave nonlinearity, named wave shoaling. Also, as the structural member size became larger, wave nonlinearity effects on wave force at the shallow water (LSWL) were reduced because of the wave diffraction effect of the large-sized member. Accordingly, variations of wave force and wave-induced overturning moment according to the wave heights and sea levels were larger in the slender member and smaller in the large-sized member. Therefore, it was concluded that wave force and wave-induced overturning moment of the large-sized support structure were little sensitive to the wave height and sea level than the slender support structure. Maximum overturning moments occurred at the HSWL in the Monopile, at the MSL in the GBS, and at the LSWL in the Hybrid, respectively.

scholarly journals Wave Force Characteristics of Large-Sized Offshore Wind Support Structures to Sea Levels and Wave Conditions

2019 ◽  
Vol 9 (9) ◽  
pp. 1855
Author(s):  
Youn-Ju Jeong ◽  
Min-Su Park ◽  
Jeongsoo Kim ◽  
Sung-Hoon Song
Keyword(s):  
Shallow Water ◽  
Wave Height ◽  
Wave Force ◽  
Diffraction Effect ◽  
Support Structures ◽  
Sea Levels ◽  
Irregular Wave ◽  
Long Period ◽  
Short Period ◽  
Period Wave

This paper presents the results of wave force tests conducted on three types of offshore support structures considering eight waves and three sea levels to investigate the corresponding wave forces. As a result of this study, it is found that the occurrence of shoaling in shallow water induces a significant increase of the wave force. Most of the test models at the shallow water undergo a nonlinear increase of the wave force with higher wave height increasing. In addition, the larger the diameter of the support structure within the range of this study, the larger the diffraction effect is, and the increase in wave force due to shoaling is suppressed. Under an irregular wave at the shallow water, the wave force to the long-period wave tends to be slightly higher than that of the short period wave since the higher wave height component included in the irregular wave has an influence on the shoaling. In addition, it is found that the influence of shoaling under irregular wave becomes more apparent in the long period.

Effects of Cnoidal Wave-Induced Seepage on Vertical Breakwater Resting on Permeable Elastic Seabed

2014 ◽  
Vol 716-717 ◽  
pp. 284-288
Author(s):  
Jian Kang Yang ◽  
Hua Huang ◽  
Lin Guo ◽  
Jing Rong Lin ◽  
Qing Yong Zhu ◽  
...  
Keyword(s):  
Shallow Water ◽  
Wave Theory ◽  
Cnoidal Wave ◽  
Load Prediction ◽  
Wave Load ◽  
Seepage Pressure ◽  
Theoretical Investigations ◽  
Nonlinearity Effect ◽  
Wave Nonlinearity ◽  
Wave Induced

Theoretical investigations on cnoidal waves interacting with breakwater resting on permeable elastic seabed are presented in this paper. Based on the shallow water reflected wave theory and Biot consolidation theory on wave-induced seepage pressure, the analytical solutions to first order cnoidal wave reflection and wave-induced seepage pressure are obtained by the eigenfunction expansion approach. Numerical results are presented to show the effects of depth of water, breakwater geometry on cnoidal wave-induced seepage uplift force and overturning moment. Compared with Airy wave theory, in certain shallow water conditions, the shallow water wave theory can more effectively illustrate wave nonlinearity effect in wave load prediction.

Low Frequency Wave Forces and Wave Induced Motions of a FPSO in Shallow Water

2007 ◽  
Author(s):  
Longfei Xiao ◽  
Jianmin Yang ◽  
Zhiqiang Hu
Keyword(s):  
Shallow Water ◽  
Wave Spectrum ◽  
Low Frequency ◽  
Wave Force ◽  
Wave Forces ◽  
Frequency Wave ◽  
Wave Basin ◽  
The Difference ◽  
The One ◽  
Wave Induced

The low frequency (LF) response of a soft yoke moored 160kDWT FPSO in shallow water is investigated by conducting frequency domain computations and wave basin model tests. An incident wave with Hs = 4.1m and Tp = 8.9s is applied. An obvious LF part appears in the measured wave spectrum at water depth of 16.7m. As a result, the 1st order LF wave force exists and is much larger than the 2nd one. The difference of the spectrums is about one hundred times. The LF wave drift force increases enormously. Consequently, much larger resonant surge response is induced. The LF surge amplitude at h = 16.7m is about 7 times the one at h = 29.0m and 9 times the one in deep water, although the 2nd order response changes a little. Therefore, in very shallow water, LF part of incident waves should be taken into account carefully and LF wave forces and wave induced motions will be very serious.

A Model for Long-Term Distribution of Wave Induced Loads in Steep and Breaking Shallow Water Waves

2012 ◽  
Author(s):  
Hans Fabricius Hansen ◽  
Iris Pernille Lohmann ◽  
Jacob Tornfeldt Sørensen ◽  
Flemming Schlütter
Keyword(s):  
Transfer Function ◽  
Shallow Water ◽  
Wave Height ◽  
Wave Breaking ◽  
Extreme Value Analysis ◽  
Offshore Wind Turbine ◽  
Height Distribution ◽  
Wave Load ◽  
Wave Induced

A new approach to determine the design wave load on bottom-fixed structures in shallow water breaking waves is presented here. The method takes into account the effects that wave breaking has on both the wave height distribution and the wave induced loads on the structure. The loads on offshore wind turbine foundations in irregular seas with a significant amount of wave breaking are modeled in a physical wave tank. The loads are related to wave characteristics as steepness and Ursell number, and a non-linear transfer function between wave height/period and wave load is established. Characteristic historical load events are now established by combining the transfer function with a record of the wave climate at the site. The latter is taken from a hindcast database, but could also come from site measurements. The long-term distribution of the load is estimated by adopting traditional extreme value analysis techniques to the historical characteristic loads.

The Concept of the Optimum Alignment of Discharge Pipelines Due to the Minimization of the Wave Forces

1992 ◽  
Vol 25 (9) ◽  
pp. 211-216
Author(s):  
A. Akyarli ◽  
Y. Arisoy
Keyword(s):  
Wave Height ◽  
Wave Force ◽  
Wave Forces ◽  
Wave Direction ◽  
Incoming Wave ◽  
Pipeline Route ◽  
Optimum Alignment ◽  
The Cost ◽  
Resultant Wave

As the wave forces are the function of the wave height, period and the angle between the incoming wave direction and the axis of the discharge pipeline, the resultant wave force is directly related to the alignment of the pipeline. In this paper, a method is explained to determine an optimum pipeline route for which the resultant wave force becomes minimum and hence, the cost of the constructive measures may decrease. Also, the application of this method is submitted through a case study.

Cnoidal Wave-Induced Residual Liquefaction in Loosely Deposited Seabed under Coastal Shallow Water

2021 ◽  
Vol 11 (24) ◽  
pp. 11631
Author(s):  
Xiuwei Chai ◽  
Jingyuan Liu ◽  
Yu Zhou
Keyword(s):  
Shallow Water ◽  
Pore Pressure ◽  
Water Environment ◽  
Lateral Spreading ◽  
Stokes Wave ◽  
Cnoidal Wave ◽  
Liquefaction Resistance ◽  
Liquefaction Process ◽  
Wave Induced ◽  
Seabed Soil

This study is aimed at numerically investigating the cnoidal wave-induced dynamics characteristics and the liquefaction process in a loosely deposited seabed floor in a shallow water environment. To achieve this goal, the integrated model FSSI-CAS 2D is taken as the computational platform, and the advanced soil model Pastor–Zienkiewicz Mark III is utilized to describe the complicated mechanical behavior of loose seabed soil. The computational results show that a significant lateral spreading and vertical subsidence could be observed in the loosely deposited seabed floor due to the gradual loss of soil skeleton stiffness caused by the accumulation of pore pressure. The accumulation of pore pressure in the loose seabed is not infinite but limited by the liquefaction resistance line. The seabed soil at some locations could be reached to the full liquefaction state, becoming a type of heavy fluid with great viscosity. Residual liquefaction is a progressive process that is initiated at the upper part of the seabed floor and then enlarges downward. For waves with great height in shallow water, the depth of the liquefaction zone will be greatly overestimated if the Stokes wave theory is used. This study can enhance the understanding of the characteristics of the liquefaction process in a loosely deposited seabed under coastal shallow water and provide a reference for engineering activities.

Stability of offshore structures in shallow water depth

2011 ◽  
Vol 2 (2) ◽  
pp. 320-333
Author(s):  
F. Van den Abeele ◽  
J. Vande Voorde
Keyword(s):  
Shallow Water ◽  
Water Depth ◽  
Fossil Fuels ◽  
Oil And Gas ◽  
Structural Response ◽  
Offshore Structures ◽  
Exploration And Production ◽  
Subsea Pipelines ◽  
Wave Induced ◽  
Shallow Water Depth

The worldwide demand for energy, and in particular fossil fuels, keeps pushing the boundaries of offshoreengineering. Oil and gas majors are conducting their exploration and production activities in remotelocations and water depths exceeding 3000 meters. Such challenging conditions call for enhancedengineering techniques to cope with the risks of collapse, fatigue and pressure containment.On the other hand, offshore structures in shallow water depth (up to 100 meter) require a different anddedicated approach. Such structures are less prone to unstable collapse, but are often subjected to higherflow velocities, induced by both tides and waves. In this paper, numerical tools and utilities to study thestability of offshore structures in shallow water depth are reviewed, and three case studies are provided.First, the Coupled Eulerian Lagrangian (CEL) approach is demonstrated to combine the effects of fluid flowon the structural response of offshore structures. This approach is used to predict fluid flow aroundsubmersible platforms and jack-up rigs.Then, a Computational Fluid Dynamics (CFD) analysis is performed to calculate the turbulent Von Karmanstreet in the wake of subsea structures. At higher Reynolds numbers, this turbulent flow can give rise tovortex shedding and hence cyclic loading. Fluid structure interaction is applied to investigate the dynamicsof submarine risers, and evaluate the susceptibility of vortex induced vibrations.As a third case study, a hydrodynamic analysis is conducted to assess the combined effects of steadycurrent and oscillatory wave-induced flow on submerged structures. At the end of this paper, such ananalysis is performed to calculate drag, lift and inertia forces on partially buried subsea pipelines.

THE INFLUENCE OF CENTRE BOW LENGTH ON SLAMMING LOADS AND MOTIONS OF LARGE WAVE-PIERCING CATAMARANS

2021 ◽  
Vol 160 (A1) ◽  
Author(s):  
J R Shahraki ◽  
G A Thomas ◽  
M R Davis
Keyword(s):  
Wave Height ◽  
Full Scale ◽  
Bending Moments ◽  
Regular Waves ◽  
Large Wave ◽  
Towing Tank ◽  
Segmented Model ◽  
Model Experiments ◽  
Slamming Load ◽  
Wave Induced

The effect of various centre bow lengths on the motions and wave-induced slamming loads on wave-piercing catamarans is investigated. A 2.5 m hydroelastic segmented model was tested with three different centre bow lengths and towed in regular waves in a towing tank. Measurements were made of the model motions, slam loads and vertical bending moments in the model demi-hulls. The model experiments were carried out for a test condition equivalent to a wave height of 2.68 m and a speed of 20 knots at full scale. Bow accelerations and vertical bending moments due to slamming showed significant changes with the change in centre bow, the longest centre bow having the highest wave-induced loads and accelerations. The increased volume of displaced water which is constrained beneath the bow archways is identified as the reason for this increase in the slamming load. In contrast it was found that the length of centre bow has a relatively small effect on the heave and pitch motions in slamming conditions.

Shallow Water Wave Height Parameters

1984 ◽  
Vol 110 (2) ◽  
pp. 293-299 ◽  
Author(s):  
Edward F. Thompson ◽  
C. Linwood Vincent
Keyword(s):  
Shallow Water ◽  
Wave Height ◽  
Water Wave ◽  
Shallow Water Wave

scholarly journals LARGE-SCALE LABORATORY EXPERIMENTS AND NUMERICAL MODELING OF WAVE FORCE AND PRESSURE ACTING ON THE URBAN STRUCTURES

2020 ◽  
pp. 28
Author(s):  
Dayeon Lee ◽  
Sungwon Shin ◽  
Hyoungsu Park ◽  
Dan Cox
Keyword(s):  
Sea Level ◽  
Large Scale ◽  
Wave Force ◽  
High Elevation ◽  
Coastal Communities ◽  
Submerged Breakwater ◽  
Sea Levels ◽  
Urban Structures ◽  
Overland Flows ◽  
Hard Structures

Low lying coastal communities are most vulnerable to the flooding which causes from sea-level rise (SLR), and extreme coastal flooding events such as hurricanes and tsunami. Notably, the high elevation of sea-levels due to SLR and local tidal conditions could accelerate the damages on the coastal communities. Hard coastal structures such as a submerged breakwater and seawall would consider minimizing the impacts of overland flows to the urban area from the extreme coastal events, but the effectiveness of those hard structures are significantly alter depending on the various waves and sea-level conditions.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/GCOOpB4C3tA

Sign in / Sign up

Export Citation Format

Share Document