A Two-Parameter Method to Monitor and Characterize Tool Wear in End Milling Inconel 718

2012 ◽  
Author(s):  
W. Li ◽  
Y. B. Guo
Keyword(s):  
Tool Wear ◽  
Inconel 718 ◽  
Elevated Temperatures ◽  
Flank Wear ◽  
End Milling ◽  
Parameter Method ◽  
Manufacturing Cost ◽  
Cnc Machine ◽  
Coated Carbide ◽  
Two Parameter

Inconel 718 is among the most widely used superalloys in many industries. It is often used in very harsh conditions such as jet engines, combustors and nuclear reactors due to its high strength at elevated temperatures, high oxidation and corrosion resistance. Machining superalloy Inconel 718 has always been a challenging task due to its poor machinability including rapid work hardening, low thermal conductivity, and relatively short cutting tool life. The fast tool wear during cutting Inconel 718 results in longer production time, deteriorated surface integrity, and higher manufacturing cost. In this paper, an on-line optical tool monitoring system integrated with a CNC machine tool has been developed to examine tool wear evolutions in end milling Inconel 718 with PVD (Ti, Al) N/TiN-coated carbide insert. Three basic types of tool wear: flank wear, nose wear, and crater wear were examined and analyzed. A two-parameter method has been proposed to evaluate both flank wear and nose wear vs. cutting time.

Experimental Investigation on Tool Wear when End-Milling Inconel 718 with Coated Carbide Inserts

2011 ◽  
Vol 188 ◽  
pp. 410-415 ◽  
Author(s):  
Yuan Wei Wang ◽  
Jian Feng Li ◽  
Z.M. Li ◽  
Tong Chao Ding ◽  
Song Zhang
Keyword(s):  
Tool Wear ◽  
Inconel 718 ◽  
Flank Wear ◽  
End Milling ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Radial Depth ◽  
Coated Carbide ◽  
Carbide Inserts

In this paper, some experiments were conducted to investigate tool wear when end-milling Inconel 718 with the TiAlN-TiN PVD coated carbide inserts. The worn tools were examined thoroughly under scanning electron microscope (SEM) with Energy Dispersive X-ray Spectroscopy and 3D digital microscope to expatiate tool wear morphologies and relevant mechanisms. The flank wear was uniformity in finishing milling process, and the average flank wear were selected as the criterion to study the effects of cutting parameters (cutting speed, feed per tooth, radial depth of cut, and axial depth of cut) on tool wear. Finally, the optimal combination of the cutting parameters for the desired tool life is obtained.

Tool Wear Behavior in Turning Inconel 718 with Coated Inserts

2012 ◽  
Vol 499 ◽  
pp. 348-352 ◽  
Author(s):  
Xiao Li Zhu ◽  
Song Zhang ◽  
X.L. Xu ◽  
H.G. Lv
Keyword(s):  
Tool Wear ◽  
Inconel 718 ◽  
Flank Wear ◽  
Wear Behavior ◽  
Cutting Tools ◽  
Three Dimensional ◽  
Cutting Condition ◽  
Tool Holder ◽  
Final Failure ◽  
Coated Carbide

In the present study, an experimental investigation has been carried out in an attempt to monitor tool wear progress in turning Inconel 718 with coated carbide inserts under the wet cutting condition. First, each experimental test was conducted with a new cutting edge and the turning process was stopped at a certain interval of time. Secondly, the indexable insert was removed from the tool holder and the flank wear of the insert was measured using a three-dimensional digital microscopy (VHX-600E); and then the insert was clamped into the tool holder for the next turning experiment. The final failure of tool wear surfaces were examined under a scanning electron microscope (SEM) equipped with an energy dispersive X-ray spectrometer (EDS). It is indicated that significant flank wear was the predominant failure mode, and the abrasive, adhesive and oxidation wear were the most dominant wear mechanisms which directly control the deterioration and final failure of the cutting tools.

The Effects of TiAlN and TiN Coating during End Milling of INCONEL 718

2014 ◽  
Vol 564 ◽  
pp. 566-571
Author(s):  
K. Kamdani ◽  
Sulaiman Hasan ◽  
Mohd Amri Lajis
Keyword(s):  
Tool Wear ◽  
Tool Life ◽  
Feed Rate ◽  
Inconel 718 ◽  
End Milling ◽  
Cutting Speed ◽  
Extreme Condition ◽  
Carbide Tool ◽  
Coated Carbide Tool ◽  
Coated Carbide

Inconel 718 is a registered trademark of Special Metals Corporation that refers to a family of austenitic nickel-chromium-based super alloys. This material usually being used or operate in high temperature and extreme condition like aerospace industry, turbocharger rotors and seals. This research presents an experimental study of the cutting force variation, surface roughness, tool life and tool wear in end milling Inconel 718. The experimental results showed that flank wear was the predominant failure mode affecting tool life for TiAlN and TiN coated carbide tool. TiAlN is the better coated tool than TiN because it produce better surface finish and resultant force. Feed rate is one of the parameter that effecting results in this experiment. The higher feed rate will shorten the life of the tool. Although for the cutting condition, the situation is quite different where the proper cutting speed will maintain the tool life and tool wear for cutting tool. The overall study shows that TiAlN coated carbide tool with cutting speed 100 m/min, depth of cut 0.5 mm and feed rate 0.1 mm/tooth is the optimum parameter in this experiment.

Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718

2014 ◽  
Vol 66 (3) ◽  
Author(s):  
M. A. Hadi ◽  
J. A. Ghani ◽  
C. H. Che Haron ◽  
M. S. Kasim
Keyword(s):  
Tool Wear ◽  
Chip Formation ◽  
Inconel 718 ◽  
End Milling ◽  
Wear Behavior ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Milling Operations ◽  
Milling Operation ◽  
Coated Carbide

A comprehensive study and FEM simulation of ball nose end milling on tool wear behavior and chip formation had been performed on Inconel 718 (nickle-based superalloy) under minimum quantity lubricant (MQL) condition. In this paper, the investigation was focusing on the comparison of up-milling and down-milling operations using a multi-layer TiAlN/AlCrN-coated carbide inserts. A various cutting parameters; depth of cut, feed rate and cutting speed were considered during the evaluation. The experimental results showed that down-milling operation has better results in terms of tool wear compared to up-milling operation. Chipping on cutting tool edge responsible to notch wear with prolong machining. It was observed that the chips formed in up-milling operation were segmented and continuous, meanwhile down-milling operation produced discontinuous type of chips.

Investigation on the Tool Wear Model and Equivalent Tool Life in End Milling Titanium Alloy Ti6Al4V

2018 ◽  
Author(s):  
Kai Guo ◽  
Bin Yang ◽  
Jie Sun ◽  
Vinothkumar Sivalingam
Keyword(s):  
Tool Wear ◽  
Titanium Alloys ◽  
Tool Life ◽  
End Milling ◽  
Cutting Speed ◽  
Carbide Tool ◽  
Wear Model ◽  
Wear Process ◽  
Coated Carbide Tool ◽  
Coated Carbide

Titanium alloys are widely utilized in aerospace thanks to their excellent combination of high-specific strength, fracture, corrosion resistance characteristics, etc. However, titanium alloys are difficult-to-machine materials. Tool wear is thus of great importance to understand and quantitatively predict tool life. In this study, the wear of coated carbide tool in milling Ti-6Al-4V alloy was assessed by characterization of the worn tool cutting edge. Furthermore, a tool wear model for end milling cutter is established with considering the joint effect of cutting speed and feed rate for characterizing tool wear process and predicting tool wear. Based on the proposed tool wear model equivalent tool life is put forward to evaluate cutting tool life under different cutting conditions. The modelling process of tool wear is given and discussed according to the specific conditions. Experimental work and validation are performed for coated carbide tool milling Ti-6Al-4V alloy.

EFFECT OF CUTTING PARAMETERS ON CUTTING ZONE IN CRYOGENIC HIGH SPEED MILLING OF INCONEL 718 ALLOY

2015 ◽  
Vol 77 (27) ◽  
Author(s):  
A. H. Musfirah ◽  
J. A. Ghani ◽  
C. H. Che Haron ◽  
M. S. Kasim
Keyword(s):  
Surface Roughness ◽  
Inconel 718 ◽  
End Milling ◽  
Cutting Temperature ◽  
Cryogenic Cooling ◽  
Cutting Condition ◽  
Dry Machining ◽  
Part Quality ◽  
Cutting Zone ◽  
Coated Carbide

In tribology phenomenon, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in ball end milling process. Experiments were performed using a multi-layer TiAlN/AlCrN-coated carbide inserts under cryogenic and dry cutting condition. A transient milling simulation model using Third Wave Advantedge has been done in order to gain in-depth understanding of the thermomechanical aspects of machining and their influence on resulted part quality. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can  decrease the amount of heat transferred to the tool up to almost 70% and improve the surface roughness to a maximum of 31% when compared with dry machining. Furthermore, the microstructure of machined workpiece revealed that cryogenic cooling also can reduce a plastic deformation at the cutting surface as compared with the dry machining. 

scholarly journals Tool wear estimation in turning of Inconel 718 based on wavelet sensor signal analysis and machine learning paradigms

2020 ◽  
Vol 14 (5-6) ◽  
pp. 693-705
Author(s):  
Tiziana Segreto ◽  
Doriana D’Addona ◽  
Roberto Teti
Keyword(s):  
Machine Learning ◽  
Tool Wear ◽  
Inconel 718 ◽  
Signal Analysis ◽  
Elevated Temperatures ◽  
Wavelet Packet ◽  
Research Work ◽  
High Strength ◽  
Signal Features ◽  
Tool Wear Estimation

AbstractIn the last years, hard-to-machine nickel-based alloys have been widely employed in the aerospace industry for their properties of high strength, excellent resistance to corrosion and oxidation, and long creep life at elevated temperatures. As the machinability of these materials is quite low due to high cutting forces, high temperature development and strong work hardening, during machining the cutting tool conditions tend to rapidly deteriorate. Thus, tool health monitoring systems are highly desired to improve tool life and increase productivity. This research work focuses on tool wear estimation during turning of Inconel 718 using wavelet packet transform (WPT) signal analysis and machine learning paradigms. A multiple sensor monitoring system, based on the detection of cutting force, acoustic emission and vibration acceleration signals, was employed during experimental turning trials. The detected sensor signals were subjected to WPT decomposition to extract diverse signal features. The most relevant features were then selected, using correlation measurements, in order to be utilized in artificial neural network based machine learning paradigms for tool wear estimation.

Progressive Tool Failure in High Speed End Milling of Inconel 718 with Coated Carbide Inserts

2011 ◽  
Vol 188 ◽  
pp. 32-37 ◽  
Author(s):  
An Hai Li ◽  
Jun Zhao ◽  
Z.Q. Pei ◽  
S.G. Guo
Keyword(s):  
Abrasive Wear ◽  
Inconel 718 ◽  
Adhesive Wear ◽  
End Milling ◽  
Failure Mechanisms ◽  
Cutting Speed ◽  
Fatigue Wear ◽  
Edge Chipping ◽  
Tool Failure ◽  
Coated Carbide

The failure progression of coated carbide tools in end milling of Inconel 718 superalloy was investigated. Tool wear was measured and failure mechanisms were discussed in the experimental process periodically. The experimental results indicated that the tool failure mechanisms were synergistic interaction among abrasive wear, adhesive wear, and fatigue wear. However, abrasive wear and adhesive wear were the main failure mechanisms at the beginning, fatigue wear prevailed the upper hand around the time when edge chipping appeared, and after edge chipping abrasive wear and adhesive wear dominated until the failure time. In addition, the macroscopic failure of the cutting tools is closely correlated to the nucleation and propagation of the crack under cyclic mechanical and thermal impact forces. Mechanical fatigue wear was the key form of fatigue wear at lower cutting speed, while at higher cutting speed thermal fatigue wear was the dominant fatigue wear.

Investigation of the Machinability of Inconel 718 in Room Temperature and Preheated Conditions

2011 ◽  
Vol 264-265 ◽  
pp. 1187-1192
Author(s):  
A.K.M. Nurul Amin ◽  
A. Fakhruzi Majed ◽  
M.K. Daud ◽  
Anayet Ullah Patwari ◽  
M.H. Ishtiyaq
Keyword(s):  
Inconel 718 ◽  
Room Temperature ◽  
End Milling ◽  
Chip Morphology ◽  
Material Surface ◽  
Work Piece ◽  
Aerospace Materials ◽  
Space Navigation ◽  
Preheating Temperature ◽  
Coated Carbide

Inconel 718 is widely used in the aviation, space, navigation and shipping industries because of its outstanding properties. The very mechanical characteristics that give this alloy the highly valued properties also make it one of the most difficult-to-machine aerospace materials. Due to the hardness of nickel-based super-alloys, such as Inconel 718, advanced tools like ceramics have been recommended to machine them. But ceramics are low conductive materials, and the heat generated during the machining of Inconel 718 transfers very slowly through them. The accumulation of generated heat on the cutting edges of ceramic tools causes many problems and sometime leads to premature tool failure. Hence in this study the effectiveness of PVD TiAlN coated carbide insert has been investigated. One approach to overcome the difficulties in machining of Inconel 718 is to use an external heat source to soften the work material surface layer to be removed in order to decrease its tensile strength. A new approach of preheating using inducting heating as an economical alternative to Laser Assisted Machining for end milling of Inconel 718 is presented in this paper. The machinability of Inconel 718 under varying conditions is evaluated by examining tool wear, surface roughness and chip morphology. With increasing work-piece preheating temperature, from room temperature to 420 °C, the advantages of Induction heating is demonstrated by an extended tool life and better surface finish due to more stable chip formation and elimination of micro and macro failure of the tool.

Sign in / Sign up

Export Citation Format

Share Document