The Effects of Carbon Fiber Misalignment on Material Composite Strength

2016 ◽  
Author(s):  
Luke Stangler ◽  
Jikai Du
Keyword(s):  
Elastic Modulus ◽  
Carbon Fiber ◽  
Fiber Length ◽  
Transversely Isotropic ◽  
Ultrasonic Waves ◽  
Visual Approach ◽  
The Mean ◽  
Fiber Misalignment ◽  
Material Composite

Nondestructive Evaluation (NDE) is an effective way for determining material properties. More specifically, ultrasonic waves along with visual measurements from a microscope can be used to systematically determine the elastic modulus of single ply composites that are subject to an altered manufacturing process. In this approach, the magnitudes of specific ultrasonic wave velocities are applied through Chirstoffel’s equations to determine the necessary five elastic constants that describe the elastic modulus of transversely isotropic composites. On the other hand, fiber misalignment measurements are taken through via digital microscopy to satisfy a statistical approach for the determination of the same elastic modulus. The Paper Physics Approach (PPA) and Laminate Analogy Approach (LAA) are utilized to predict the elastic modulus of unidirectional carbon fiber samples. A two parameter Weibull distribution is expected to satisfy the probability density of the fiber length and fiber orientation variation which will then be implemented into the Halpin-Tsai equations that will determine the elastic modulus. In terms of results, the mean fiber length from the visual approach is approximately 250 μm and the mean fiber misalignment is just over 3°. The elastic moduli range from 7 GPa to 9 GPa depending on the approach. Destructive mechanical testing led to an average elastic modulus value of 8.49 GPa.

Determination of transverse flexural and shear moduli of chopped carbon fiber tape-reinforced thermoplastic by vibration

2017 ◽  
Vol 52 (3) ◽  
pp. 395-404
Author(s):  
Xiuqi Lyu ◽  
Jun Takahashi ◽  
Yi Wan ◽  
Isamu Ohsawa
Keyword(s):  
Carbon Fiber ◽  
Beam Theory ◽  
Transversely Isotropic ◽  
High Volume ◽  
Bending Test ◽  
Thermoplastic Material ◽  
Shear Moduli ◽  
High Volume Production ◽  
Volume Production

Chopped carbon fiber tape-reinforced thermoplastic material is specifically developed for the high-volume production of lightweight automobiles. With excellent design processability and flexibility, the carbon fiber tape-reinforced thermoplastic material is manufactured by compressing large amounts of randomly oriented, pre-impregnated unidirectional tapes in a plane. Therefore, the carbon fiber tape-reinforced thermoplastic material presents transversely isotropic properties. Transverse shear effect along the thickness direction of carbon fiber tape-reinforced thermoplastic beam has a distinct influence on its flexural deformation. Accordingly, the Timoshenko beam theory combined with vibration frequencies was proposed to determine the set of transverse flexural and shear moduli. Meanwhile, the transverse flexural and shear moduli of carbon fiber tape-reinforced thermoplastic beam were finally determined by fitting all the first seven measured and calculated eigenfrequencies with the least squares criterion. In addition, the suggested thickness to length ratio for the 3-point bending test and Euler–Bernoulli model was given.

In Vivo Determination of Elastic Modulus of Canine Cardiac Muscle

1972 ◽  
Vol 94 (4) ◽  
pp. 912-916 ◽  
Author(s):  
J. F. Lafferty ◽  
E. P. McCutcheon ◽  
J. E. Funk ◽  
A. M. Higgins
Keyword(s):  
Elastic Modulus ◽  
Left Ventricle ◽  
Circumferential Stress ◽  
Isotonic Saline ◽  
Strain Analysis ◽  
Volume Data ◽  
Rapid Injection ◽  
The Mean

A practical technique was developed for in vivo determinations of the mechanical properties of canine left ventricle. A “quick stretch” was accomplished by rapid injection of isotonic saline into the ventricle during isovolumetric systole. The experimental pressure-volume data and a stress-strain analysis of the left ventricle as a thick-walled sphere permitted determination of the effective elastic modulus as a function of the mean circumferential stress. The elastic modulus E was found to be a linear function of the mean tangential stress σ throughout the isovolumetric systolic period; the slope (K, modulus of stiffness) of the Eversus σ curve was 18.8 with a standard deviation of 0.9.

Detection of Circulating Tissue Factor and Factor VII in a Normal Population

1996 ◽  
Vol 75 (05) ◽  
pp. 772-777 ◽  
Author(s):  
Sybille Albrecht ◽  
Matthias Kotzsch ◽  
Gabriele Siegert ◽  
Thomas Luther ◽  
Heinz Großmann ◽  
...  
Keyword(s):  
Tissue Factor ◽  
Normal Population ◽  
Mean Value ◽  
Factor Vii ◽  
Significant Difference ◽  
Age Dependent ◽  
The Mean ◽  
Highly Correlated ◽  
And Gender

SummaryThe plasma tissue factor (TF) concentration was correlated to factor VII concentration (FVIIag) and factor VII activity (FVIIc) in 498 healthy volunteers ranging in age from 17 to 64 years. Immunoassays using monoclonal antibodies (mAbs) were developed for the determination of TF and FVIIag in plasma. The mAbs and the test systems were characterized. The mean value of the TF concentration was 172 ± 135 pg/ml. TF showed no age- and gender-related differences. For the total population, FVIIc, determined by a clotting test, was 110 ± 15% and the factor VIlag was 0.77 ± 0.19 μg/ml. FVII activity was significantly increased with age, whereas the concentration demonstrated no correlation to age in this population. FVII concentration is highly correlated with the activity as measured by clotting assay using rabbit thromboplastin. The ratio between FVIIc and FVIIag was not age-dependent, but demonstrated a significant difference between men and women. Between TF and FVII we could not detect a correlation.

Determination of Plasminogen in Clots and Thrombi

1966 ◽  
Vol 16 (01/02) ◽  
pp. 038-050 ◽  
Author(s):  
Ulla Hedner ◽  
Inga Marie Nilsson ◽  
B Robertson
Keyword(s):  
Mean Value ◽  
Main Mechanism ◽  
Clot Lysis ◽  
Post Mortem ◽  
Digestion Time ◽  
Normal Volunteers ◽  
Casein Solution ◽  
The Mean

SummaryThe plasminogen content was determined by a casein method in plasma and serum from 20 normal volunteers. The mean plasminogen content was found to be 10.1 ACU (the arbitrary caseinolytic unit defined in such a way that using a 3% casein solution and a digestion time of 20 min. at 37°C, 10 ACU gave an extinction of 0.300). No difference between serum and plasma regarding the plasminogen content was found.Plasminogen was determined in drained and drained plus washed clots prepared from 2 ml plasma. The highest values found in the drained clots were 0.9 ACU/clot and 0.2 ACU/clot in the drained plus washed clots.Plasminogen was also determined in drained and drained plus washed clots prepared from plasma with added purified plasminogen. The plasminogen was recovered in the washing fluid. According to these tests, then, purified added plasminogen is washed out of the clots.The plasminogen content of 20 thrombi obtained post mortem was also determined. The mean value was found to be 0.7 ACU/cm thrombus. Judging from our results, the “intrinsic clot lysis theory” is not the main mechanism of clot dissolution.

SERUM TRIIODOTHYRONINE DETERMINATION BY SATURATION ANALYSIS

1973 ◽  
Vol 72 (4) ◽  
pp. 714-726 ◽  
Author(s):  
A. Burger ◽  
B. Miller ◽  
C. Sakoloff ◽  
M. B. Vallotton
Keyword(s):  
Ionic Strength ◽  
Limit Of Detection ◽  
Improved Method ◽  
Accuracy Of Measurement ◽  
Tracer Amount ◽  
The Mean ◽  
Physiological Values ◽  
Hyperthyroid Patients ◽  
Solvent Blank

ABSTRACT An improved method for the determination of serum triiodothyronine (T3) has been developed. After addition of a tracer amount of the hormone, T3 was extracted from 1 ml serum under conditions of pH and ionic strength which favoured T3 extraction (89%) over thyroxine (T4) extraction (58%). Chromatography of the extracted material on Sephadex LH-20 separated T3 completely from residual T4. The T3 eluate was dried, then re-dissolved in 0.5 ml NaOH 0.04 n. To 0.2 ml duplicate aliquots, a standard amount of TBG was added for the competitive protein analysis. After one hour incubation at 4°C, separation of bound from free T3 was achieved on small Sephadex G-25 columns. Overall recovery was 67 ± 10.8% and correction for the loss was made. The solvent blank was 37 ± 27 (sd) ng/100 ml. Accuracy of measurement of known quantities of T3 added to serum was 98.4%. The coefficient of variation within the assay was 6.2% and between the assays it was 11.4%. The limit of detection (0.1 ng) corresponded to a concentration of 25 ng/100 ml. T4 added to serum did not interfere with T3 determination until high non-physiological values were reached. The mean ± sd serum T3 in 54 euthyroid subjects was 153 ± 58 ng/100 ml and in 24 hyperthyroid patients it was 428 ±186 ng/100 ml; 4 out of the 24 hyperthyroid values were within 2 sd of the mean euthyroid group. All the values found in the euthyroid group were well above the limit of detection of the method.

Determination of the Probability Distribution of the Mean Sound Level

2010 ◽  
Vol 35 (4) ◽  
pp. 543-550 ◽  
Author(s):  
Wojciech Batko ◽  
Bartosz Przysucha
Keyword(s):  
Probability Distribution ◽  
Probability Distribution Function ◽  
Mean Value ◽  
Sound Level ◽  
Function Form ◽  
Noise Levels ◽  
Logarithmic Mean ◽  
The Mean ◽  
Estimation Of Uncertainty

AbstractAssessment of several noise indicators are determined by the logarithmic mean <img src="/fulltext-image.asp?format=htmlnonpaginated&src=P42524002G141TV8_html\05_paper.gif" alt=""/>, from the sum of independent random resultsL1;L2; : : : ;Lnof the sound level, being under testing. The estimation of uncertainty of such averaging requires knowledge of probability distribution of the function form of their calculations. The developed solution, leading to the recurrent determination of the probability distribution function for the estimation of the mean value of noise levels and its variance, is shown in this paper.

Estimation of the Mean Fiber Length of Individual Grease Fleeces

1968 ◽  
Vol 27 (5) ◽  
pp. 1224
Author(s):  
Walter R. Harvey ◽  
Mary E. Hourihan ◽  
Clair E. Terrill
Keyword(s):  
Fiber Length ◽  
The Mean
Sign in / Sign up

Export Citation Format

Share Document