Dynamic Characterization of Multi-Functional Sandwich Composites

2000 ◽  
Author(s):  
Uday K. Vaidya ◽  
Scott P. Nelson ◽  
Biju Mathew ◽  
Renee M. Rodgers ◽  
Mahesh V. Hosur
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
The Impact

Abstract This paper deals with an innovative integrated hollow (space) E-glass/epoxy core sandwich composite construction that possesses several multi-functional benefits in addition to the providing light-weight and bending stiffness advantages. In comparison to traditional foam and honeycomb cores, the integrated space core provides a means to route wires/rods, embed electronic assemblies, and store fuel and fire-retardant foam, among other conceivable benefits. In the current work the low velocity impact (LVI) response of innovative integrated sandwich core composites was investigated. Three thickness of integrated and functionality-embedded E-glass/epoxy sandwich cores were considered in this study — including 6mm, 9mm and 17 mm. The low-velocity impact results indicated that the hollow and functionality embedded integrated core suffered a localized damage state limited to a system of core members in the vicinity of the impact. Stacking of the core was an effective way of improving functionality and limiting the LVI damage in the sandwich plate. The functionality-embedded cores provided enhanced LVI resistance due to energy additional energy absorption mechanisms. The high strain rate (HSR) impact behavior of these sandwich constructions is also studied using a Split Hopkinson Pressure Bar (SHPB) at strain rates ranging from 163 to 653 per second. The damage initiation, progression and failure mechanisms under low velocity and high strain rate impact are investigated through optical and scanning electron microscopy.

Dynamic response of glass under low-velocity impact and high strain-rate SHPB compression loading

2016 ◽  
Vol 432 ◽  
pp. 432-439 ◽  
Author(s):  
Seyed Soheil Daryadel ◽  
P. Raju Mantena ◽  
Kiyun Kim ◽  
Damian Stoddard ◽  
A.M. Rajendran
Keyword(s):  
Dynamic Response ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Compression Loading

scholarly journals Ultrasonic Analysis of Damage in CFRP Resulting from Static Indentation and Low Velocity Impact

1993 ◽  
Vol 2 (3) ◽  
pp. 096369359300200
Author(s):  
H. Kaczmarek
Keyword(s):  
Impact Testing ◽  
Low Velocity Impact ◽  
Ultrasonic Tomography ◽  
Transverse Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Testing Procedures ◽  
Damage Initiation ◽  
Static Indentation ◽  
The Impact

In order to reduce hidden damage caused in CFRP by low velocity transverse impact, testing procedures must be established by understanding the impact phenomena and the roles of various parameters on damage initiation and growth. Hence, composite plates were stressed and an original method, “ultrasonic tomography,” was applied to detect delaminations on the interfaces. The results show the similarity of the damage growth resulting from static indentation and low velocity impact.

Low Velocity Impact of Flat and Doubly Curved Polycarbonate Panels

2015 ◽  
Vol 82 (4) ◽  
Author(s):  
G. O. Antoine ◽  
R. C. Batra
Keyword(s):  
Low Velocity Impact ◽  
Initial Slope ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Speed ◽  
Damage Initiation ◽  
Finite Element Software ◽  
Curved Panel ◽  
Panel Thickness ◽  
The Impact

Three-dimensional finite transient deformations of polycarbonate (PC) panels impacted at low velocity by a hemispherical-nosed rigid cylinder have been studied by using the commercial finite element software ls-dyna with a thermo–elasto–viscoplastic material model for the PC incorporated in it as a user defined subroutine. The implementation of the subroutine has been verified by comparing analytical and numerical solutions of simple initial-boundary-value problems. The mathematical model of the low velocity impact problem has been validated by comparing the computed and the experimental results for the maximum deflection and time histories of the centroidal deflection. It is found that the initial slope of the reaction force between the impactor and the panel versus the indentation for a curved panel can be nearly 20 times that for the flat panel of the same thickness as the curved panel. For the impact velocities considered, it is found that the maximum effective plastic strain in the PC shell near the center of impact and the dominant deformation mode there strongly depend on the panel curvature, the panel thickness, and the impact speed. Effects of the panel curvature, the panel thickness, and the impact speed on stresses and strains developed in a panel are delineated. This information should help designers of impact resistant transparent panels such as an airplane canopy, automobile windshield, and goggles. However, damage initiation and propagation, and the final indentation induced in the clamped panels have not been computed.

Impact Behaviour of Woven Natural Silk Composite Face-Sheet Sandwiched Foam under Low Velocity Impact

2013 ◽  
Vol 774-776 ◽  
pp. 1242-1249 ◽  
Author(s):  
Albert U. Ude ◽  
Ahmad K. Ariffin ◽  
Che H. Azhari
Keyword(s):  
Impact Load ◽  
Energy Levels ◽  
Low Velocity Impact ◽  
Face Sheet ◽  
Low Velocity ◽  
Velocity Impact ◽  
Natural Silk ◽  
Damage Initiation ◽  
The Impact ◽  
Composite Face

This paper describes the result of an experimental investigation on the impact damage on woven natural silk/epoxy composite face-sheet and PVC foam core sandwich panel. The test panels were prepared by hand-lay-up method. The low-velocity impact response of the composites sandwich panels is studied at three energy levels of 32, 48, and 64 joule respectively. The focus is to investigate damage initiation, damage propagation, and mechanisms of failure. It was observed that absorption energy capability decreased as impact energy increased. There was deflection on each impact load configuration at some point but their margin was insignificant. Physical examination of the specimen show that damage areas increased with increase in impact load. The novelty of this research is the use of woven natural silk fabric as a reinforcement fibre.

Performance of 3-D Printed Thermoplastic Polyurethane Under Quasi-Static and High-Strain Rate Loading

2016 ◽  
Author(s):  
S. Chaudhry ◽  
M. Al-Dojayli ◽  
A. Czekanski
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Kolsky Bar ◽  
Pulse Shaper ◽  
Input And Output ◽  
The Impact ◽  
Printing Direction ◽  
Printing Parameters

As 3-D printed materials are being embraced by the manufacturing industries, understanding the response mechanism to high strain rate events becomes a concern to meet requirements for a specific application. In order to improve the mechanical performance of a 3-D printed part, it is necessary to quantify the impact of various printing parameters on the mechanical properties. Initial studies have shown that a difference in 3-D printed material is expected due to the effect of manufacturing parameters such as anisotropy relating to printing direction, infill pattern, infill percentage, layer height and orientation of the part being printed. The main focus of the study is to characterize the effect of the previously mentioned printing parameters under quasi-static and high strain rate (100–1000 /s). In this strain rate regime, the most common apparatus used is the Split Hopkinson pressure bar (also known as Kolsky bar). It consists of a cylindrical metallic bar that has a striker, input and output bar. While the specimen is fixated between the input and output bar, the striker bar is accelerated and triggers the incident bar. As a result, an elastic wave is generated which travels towards the specimen/input bar interface, where some part of it is reflected and the rest is transmitted. The Kolsky bar is adjusted by using a hollow transmitter tube and pulse shaper. Due to an impedance mismatch between the samples and bar material, the amplitude of the transmitted pulse is low. Using a hollow transmitter bar increases this amplitude due to area mismatch between the specimen and tube. Using a pulse shaper between the striker and input bar, the rise time of the elastic compressive wave increases and assists in achieving a constant rate of loading. The compressive stress strain curves were obtained under high strain rates to determine the strain rate effect. To measure the response under static testing conditions, a commercial load frame was used. A comprehensive comparison of dynamic compressive response of samples was performed to characterize the effect of printing parameters.

EFFECT OF IMPACTOR MASS ON CFRP IN ARCTIC CONDITION UNDER LOW-VELOCITY IMPACT

2021 ◽  
Author(s):  
ARNOB BANIK ◽  
CHAO ZHANG ◽  
K. T. TAN
Keyword(s):  
Low Temperature ◽  
Composite Structures ◽  
Room Temperature ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
Thermal Chamber ◽  
Low Mass ◽  
The Impact

This study investigates the impact response and damage characterization of carbon fiber reinforced polymer (CFRP) under low-velocity impact by impactors of different masses and velocities at 62J. Low-velocity impacts are conducted at room temperature (23ºC) as well as low temperature (-70ºC) conditions in the thermal chamber of the drop tower testing machine, Instron CEAST 9350. The aim is to observe composite behavior in the cold Arctic environment due to equal energy impacts. Moreover, a 3mm thickness of ice is created on the CFRP samples at -12ºC after 24 hours of freezing and impacted at -70ºC. The goal is to elucidate the contribution of surface ice on the overall impact damage of composites. X-ray micro-computed tomography is utilized to reveal the inner damages of the composite structures. Intralaminar damage in the form of fiber breakage is found as the dominant failure mode on the CFRP samples from 62J impacts. But differences in the delamination and matrix crack formation are identified for different mass-velocity configurations and environmental conditions. Results show that low mass impactors produce a larger damage initiation force on the composites at all temperatures, whereas no specific trend is observed in the peak force values due to severe fiber failure. Although higher mass impactors show longer impact duration, lower mass impactors develop greater damage on the CFRP, as seen by a greater reduction in specimen stiffness. Furthermore, the presence of ice is observed to have a minimal effect on the damage behavior of composites. But ice layer assists to reduce the amplitude of initial load drop by the low mass impactor and as such, less permanent displacement is identified in the CFRP specimens than both room temperature and low-temperature conditions. This study explores the understanding of the dynamic behavior of composites under low-temperature icy conditions.

scholarly journals Palliatives for Low Velocity Impact Damage in Composite Laminates

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Mubarak Ali ◽  
S. C. Joshi ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Laminated Composites ◽  
Low Velocity Impact ◽  
Normal Operation ◽  
Fibre Reinforcement ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
The Impact

Fibre reinforced polymer laminated composites are susceptible to impact damage during manufacture, normal operation, maintenance, and/or other stages of their life cycle. Initiation and growth of such damage lead to dramatic loss in the structural integrity and strength of laminates. This damage is generally difficult to detect and repair. This makes it important to find a preventive solution. There has been abundance of research dealing with the impact damage evolution of composite laminates and methods to mitigate and alleviate the damage initiation and growth. This article presents a comprehensive review of different strategies dealing with development of new composite materials investigated by several research groups that can be used to mitigate the low velocity impact damage in laminated composites. Hybrid composites, composites with tough thermoplastic resins, modified matrices, surface modification of fibres, translaminar reinforcements, and interlaminar modifications such as interleaving, short fibre reinforcement, and particle based interlayer are discussed in this article. A critical evaluation of various techniques capable of enhancing impact performance of laminated composites and future directions in this research field are presented in this article.

scholarly journals Simulation of Low Velocity Impact on Composite Hemispherical Shell

2014 ◽  
Vol 564 ◽  
pp. 406-411
Author(s):  
Parnia Zakikhani ◽  
R. Zahari ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Finite Element ◽  
Energy Absorption ◽  
Experimental Testing ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Element Analysis ◽  
Velocity Impact ◽  
Hemispherical Shell ◽  
The Impact

Impact simulation with finite element analysis is an appropriate manner to reduce the cost and time taken to carry out an experimental testing on a component. In this study, the impact behavior of the composite hemispherical shell induced by low velocity impact is simulated in ABAQUS software with finite element method. To predict the responses of Kevlar fabric/polyester, glass fabric/polyester and carbon fabric/polyester in the form of a hemisphere, once as one layer and then as a three-layered composite under applied force by an anvil. The sequences of layers are changed, to investigate and compare the occurred alternations in the amount of energy absorption, impact force and specific energy absorption (SEA). The comparison of results showed that the highest and the lowest quantity of energy absorption and SEA belong to Carbon/Glass/Kevlar (CGK) and Kevlar/Carbon/Glass (KCG) respectively.

scholarly journals Analysis of Impact Behaviour of Sisal-Epoxy Composites under Low Velocity Regime

2021 ◽  
Vol 31 (1) ◽  
pp. 57-63
Author(s):  
Vishwas Mahesh ◽  
Ashutosh Nilabh ◽  
Sharnappa Joladarashi ◽  
Satyabodh M. Kulkarni
Keyword(s):  
Impact Velocity ◽  
Epoxy Composite ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
Damage Initiation ◽  
Structural Applications ◽  
Laminate Thickness ◽  
The Impact

The present study concentrates on development of conceptual proof for sisal reinforced polymer matrix composite for structural applications subjected to low velocity impact using a finite element (FE) approach. The proposed sisal-epoxy composite of various thicknesses of 3.2 mm, 4 mm and 4.8 mm is subjected to different impact velocities of 1 m/s, 2 m/s and 3 m/s ranging in the low velocity impact regime to study the energy absorbed and damage mitigation behaviour of the proposed composite. The consequence of velocity of impact and thickness of laminate on the sisal epoxy composite’s impact behaviour is assessed statistically using Taguchi’s experimental design. Outcome of the present study discloses that the energy absorption increases with increased impact velocity and laminate thickness. However, the statistical study shows that impact velocity is predominant factor affecting the impact response of sisal epoxy composite laminate compared to laminate thickness. The role of matrix and fiber in damage initiation is studied using Hashin criteria and it is found that matrix failure is predominant over the fiber failure.

Low-velocity impact behavior of composites reinforced with weft-knitted spacer glass fabrics

2018 ◽  
Vol 49 (4) ◽  
pp. 465-483 ◽  
Author(s):  
Hadi Dabiryan ◽  
Fatemeh Hasanalizade ◽  
Mojtaba Sadighi
Keyword(s):  
Structural Parameters ◽  
High Energy ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Reinforced Composites ◽  
Low Velocity ◽  
Velocity Impact ◽  
Proposed Model ◽  
Spacer Fabrics ◽  
The Impact

Structural parameters of fabrics influence the mechanical behaviour of fabric-reinforced composites. Weft-knitted spacer fabrics have high energy absorption capacity. In this paper, low-velocity impact behavior of composites reinforced with weft-knitted spacer fabrics has been studied using energy-balance method. The effect of fabric geometry on the impact behavior of composites was investigated. A theoretical model was generated to predict the energy dissipated through the impact, considering the structural parameters of fabrics as reinforcement of composites. For this purpose, dissipated energies due to contact, membrane and bending deformation of fabrics, and buckling deformation of spacer yarns were considered. In order to evaluate the proposed model, weft-knitted spacer fabrics with two types of spacer yarn's orientation were used as reinforcement of composites. Low-velocity impact examinations were performed using the drop hammer testing machine. The results showed that the model has about 12 and 13% error in prediction of dissipated energies of different samples. Comparison between theoretical and experimental results confirms that the proposed model is capable to predict the impact behavior of weft-knitted spacer fabric-reinforced composites.

Sign in / Sign up

Export Citation Format

Share Document