Effect of Process Parameters on Compressive Properties of ULTEM 9085 Produced by FDM Process

2018 ◽  
Author(s):  
Aboma Wagari Gebisa ◽  
Hirpa G. Lemu
Keyword(s):  
Process Parameters ◽  
High Performance ◽  
Fused Deposition Modeling ◽  
Compressive Strain ◽  
Processing Parameters ◽  
Air Gap ◽  
Layer By Layer ◽  
Compressive Properties ◽  
Significant Interaction Effect ◽  
Fused Deposition

Fused deposition modeling (FDM), one of the additive manufacturing (AM) technologies, is a promising digital manufacturing technique that produces parts, layer by layer, by heating, extruding and depositing filaments of thermoplastic polymers. The properties of FDM-produced parts apparently depend on the processing parameters. These processing parameters have conflicting advantages that need to be investigated. This paper investigates the effect of process parameters on the compressive properties of parts produced by the FDM process. The study is carried out on a high performance polymeric material called ULTEM 9085. Full factorial design of experiment is used to analyze the effects of process parameters on the compressive properties of the material. Five parameters: namely, air gap, raster width, raster angle, contour number and contour width, of the FDM machine are considered in the current study. The results show that, with the exception of the raster width, all other considered parameters have significant interaction effect on the compressive strength. For the compressive strain, air gap, contour number and contour width showed substantial interaction effects.

scholarly journals Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review

2021 ◽  
Vol 5 (1) ◽  
pp. 29
Author(s):  
Narongkorn Krajangsawasdi ◽  
Lourens G. Blok ◽  
Ian Hamerton ◽  
Marco L. Longana ◽  
Benjamin K. S. Woods ◽  
...  
Keyword(s):  
Process Parameters ◽  
Mechanical Performance ◽  
Fibre Length ◽  
Processing Parameters ◽  
Thermoplastic Composite ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Fibre Reinforced Polymer ◽  
Printing Parameters

Fused deposition modelling (FDM) is a widely used additive layer manufacturing process that deposits thermoplastic material layer-by-layer to produce complex geometries within a short time. Increasingly, fibres are being used to reinforce thermoplastic filaments to improve mechanical performance. This paper reviews the available literature on fibre reinforced FDM to investigate how the mechanical, physical, and thermal properties of 3D-printed fibre reinforced thermoplastic composite materials are affected by printing parameters (e.g., printing speed, temperature, building principle, etc.) and constitutive materials properties, i.e., polymeric matrices, reinforcements, and additional materials. In particular, the reinforcement fibres are categorized in this review considering the different available types (e.g., carbon, glass, aramid, and natural), and obtainable architectures divided accordingly to the fibre length (nano, short, and continuous). The review attempts to distil the optimum processing parameters that could be deduced from across different studies by presenting graphically the relationship between process parameters and properties. This publication benefits the material developer who is investigating the process parameters to optimize the printing parameters of novel materials or looking for a good constituent combination to produce composite FDM filaments, thus helping to reduce material wastage and experimental time.

Improvement in Tensile Strength of FDM Built Parts by Parametric Control

2014 ◽  
Vol 592-594 ◽  
pp. 1075-1079 ◽  
Author(s):  
Swayam Bikash Mishra ◽  
Siba Sankar Mahapatra
Keyword(s):  
Tensile Strength ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Optimal Parameter ◽  
Layer By Layer ◽  
3D Objects ◽  
Fused Deposition ◽  
Solid Models ◽  
Raster Angle ◽  
Deposition Modeling

Fused Deposition Modeling (FDM) is one of the efficient rapid prototyping (RP) technologies that forms 3D objects by adding material layer by layer from CAD generated solid models. However, the FDM built part is hardly anisotropic in nature due to layer-by-layer build mechanism. Literature suggests that mechanical property, especially tensile strength, of FDM built part is severely affected by process parameters. Among all the parameters, contour number happens to be an important parameter because it reduces stress concentration resulting in avoidance of premature breakdown. Therefore, in this work contour number along with five important process parameters such as layer thickness, raster width, part orientation, raster angle and air gap are considered and their effect on tensile strength of FDM built parts is studied. Experiments are conducted using Face Centred Central Composite Design (FCCCD) in order to reduce the experimental runs. An optimal parameter setting has been suggested for the maximisation of tensile strength of the FDM built parts.

Direct Simulation of Polymer Fused Deposition Modeling (FDM) — An Implementation of the Multi-Phase Viscoelastic Solver in OpenFOAM

2019 ◽  
Vol 17 (01) ◽  
pp. 1844002 ◽  
Author(s):  
Jun Liu ◽  
Kelly L. Anderson ◽  
N. Sridhar
Keyword(s):  
Fused Deposition Modeling ◽  
Processing Parameters ◽  
Final Part ◽  
Print Quality ◽  
Layer By Layer ◽  
Processing Conditions ◽  
Part Quality ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Multi Phase

Among the many mature and commercial AM technologies, fused deposition modeling (FDM) is a popular technology commonly used for modeling, prototyping, and production applications. In this process, a filament thermoplastic material is fed into a liquefier chamber, melted to a liquid state, and deposited layer by layer through a nozzle to form the 3D part. As a result, part can be designed in a more freedom way, and fabricated quickly and rapidly to a desired shape. However, different combination of processing parameters may influence the final part quality greatly, which hinders wider application of this technique. In order to investigate the influence of processing parameters on the final part quality, a viscoelastic multi-phase solver is developed, with capability for dynamic meshing and based on OpenFOAM. The solver directly simulates the deposition process of FDM. By implementing this solver for different boundary conditions and geometry, we can evaluate the printed part quality for varied processing conditions. More importantly, the tool enables efficient optimization of the processing conditions for specified material parameters and desired print quality.

scholarly journals Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 656 ◽  
Author(s):  
Li ◽  
Zhao ◽  
Li ◽  
Yang ◽  
Wang
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Fused Deposition Modeling ◽  
Cost Effective ◽  
Flexural Properties ◽  
Layer By Layer ◽  
Micro Computed Tomography ◽  
Fused Deposition ◽  
Building Orientation ◽  
Cost Effective Method

Fused deposition modeling possesses great advantages in fabricating high performance composites with controllable structural designs. As such, it has attracted attention from medical, automatic, and aerospace fields. In this paper, the influence of short carbon fibers (SCFs) and the orthogonal building orientation on the flexural properties of printed polyether ether ketone (PEEK) composites are systematically studied. The results show that the addition of SCFs raises the uniform nucleation process of PEEK during 3D printing, decreases the layer-to-layer bonding strength, and greatly changes the fracture mode. The flexural strength of vertically printed PEEK and its CF-reinforced composites show strengths that are as high as molded composites. X-ray micro-computed tomography reveals the microstructure of the printed composites and the transformation of pores during bending tests, which provides evidence for the good mechanical properties of the vertically printed composites. The effect of multi-scale factors on the mechanical properties of the composites, such as crystallization in different positions, layer-by-layer bonding, and porosity, provide a successful interpretation of their fracture modes. This work provides a promising and cost-effective method to fabricate 3D printed composites with tailored, orientation-dependent properties.

OPTIMIZATION OF PROCESS PARAMETERS IN FUSED DEPOSITION MODELING USING WEIGHTED PRINCIPAL COMPONENT ANALYSIS

2011 ◽  
Vol 10 (02) ◽  
pp. 241-259 ◽  
Author(s):  
ANOOP KUMAR SOOD ◽  
VEDANSH CHATURVEDI ◽  
SAURAV DATTA ◽  
SIBA SANKAR MAHAPATRA
Keyword(s):  
Principal Component Analysis ◽  
Layer Thickness ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Principal Component ◽  
Air Gap ◽  
Fused Deposition ◽  
Raster Angle ◽  
Deposition Modeling ◽  
Single Response

Fused deposition modeling (FDM) is a process by which functional parts can be produced rapidly through deposition of fused layers of material according to a numerically defined cross-sectional geometry. Literature suggests that process parameters largely influence on quality characteristics of rapid prototyping (RP) parts. A functional part is subjected to different loading conditions in actual practice. Therefore, process parameters need to be determined in such a way that they collectively optimize more than one response simultaneously. To address this issue, effect of important process parameters viz., layer thickness, orientation, raster angle, raster width, and air gap have been studied. The responses considered in this study are mechanical property of FDM produced parts such as tensile, bending and impact strength. The multiple responses are converted into a single response using principal component analysis (PCA) so that influence of correlation among the responses can be eliminated. Resulting single response is nothing but the weighted sum of three principal components that explain almost hundred percent of variation. The experiments have been conducted in accordance with Taguchi's orthogonal array to reduce the experimental runs. The results indicate that all the factors such as layer thickness, orientation, raster angle, raster width and air gap and interaction between layer thickness and orientation significantly influence the response. Optimum parameter settings have been identified to simultaneously optimize three responses. The mechanism of failure is explained with the help of SEM micrographs.

scholarly journals Influence of orientation on mechanical properties in fused deposition modelling

2020 ◽  
Vol 68 (4) ◽  
pp. 4-8
Author(s):  
Suzana Kutnjak-Mravlinčić ◽  
Ana Pilipović ◽  
Damir Godec
Keyword(s):  
Mechanical Properties ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Processing Parameters ◽  
Flexural Properties ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Working Space ◽  
Small Series

In the footwear industry, increasing attention is paid to design-shaped heels. But that design involves production of the complicated geometry, personalised heels (i.g. small series), light weight heels and if possible cheap production. Technology that enables and combines that is additive manufacturing (AM). One of AM low budget technology and machine is fused deposition modeling (FDM). In FDM, product is built layer by layer and with different types and density of inside mesh structures which enables complex geometry and low mass. When walking, the heel is loaded from above with compression force of the person's weight, while lateral, heel is loaded with flexural force and impact. Considering the design of the heel itself, it is necessary to orientate the product correctly in the working space of the machine. Orientation further raises the question of mechanical properties on such produced heel. In this paper it is tested flexural properties of two different orientation considering production of the actual heel. Furthermore, the analysis of the processing parameters (layer thickness, infill density and temperature) have been done to determine their influence on the flexural properties in these two orientations.

Additive manufacturing of fused deposition modeling for carbon fiber-PLA (CF-PLA) composites: The effects of tensile and flexural properties of process parameters

2021 ◽  
Author(s):  
Abhay Mishra ◽  
Vivek Srivastava ◽  
Nitin Gupta
Keyword(s):  
Carbon Fiber ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Processing Parameters ◽  
Variance Analysis ◽  
Flexural Properties ◽  
3D Cad ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Factor Design

Abstract In this paper the effect of process parameters on the tensile and flexural properties has been analyzed. We have used commercially available FDM 3D printer and material (Carbon fiber -PLA). When various processing parameters, especially when no linear processing parameters are defined, the complete factor design of experiments (DOE) is hard to research. Furthermore, a large number of samples are needed to completely exploit the exact processing parameters. The key effects of four processing parameters for the FDM process, i.e. layer height, infill density, printing speed and infill pattern, are examined in this document in the DOE of Taguchi. The mechanical characteristics of the fabricated FDM components express the power of the processing parameters. We have used the Taguchi L9 range of 9 runs with three specimens each to present the work, so 54 different processes were used to make a total of 54 specimens. In comparison to the 3D CAD model, the measurements of the manufactured specimens were tested according to standard ASTM D638 and ASTM D790. Variance analysis (ANOVA) is generated using Design Expert tools in order to assess the importance of variables and their tensile and flexural strength interactions. After doing Variance analysis (ANOVA) we got the exact parameters in which the mechanical properties are higher.

An Update on the Use of Alginate in Additive Biofabrication Techniques

2019 ◽  
Vol 25 (11) ◽  
pp. 1249-1264 ◽  
Author(s):  
Amoljit Singh Gill ◽  
Parneet Kaur Deol ◽  
Indu Pal Kaur
Keyword(s):  
Fused Deposition Modeling ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Layer By Layer ◽  
Three Dimension ◽  
Anionic Polymer ◽  
Fused Deposition ◽  
The Status ◽  
Deposition Modeling ◽  
Extrusion Printing

Background: Solid free forming (SFF) technique also called additive manufacturing process is immensely popular for biofabrication owing to its high accuracy, precision and reproducibility. Method: SFF techniques like stereolithography, selective laser sintering, fused deposition modeling, extrusion printing, and inkjet printing create three dimension (3D) structures by layer by layer processing of the material. To achieve desirable results, selection of the appropriate technique is an important aspect and it is based on the nature of biomaterial or bioink to be processed. Result & Conclusion: Alginate is a commonly employed bioink in biofabrication process, attributable to its nontoxic, biodegradable and biocompatible nature; low cost; and tendency to form hydrogel under mild conditions. Furthermore, control on its rheological properties like viscosity and shear thinning, makes this natural anionic polymer an appropriate candidate for many of the SFF techniques. It is endeavoured in the present review to highlight the status of alginate as bioink in various SFF techniques.

Sign in / Sign up

Export Citation Format

Share Document