Curvature Estimation for Metrology of Non-Rigid Parts

2013 ◽  
Author(s):  
Ali Aidibe ◽  
Souheil-Antoine Tahan
Keyword(s):  
Residual Stresses ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Cad Model ◽  
New Approach ◽  
Profile Deviation ◽  
Defect Area ◽  
Computer Aided ◽  
Curvature Estimation ◽  
Aided Design

At the end of the manufacturing process, engineers need to know if a manufactured part fits its computer-aided design (CAD) model and how is the amplitude of inherent variation of manufacturing process. Non-rigid parts, at free state condition, may have a significant different form than their CAD model due to gravity loads; residual stresses induced distortion and/or assembly load. Today, a complicated and expensive specialized fixture is needed to conform these parts. To tackle the above challenges, we present in this paper a new approach for metrology of fixtureless non-rigid parts. This approach combines the curvature properties of manufactured parts with the extreme value statistic test as identification method to distinguish profile deviation due to the manufacturing process from part’s deformation due to the flexibility of the part and to determine whether the tolerance fits the CAD model or no. This approach is tested on simulated typical industrial sheet metal giving satisfying results in terms of percentage of errors in defect area and in peak profile deviation estimated.

Laser Additive Manufacturing

3D Printing ◽  
2017 ◽  
pp. 154-171 ◽  
Author(s):  
Rasheedat M. Mahamood ◽  
Esther T. Akinlabi
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Cad Model ◽  
Laser Additive Manufacturing ◽  
Computer Aided ◽  
Manufacturing Technologies ◽  
Aided Design

Laser additive manufacturing is an advanced manufacturing process for making prototypes as well as functional parts directly from the three dimensional (3D) Computer-Aided Design (CAD) model of the part and the parts are built up adding materials layer after layer, until the part is competed. Of all the additive manufacturing process, laser additive manufacturing is more favoured because of the advantages that laser offers. Laser is characterized by collimated linear beam that can be accurately controlled. This chapter brings to light, the various laser additive manufacturing technologies such as: - selective laser sintering and melting, stereolithography and laser metal deposition. Each of these laser additive manufacturing technologies are described with their merits and demerits as well as their areas of applications. Properties of some of the parts produced through these processes are also reviewed in this chapter.

Laser Additive Manufacturing

2016 ◽  
pp. 1-23 ◽  
Author(s):  
Rasheedat Modupe Mahamood ◽  
Esther Titilayo Akinlabi
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Cad Model ◽  
Laser Additive Manufacturing ◽  
Computer Aided ◽  
Manufacturing Technologies ◽  
Aided Design

Laser additive manufacturing is an advanced manufacturing process for making prototypes as well as functional parts directly from the three dimensional (3D) Computer-Aided Design (CAD) model of the part and the parts are built up adding materials layer after layer, until the part is competed. Of all the additive manufacturing process, laser additive manufacturing is more favoured because of the advantages that laser offers. Laser is characterized by collimated linear beam that can be accurately controlled. This chapter brings to light, the various laser additive manufacturing technologies such as: - selective laser sintering and melting, stereolithography and laser metal deposition. Each of these laser additive manufacturing technologies are described with their merits and demerits as well as their areas of applications. Properties of some of the parts produced through these processes are also reviewed in this chapter.

scholarly journals Automatized Evaluation of Students’ CAD Models

2021 ◽  
Vol 11 (4) ◽  
pp. 145
Author(s):  
Nenad Bojcetic ◽  
Filip Valjak ◽  
Dragan Zezelj ◽  
Tomislav Martinec
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Application ◽  
Test Cases ◽  
Cad Model ◽  
Computer Solution ◽  
3D Cad ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

The article describes an attempt to address the automatized evaluation of student three-dimensional (3D) computer-aided design (CAD) models. The driving idea was conceptualized under the restraints of the COVID pandemic, driven by the problem of evaluating a large number of student 3D CAD models. The described computer solution can be implemented using any CAD computer application that supports customization. Test cases showed that the proposed solution was valid and could be used to evaluate many students’ 3D CAD models. The computer solution can also be used to help students to better understand how to create a 3D CAD model, thereby complying with the requirements of particular teachers.

scholarly journals Framework of models for selecting manufacturing processes and associated parameters for surface topographies

2019 ◽  
Vol 20 (3) ◽  
pp. 301
Author(s):  
Benoit Rosa ◽  
Maxence Bigerelle ◽  
Antoine Brient ◽  
Serge Samper
Keyword(s):  
Specific Surface ◽  
Surface Finish ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Manufacturing Processes ◽  
Operating Parameters ◽  
Electro Discharge Machining ◽  
Surface Topographies ◽  
Computer Aided ◽  
Aided Design

Choosing appropriate manufacturing processes to create functional surfaces is a challenging issue for some industrials. A specific surface finish can be obtained by different manufacturing processes, each of them having a different economic impact. Currently, no tool could guarantee the surface function through the choice of a manufacturing process and its associated operating parameters. This paper aims at discussing about a framework of models for selecting conventional or innovative manufacturing processes and their associated parameters with regards to surface topographies and textures. To achieve this, a concept of decomposition of database is introduced. Manufacturing processes such as, electro discharge machining, water jet machining (used for texturing surfaces), sandblasting and laser cladding are modelled. Finally, a concept that links such a database with computer aided design (CAD) software in order to integrate surfaces functionalities and manufacturing processes directly into the design step is discussed.

Computer aided design (CAD) model search and retrieval using frequency domain file conversion

2020 ◽  
Vol 36 ◽  
pp. 101554
Author(s):  
Wenjin Li ◽  
Gary Mac ◽  
Nektarios Georgios Tsoutsos ◽  
Nikhil Gupta ◽  
Ramesh Karri
Keyword(s):  
Frequency Domain ◽  
Computer Aided Design ◽  
Cad Model ◽  
Model Search ◽  
Computer Aided ◽  
Aided Design ◽  
Search And Retrieval

A CAD Template Approach to Support Web-Based Customer Centric Product Design

2005 ◽  
Vol 5 (4) ◽  
pp. 381-387 ◽  
Author(s):  
Zahed Siddique ◽  
Karunakar Boddu
Keyword(s):  
Product Design ◽  
Design Process ◽  
Mass Customization ◽  
Computer Aided Design ◽  
Cad Model ◽  
Entire Family ◽  
Web Based ◽  
Computer Aided ◽  
Aided Design ◽  
Configurable Products

In order to provide products that can be tailored to the need of the customer, it is necessary to integrate the customer into the design process. In this paper we present a mass customization computer-aided design (CAD) framework that helps to integrate the customer into the design of user-configurable products. A template approach, which considers both modularity and scaling, is utilized to concisely represent a CAD model of the entire family. The system accepts user selections and parameters to automatically create a CAD model of the customized product in real time and then shows the model to the user. The system is implemented using PRO/ENGINEER and demonstrated through customization of bicycle frames.

Sign in / Sign up

Export Citation Format

Share Document