Exhaust Energy Recovery for Control of a Homogeneous Charge Compression Ignition Engine

2000 ◽  
Author(s):  
Joel Martinez-Frias ◽  
Salvador M. Aceves ◽  
Daniel Flowers ◽  
J. Ray Smith ◽  
Robert Dibble
Keyword(s):  
High Efficiency ◽  
Thermal Control ◽  
Operating Conditions ◽  
Cylinder Pressure ◽  
Detailed Chemical Kinetics ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Hcci Engine ◽  
Peak Cylinder Pressure ◽  
Wide Range

Abstract This work investigates a purely thermal control system for HCCI engines, where thermal energy from exhaust gas recirculation (EGR) and compression work in the supercharger are either recycled or rejected as needed. HCCI engine operation is analyzed with a detailed chemical kinetics code, HCT (Hydrodynamics, Chemistry and Transport), which has been extensively modified for application to engines. HCT is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of torque for a constant engine speed (1800 rpm). For zero torque (idle), the optimizer determines operating conditions that result in minimum fuel consumption. The optimizer is also used for determining the maximum torque that can be obtained within the operating restrictions of NOx and peak cylinder pressure. The results show that a thermally controlled HCCI engine can successfully operate over a wide range of conditions at high efficiency and low emissions.

Thermal Charge Conditioning for Optimal HCCI Engine Operation

2002 ◽  
Vol 124 (1) ◽  
pp. 67-75 ◽  
Author(s):  
Joel Martinez-Frias ◽  
Salvador M. Aceves ◽  
Daniel Flowers ◽  
J. Ray Smith ◽  
Robert Dibble
Keyword(s):  
High Efficiency ◽  
Thermal Control ◽  
Operating Conditions ◽  
Cylinder Pressure ◽  
Detailed Chemical Kinetics ◽  
Engine Operation ◽  
Hcci Engine ◽  
Peak Cylinder Pressure ◽  
Wide Range ◽  
Gas Recirculation

This work investigates a purely thermal control system for HCCI engines, where thermal energy from exhaust gas recirculation (EGR) and compression work in the supercharger are either recycled or rejected as needed. HCCI engine operation is analyzed with a detailed chemical kinetics code, HCT (Hydrodynamics, Chemistry and Transport), which has been extensively modified for application to engines. HCT is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of torque for a constant engine speed (1800 rpm). For zero torque (idle), the optimizer determines operating conditions that result in minimum fuel consumption. The optimizer is also used for determining the maximum torque that can be obtained within the operating restrictions of NOx and peak cylinder pressure. The results show that a thermally controlled HCCI engine can successfully operate over a wide range of conditions at high efficiency and low emissions.

Thermal Management for 6-Cylinder HCCI Engine: Low Cost, High Efficiency, Ultra-Low NOx Power Generation

2004 ◽  
Author(s):  
Joel Martinez-Frias ◽  
Daniel Flowers ◽  
Salvador M. Aceves ◽  
Francisco Espinos-Loza ◽  
Robert Dibble
Keyword(s):  
Thermal Efficiency ◽  
High Efficiency ◽  
Thermal Control ◽  
Operating Conditions ◽  
Simulation Code ◽  
Engine Operation ◽  
Brake Thermal Efficiency ◽  
Hcci Engine ◽  
Cycle Simulation ◽  
Wide Range

This paper investigates a purely thermal control system for a 6-cylinder HCCI engine. Thermal energy from exhaust gas and from compression is used to condition the charge for the desired engine output. HCCI engine operation is analyzed with a detailed chemical kinetics based engine cycle simulation code. This cycle simulation code is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx, and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of brake power for a constant engine speed (1800 rpm). It has been determined that a thermally controlled HCCI engine can successfully operate at high efficiency and low emissions over a wide range of conditions from idle to full load. The results show that a 42% brake thermal efficiency can be reached while the NOx emissions are kept under 2 parts per million. The analytical results shown here are expected to guide the ongoing experimental effort of converting a heavy-duty stationary engine to HCCI mode. The experimental work has the goal of meeting the very aggressive efficiency and emissions targets set by the California Energy Commission (CEC) Advanced Reciprocating Internal Combustion Engine (ARICE) Program.

S.I. Engine Operation on H2, CO, CH4 and Their Mixtures

2004 ◽  
Author(s):  
Hailin Li ◽  
Ghazi A. Karim ◽  
A. Sohrabi
Keyword(s):  
Operating Conditions ◽  
The Other ◽  
Oxidation Reactions ◽  
Detailed Chemical Kinetics ◽  
Engine Operation ◽  
Wide Range ◽  
Variable Compression Ratio Engine ◽  
Fuel Mixtures ◽  
Detailed Chemical ◽  
Good Agreement

Experimental data are presented of the knock and combustion characteristics of a wide range of fuel mixtures of CO, H2 and CH4 while using a variable compression ratio engine. A predictive model was employed for predicting such characteristics where the oxidation reactions of mixtures of H2, CO, and CH4 were simulated using detailed chemical kinetics. Predicted results were validated against those determined experimentally and showed good agreement for a wide range of fuel compositions and operating conditions. However, it was noted that the predicted knock limited equivalence ratios for dry CO-air operation, in comparison to the other fuel applications, tended to display deviation from the experimentally established values. The reasons for this tendency are discussed and measures to permit the prediction of such a behavior are presented.

scholarly journals Octane Index Applicability over the Pressure-Temperature Domain

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 607
Author(s):  
Tommy R. Powell ◽  
James P. Szybist ◽  
Flavio Dal Forno Chuahy ◽  
Scott J. Curran ◽  
John Mengwasser ◽  
...  
Keyword(s):  
High Efficiency ◽  
National Laboratory ◽  
Operating Conditions ◽  
Dominant Factor ◽  
Compression Ignition ◽  
Oak Ridge ◽  
Operating Modes ◽  
Wide Range ◽  
Thermodynamic Conditions ◽  
Si Engines

Modern boosted spark-ignition (SI) engines and emerging advanced compression ignition (ACI) engines operate under conditions that deviate substantially from the conditions of conventional autoignition metrics, namely the research and motor octane numbers (RON and MON). The octane index (OI) is an emerging autoignition metric based on RON and MON which was developed to better describe fuel knock resistance over a broader range of engine conditions. Prior research at Oak Ridge National Laboratory (ORNL) identified that OI performs reasonably well under stoichiometric boosted conditions, but inconsistencies exist in the ability of OI to predict autoignition behavior under ACI strategies. Instead, the autoignition behavior under ACI operation was found to correlate more closely to fuel composition, suggesting fuel chemistry differences that are insensitive to the conditions of the RON and MON tests may become the dominant factor under these high efficiency operating conditions. This investigation builds on earlier work to study autoignition behavior over six pressure-temperature (PT) trajectories that correspond to a wide range of operating conditions, including boosted SI operation, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). A total of 12 different fuels were investigated, including the Co-Optima core fuels and five fuels that represent refinery-relevant blending streams. It was found that, for the ACI operating modes investigated here, the low temperature reactions dominate reactivity, similar to boosted SI operating conditions because their PT trajectories lay close to the RON trajectory. Additionally, the OI metric was found to adequately predict autoignition resistance over the PT domain, for the ACI conditions investigated here, and for fuels from different chemical families. This finding is in contrast with the prior study using a different type of ACI operation with different thermodynamic conditions, specifically a significantly higher temperature at the start of compression, illustrating that fuel response depends highly on the ACI strategy being used.

Experimental Investigation of a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Jinlong Liu ◽  
Hemanth Kumar Bommisetty ◽  
Cosmin Emil Dumitrescu
Keyword(s):  
Natural Gas ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Compression Ignition ◽  
Heavy Duty ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Cycle Variation ◽  
Spark Timing ◽  
Ci Engines

Heavy-duty compression-ignition (CI) engines converted to natural gas (NG) operation can reduce the dependence on petroleum-based fuels and curtail greenhouse gas emissions. Such an engine was converted to premixed NG spark-ignition (SI) operation through the addition of a gas injector in the intake manifold and of a spark plug in place of the diesel injector. Engine performance and combustion characteristics were investigated at several lean-burn operating conditions that changed fuel composition, spark timing, equivalence ratio, and engine speed. While the engine operation was stable, the reentrant bowl-in-piston (a characteristic of a CI engine) influenced the combustion event such as producing a significant late combustion, particularly for advanced spark timing. This was due to an important fraction of the fuel burning late in the squish region, which affected the end of combustion, the combustion duration, and the cycle-to-cycle variation. However, the lower cycle-to-cycle variation, stable combustion event, and the lack of knocking suggest a successful conversion of conventional diesel engines to NG SI operation using the approach described here.

scholarly journals Development of the PGT 25 High Efficiency Gas Turbine: Part 2 — Aerodynamic Design and Performance

1984 ◽  
Author(s):  
E. Benvenuti ◽  
B. Innocenti ◽  
R. Modi
Keyword(s):  
Gas Turbine ◽  
High Efficiency ◽  
Performance Testing ◽  
Operating Conditions ◽  
Aerodynamic Design ◽  
Direct Drive ◽  
Gas Generator ◽  
Full Load ◽  
Wide Range ◽  
Overall Performance

This paper outlines parameter selection criteria and major procedures used in the PGT 25 gas turbine power spool aerodynamic design; significant results of the shop full-load tests are also illustrated with reference to both overall performance and internal flow-field measurements. A major aero-design objective was established as that of achieving the highest overall performance levels possible with the matching to latest generation aero-derivative gas generators; therefore, high efficiencies were set as a target both for the design point and for a wide range of operating conditions, to optimize the turbine’s uses in mechanical drive applications. Furthermore, the design was developed to reach the performance targets in conjunction with the availability of a nominal shaft speed optimized for the direct drive of pipeline booster centrifugal compressors. The results of the full-load performance testing of the first unit, equipped with a General Electric LM 2500/30 gas generator, showed full attainment of the design objectives; a maximum overall thermal efficiency exceeding 37% at nominal rating and a wide operating flexibility with regard to both efficiency and power were demonstrated.

Mechanical Design and Testing of a 2.5 MW sCO2 Compressor Loop

2021 ◽  
Author(s):  
Stefan D. Cich ◽  
J. Jeffrey Moore ◽  
Chris Kulhanek ◽  
Meera Day Towler ◽  
Jason Mortzheim
Keyword(s):  
High Efficiency ◽  
Mechanical Design ◽  
Guide Vane ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Inlet Temperature ◽  
Design Changes ◽  
Wide Range ◽  
Inlet Conditions ◽  
Design And Testing

Abstract An enabling technology for a successful deployment of the sCO2 close-loop recompression Brayton cycle is the development of a compressor that can maintain high efficiency for a wide range of inlet conditions due to large variation in properties of CO2 operating near its dome. One solution is to develop an internal actuated variable Inlet Guide Vane (IGV) system that can maintain high efficiency in the main and re-compressor with varying inlet temperature. A compressor for this system has recently been manufactured and tested at various operating conditions to determine its compression efficiency. This compressor was developed with funding from the US DOE Apollo program and industry partners. This paper will focus on the design and testing of the main compressor operating near the CO2 dome. It will look at design challenges that went into some of the decisions for rotor and case construction and how that can affect the mechanical and aerodynamic performance of the compressor. This paper will also go into results from testing at the various operating conditions and how the change in density of CO2 affected rotordynamics and overall performance of the machine. Results will be compared to expected performance and how design changes were implanted to properly counter challenges during testing.

Numerical study on combustion characteristics of six-stroke-cycle gasoline compression ignition engine with continuously variable valve duration valve technology

2019 ◽  
Vol 22 (1) ◽  
pp. 165-183 ◽  
Author(s):  
Oudumbar Rajput ◽  
Youngchul Ra ◽  
Kyoung-Pyo Ha ◽  
You-Sang Son
Keyword(s):  
Numerical Study ◽  
Power Stroke ◽  
Compression Ignition ◽  
Ignition Timing ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Wide Range ◽  
Negative Valve Overlap ◽  
Variable Valve ◽  
Valve Overlap

Engine performance and emissions of a six-stroke gasoline compression ignition engine with a wide range of continuously variable valve duration control were numerically investigated at low engine load conditions. For the simulations, an in-house three-dimensional computational fluid dynamics code with high-fidelity physical sub-models was used, and the combustion and emission kinetics were computed using a reduced kinetics mechanism for a 14-component gasoline surrogate fuel. Variation of valve timing and duration was considered under both positive valve overlap and negative valve overlap including the rebreathing of intake valves via continuously variable valve duration control. Close attention was paid to understand the effects of two additional strokes of the engine cycle on the thermal and chemical conditions of charge mixtures that alter ignition, combustion and energy recovery processes. Double injections were found to be necessary to effectively utilize the additional two strokes for the combustion of overly mixed lean charge mixtures during the second power stroke. It was found that combustion phasing in both power strokes is effectively controlled by the intake valve closure timing. Engine operation under negative valve overlap condition tends to advance the ignition timing of the first power stroke but has minimal effect on the ignition timing of second power stroke. Re-breathing was found to be an effective way to control the ignition timing in second power stroke at a slight expense of the combustion efficiency. The operation of a six-stroke gasoline compression ignition engine could be successfully simulated. In addition, the operability range of the six-stroke gasoline compression ignition engine could be substantially extended by employing the continuously variable valve duration technique.

Prediction of Peak Cylinder Pressure Variations Over Varying Inlet Air Condition of Compression-Ignition Engine

2005 ◽  
Author(s):  
Gong Chen
Keyword(s):  
Air Temperature ◽  
Compression Ratio ◽  
Design Parameters ◽  
Compression Ignition ◽  
Cylinder Pressure ◽  
Compression Ignition Engine ◽  
Engine Design ◽  
Peak Cylinder Pressure ◽  
Temperature And Pressure ◽  
Cylinder Compression

Peak cylinder pressure of a compression-ignition engine can be affected by engine inlet air condition such as its temperature and pressure. The variation of peak cylinder pressure due to varying inlet air temperature and pressure is analytically studied in this paper. An analytical model is developed and thus the variations of peak cylinder pressure can be predicted along with inlet air temperature or pressure varying. It is indicated that cylinder compression ratio (CR) and intake air boost ratio (pm0/pi0) play significant roles in affecting the variation of peak cylinder pressure over inlet air temperature and pressure, and the pressure variation is proportional to CRk and pm0/pi0. The predicted results are compared to those from engine experiments, and show a close agreement. The prediction also includes the investigation of the variation in peak cylinder pressure due to varying the cylinder TDC volume. Results from the analytical studies are presented and show that the change in pmax versus a change in the volume is also affected by compression ratio. This indicates that for a certain change in the clearance volume, a higher compression-ratio configuration would produce a greater change in pmax than a lower compression-ratio would with the rest of the engine design parameters remaining unchanged.

Modeling the Effects of Variable Intake Valve Timing on Diesel HCCI Combustion at Varying Load, Speed, and Boost Pressures

2008 ◽  
Vol 130 (5) ◽  
Author(s):  
C. L. Genzale ◽  
S.-C. Kong ◽  
R. D. Reitz
Keyword(s):  
Operating Conditions ◽  
Effective Control ◽  
Intake Valve ◽  
Valve Timing ◽  
Detailed Chemical Kinetics ◽  
Hcci Combustion ◽  
Wide Range ◽  
Particulate Matter Emissions ◽  
Charge Mixture ◽  
Ignition And Combustion

Homogeneous charge compression ignition (HCCI) operated engines have the potential to provide the efficiency of a typical diesel engine, with very low NOx and particulate matter emissions. However, one of the main challenges with this type of operation in diesel engines is that it can be difficult to control the combustion phasing, especially at high loads. In diesel HCCI engines, the premixed fuel-air charge tends to ignite well before top dead center, especially as load is increased, and a method of delaying the ignition is necessary. The development of variable valve timing (VVT) technology may offer an important advantage in the ability to control diesel HCCI combustion. VVT technology can allow for late intake valve closure (IVC) times, effectively changing the compression ratio of the engine. This can decrease compression temperatures and delay ignition, thus allowing the possibility to employ HCCI operation at higher loads. Furthermore, fully flexible valve trains may offer the potential for dynamic combustion phasing control over a wide range of operating conditions. A multidimensional computational fluid dynamics model is used to evaluate combustion event phasing as both IVC times and operating conditions are varied. The use of detailed chemical kinetics, based on a reduced n-heptane mechanism, provides ignition and combustion predictions and includes low-temperature chemistry. The use of IVC delay is demonstrated to offer effective control of diesel HCCI combustion phasing over varying loads, engine speeds, and boost pressures. Additionally, as fueling levels are increased, charge mixture properties are observed to have a significant effect on combustion phasing. While increased fueling rates are generally seen to advance combustion phasing, the reduction of specific heat ratio in higher equivalence ratio mixtures can also cause noticeably slower temperature rise rates, affecting ignition timing and combustion phasing. Variable intake valve timing may offer a promising and flexible control mechanism for the phasing of diesel HCCI combustion. Over a large range of boost pressures, loads, and engine speeds, the use of delayed IVC is shown to sufficiently delay combustion in order to obtain optimal combustion phasing and increased work output, thus pointing towards the possibility of expanding the current HCCI operating range into higher load points.

Sign in / Sign up

Export Citation Format

Share Document