On Evaluating Efficiency of a Combined Power and Cooling Cycle

2002 ◽  
Author(s):  
Sanjay Vijayaraghavan ◽  
D. Yogi Goswami
Keyword(s):  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Combined Cycle ◽  
Maximum Efficiency ◽  
Second Law ◽  
Refrigeration Cycle ◽  
Absorption Refrigeration ◽  
Cooling Cycle ◽  
Reduced Gradient ◽  
Generalized Reduced Gradient

A combined power and cooling cycle is being investigated. The cycle is a combination of the Rankine cycle and an absorption refrigeration cycle. Evaluating the efficiency of this cycle is made difficult by the fact that there are two different simultaneous outputs, namely power and refrigeration. An efficiency expression has to appropriately weigh the cooling component in order to allow comparison of this cycle with other cycles. This paper develops several expressions for the first law, second law and exergy efficiency definitions for the combined cycle based on existing definitions in the literature. Some of the developed equations have been recommended for use over others, depending on the comparison being made. Finally, some of these definitions have been applied to the cycle and the performance of the cycle optimized for maximum efficiency. A Generalized Reduced Gradient (GRG) method was used to perform the optimization. The results of these optimizations are presented and discussed.

On Evaluating Efficiency of a Combined Power and Cooling Cycle

2003 ◽  
Vol 125 (3) ◽  
pp. 221-227 ◽  
Author(s):  
Sanjay Vijayaraghavan ◽  
D. Y. Goswami
Keyword(s):  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Combined Cycle ◽  
Maximum Efficiency ◽  
Second Law ◽  
Refrigeration Cycle ◽  
Absorption Refrigeration ◽  
Cooling Cycle ◽  
Reduced Gradient ◽  
Generalized Reduced Gradient

A combined power and cooling cycle is being investigated. The cycle is a combination of the Rankine cycle and an absorption refrigeration cycle. Evaluating the efficiency of this cycle is made difficult by the fact that there are two different simultaneous outputs, namely power and refrigeration. An efficiency expression has to appropriately weigh the cooling component in order to allow comparison of this cycle with other cycles. This paper develops several expressions for the first law, second law and exergy efficiency definitions for the combined cycle based on existing definitions in the literature. Some of the developed equations have been recommended for use over others, depending on the comparison being made. Finally, some of these definitions have been applied to the cycle and the performance of the cycle optimized for maximum efficiency. A Generalized Reduced Gradient (GRG) method was used to perform the optimization. The results of these optimizations are presented and discussed.

Analysis of a Combined Power and Refrigeration Cycle Working on Solar Energy

2008 ◽  
Author(s):  
Bijan Kumar Mandal ◽  
Kousik Sadhukhan ◽  
Achin Kumar Chowdhuri ◽  
Arup Jyoti Bhowal
Keyword(s):  
Solar Energy ◽  
Working Conditions ◽  
Exergy Efficiency ◽  
Combined Cycle ◽  
Cooling Effect ◽  
Second Law ◽  
Carnot Cycle ◽  
Refrigeration Cycle ◽  
Water Mixture ◽  
The Ideal

Thermodynamic analysis of a combined cycle producing power and refrigeration (cooling) effect simultaneously using solar energy has been analyzed. The working substance of the cycle is a binary mixture of ammonia and water. The effect of variation of absorber pressure, boiler pressure, boiler temperature and superheater temperature on the turbine work, refrigeration (cooling) effect and net output has been investigated. For different conditions of the above variables, the first law efficiency, the second law efficiency and the exergy efficiency of the cycle have been investigated. Since the ammonia water mixture boils at varying temperatures, Lorenz cycle instead of Carnot cycle is considered as the ideal cycle for this analysis. It is observed that the first law and the second law efficiencies are maximum under the same working conditions, but the exergy efficiency is maximum at some other working conditions. The maximum values of the first law, the second law and the exergy efficiencies are found to be 21.72%, 27.30% and 62.53% respectively.

Theoretical Analysis of Ammonia-Based Combined Power/Refrigeration Cycle at Low Refrigeration Temperatures

Solar Energy ◽  
2002 ◽  
Author(s):  
Shaoguang Lu ◽  
D. Yogi Goswami
Keyword(s):  
Low Temperatures ◽  
Working Fluid ◽  
Total Output ◽  
Second Law ◽  
Refrigeration Cycle ◽  
Thermal System ◽  
Water Mixture ◽  
Reduced Gradient ◽  
Generalized Reduced Gradient ◽  
Solar Thermal System

A new combined power/refrigeration cycle uses ammonia/water mixture as a working fluid to produce both power and refrigeration in the same cycle. The cycle may be designed for various combinations of power and refrigeration. In an earlier paper by the authors, the cycle was optimized for efficiency, with power as the main intended output. This study puts an emphasis on the refrigeration part of the total output especially at low refrigeration temperatures. The objective was to find out what kind of outputs could be obtained at very low temperatures for a possible application in the Mars mission. The thermal performance of this cycle at different refrigeration temperatures has been found. At each refrigeration temperature, the cycle is optimized for maximum second law efficiency using Generalized Reduced Gradient (GRG) algorithm. It is found that refrigeration temperatures as low as 205 K may be achieved using this cycle. Generally, both first and second law efficiencies decrease when refrigeration temperature drops. For a re-circulating type of solar thermal system with a source temperature of 360K, the first and second law efficiencies increase slightly as the refrigeration temperature goes down from 265K to 245K and then decrease with the refrigeration temperature, giving a maximum second law efficiency of 63.7% at 245K.

Optimization of a Novel Combined Power/Refrigeration Thermodynamic Cycle

Solar Energy ◽  
2002 ◽  
Author(s):  
Shaoguang Lu ◽  
D. Yogi Goswami
Keyword(s):  
Waste Heat ◽  
Thermodynamic Cycle ◽  
Cycle Performance ◽  
Working Fluid ◽  
Second Law ◽  
Optimum Conditions ◽  
Ambient Temperatures ◽  
Reduced Gradient ◽  
Generalized Reduced Gradient ◽  
Performance Conditions

A novel combined power/refrigeration thermodynamic cycle is optimized for thermal performance in this paper. The cycle uses ammonia-water binary mixture as a working fluid and can be driven by various heat sources, such as solar, geothermal and low temperature waste heat. It could produce power as well as refrigeration with power output as a primary goal. The optimization program, which is based on the Generalized Reduced Gradient (GRG) algorithm, can be used to optimize for different objective functions. Examples that maximize second law efficiency, work output and refrigeration output are presented, showing the cycle may be optimized for any desired performance parameter. In addition, cycle performance over a range of ambient temperatures was investigated. It was found that for a source temperature of 360K, which is in the range of flat plate solar collectors, both power and refrigeration outputs are achieved under optimum conditions. All performance parameters, including first and second law efficiencies, power and refrigeration output decrease as the ambient temperature goes up. On the other hand, for a source of 440K, optimum conditions do not provide any refrigeration. However, refrigeration can be obtained even for this temperature under non-optimum performance conditions.

scholarly journals Thermodynamic analysis and simulation of a new combined power and refrigeration cycle using artificial neural network

2011 ◽  
Vol 15 (1) ◽  
pp. 29-41 ◽  
Author(s):  
Abdolreza Fazeli ◽  
Hossein Rezvantalab ◽  
Farshad Kowsary
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Heat Source ◽  
Exergy Efficiency ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Water Mixture ◽  
Artificial Neural

In this study, a new combined power and refrigeration cycle is proposed, which combines the Rankine and absorption refrigeration cycles. Using a binary ammonia-water mixture as the working fluid, this combined cycle produces both power and refrigeration output simultaneously by employing only one external heat source. In order to achieve the highest possible exergy efficiency, a secondary turbine is inserted to expand the hot weak solution leaving the boiler. Moreover, an artificial neural network (ANN) is used to simulate the thermodynamic properties and the relationship between the input thermodynamic variables on the cycle performance. It is shown that turbine inlet pressure, as well as heat source and refrigeration temperatures have significant effects on the net power output, refrigeration output and exergy efficiency of the combined cycle. In addition, the results of ANN are in excellent agreement with the mathematical simulation and cover a wider range for evaluation of cycle performance.

A Totally Heat-Driven Refrigeration System Using Low-Temperature Heat Sources for Low-Temperature Applications

2019 ◽  
Vol 27 (02) ◽  
pp. 1950012 ◽  
Author(s):  
Zeynab Seyfouri ◽  
Mehran Ameri ◽  
Mozaffar Ali Mehrabian
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Water Mixture ◽  
Refrigeration System ◽  
Power Requirement ◽  
Temperature Heat

In the present study, a totally heat-driven refrigeration system is proposed and thermodynamically analyzed. This system uses a low-temperature heat source such as geothermal energy or solar energy to produce cooling at freezing temperatures. The proposed system comprises a Rankine cycle (RC) and a hybrid GAX (HGAX) refrigeration cycle, in which the RC provides the power requirement of the HGAX cycle. An ammonia–water mixture is used in both RC and HGAX cycles as the working fluid. A comparative study is conducted in which the proposed system is compared with two other systems using GAX cycle and/or a single stage cycle, as the refrigeration cycle. The study shows that the proposed system is preferred to produce cooling at temperatures from 2∘C to [Formula: see text]C. A detailed parametric analysis of the proposed system is carried out. The results of the analysis show that the system can produce cooling at [Formula: see text]C using a low-temperature heat source at 133.5∘C with the exergy efficiency of about 20% without any input power. By increasing the heat source temperature to 160∘C, an exergy efficiency of 25% can be achieved.

Biomass combined cycles based on externally fired gas turbines and organic Rankine expanders

2011 ◽  
Vol 225 (8) ◽  
pp. 1066-1075 ◽  
Author(s):  
C M Invernizzi ◽  
P Iora ◽  
R Sandrini
Keyword(s):  
Gas Turbines ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Combined Cycle ◽  
Economic Feasibility ◽  
Maximum Efficiency ◽  
Working Fluid ◽  
Inlet Temperature ◽  
System A ◽  
Combined Cycles

This article investigates the possibility to enhance the performance of a biomass organic Rankine cycle (ORC) plant by adding an externally fired gas turbine (EFGT), yielding a combined EFGT + ORC system. A typical ORC configuration is first modelled and validated on data available from an existing unit 1.5 MW reference plant. Then, different working fluids belonging to the methyl-substituted benzene series and linear methylpolysiloxanes have been evaluated for the ORC section on the basis of both thermodynamics considerations and design issues of the regenerator and the turbine. Results of the simulations of the combined cycle (CC) referred to a furnace size of about unit 9 MW, assuming a maximum GT inlet temperature of 800 °C, show a maximum efficiency of 23 per cent, obtained in the case where toluene is adopted as a working fluid for the bottoming section. This value is about 4 points per cent higher than the efficiency of the corresponding simple ORC. Finally, to conclude, some preliminary considerations are given regarding the techno-economic feasibility of the combined configuration, suggesting the need of a further investigation on the possible technological solution for the furnace which represents the main uncertainty in the resulting costs of the CC.

scholarly journals Thermodynamic Investigation of an Integrated Solar Combined Cycle with an ORC System

Entropy ◽  
2019 ◽  
Vol 21 (4) ◽  
pp. 428 ◽  
Author(s):  
Wang ◽  
Fu
Keyword(s):  
Solar Radiation ◽  
Thermal Efficiency ◽  
Unit Cost ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Combined Cycle ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Exhaust Gas Temperature

An integrated solar combined cycle (ISCC) with a low temperature waste heat recovery system is proposed in this paper. The combined system consists of a conventional natural gas combined cycle, organic Rankine cycle and solar fields. The performance of an organic Rankine cycle subsystem as well as the overall proposed ISCC system are analyzed using organic working fluids. Besides, parameters including the pump discharge pressure, exhaust gas temperature, thermal and exergy efficiencies, unit cost of exergy for product and annual CO2-savings were considered. Results indicate that Rc318 contributes the highest exhaust gas temperature of 71.2℃, while R113 showed the lowest exhaust gas temperature of 65.89 at 800 W/m2, in the proposed ISCC system. The overall plant thermal efficiency increases rapidly with solar radiation, while the exergy efficiency appears to have a downward trend. R227ea had both the largest thermal efficiency of 58.33% and exergy efficiency of 48.09% at 800W/m2. In addition, for the organic Rankine cycle, the exergy destructions of the evaporator, turbine and condenser decreased with increasing solar radiation. The evaporator contributed the largest exergy destruction followed by the turbine, condenser and pump. Besides, according to the economic analysis, R227ea had the lowest production cost of 19.3 $/GJ.

Effects of Various Types of Binary Cycles on Thermal and Exergy Efficiency of Combined Flash-Binary Power Plants

2012 ◽  
Author(s):  
Mahshid Vatani ◽  
Masoud Ziabasharhagh ◽  
Shayan Amiri
Keyword(s):  
Power Plants ◽  
Organic Rankine Cycle ◽  
Internal Heat ◽  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Maximum Efficiency ◽  
Working Fluid ◽  
Internal Heat Exchanger ◽  
Different Types ◽  
Geothermal Power

With the progress of technologies, engineers try to evaluate new and applicable ways to get high possible amount of energy from renewable resources, especially in geothermal power plants. One of the newest techniques is combining different types of geothermal cycles to decrease wastage of the energy. In the present article, thermodynamic optimization of different flash-binary geothermal power plants is studied to get maximum efficiency. The cycles studied in this paper are single and double flash-binary geothermal power plants of basic Organic Rankine Cycle (ORC), regenerative ORC and ORC with an Internal Heat Exchanger (IHE). The main gain due to using various types of ORC cycles is to determine the best and efficient type of the Rankine cycle for combined flash-binary geothermal power plants. Furthermore, in binary cycles choosing the best and practical working fluid is an important factor. Hence three different types of working fluids have been used to find the best one that gives maximum thermal and exergy efficiency of combined flash-binary geothermal power plants. According to results, the maximum thermal and exergy efficiencies both achieved in ORC with an IHE and the effective working fluid is R123.

A LNG Driven CCHP System with a Cold Energy Recovery Device

2011 ◽  
Vol 71-78 ◽  
pp. 1769-1775
Author(s):  
Heng Sun ◽  
Hong Mei Zhu ◽  
Dan Shu
Keyword(s):  
Rankine Cycle ◽  
High Energy ◽  
Primary Energy ◽  
Industrial Applications ◽  
Combined Cycle ◽  
Utilization Efficiency ◽  
Absorption Refrigeration ◽  
Cold Energy ◽  
Very High Energy ◽  
Very High

The CCHP system based on energy cascade utilization can get very high energy overall utilization efficiency. When LNG is used as the primary energy of a CCHP system, the higher efficiency can be obtained if the cold energy of LNG is recovered. Three CCHP systems integrated with LNG cold recovery facility are presented which are suitable for different situations. The thermodynamic calculation and analysis of the system consisting of combined cycle generating electricity, the LiBr absorption refrigeration units, the cryogenic Rankine cycle generation system and the cooling medium system were carried out. The results showed that the energy utility efficiency of the electricity generating was 34.78% and the total energy utility efficiency was up to 86.49%. This indicates that this technology have the potential to be employed in the industrial applications.

Sign in / Sign up

Export Citation Format

Share Document