Thermal Charge Conditioning for Optimal HCCI Engine Operation

2002 ◽  
Vol 124 (1) ◽  
pp. 67-75 ◽  
Author(s):  
Joel Martinez-Frias ◽  
Salvador M. Aceves ◽  
Daniel Flowers ◽  
J. Ray Smith ◽  
Robert Dibble
Keyword(s):  
High Efficiency ◽  
Thermal Control ◽  
Operating Conditions ◽  
Cylinder Pressure ◽  
Detailed Chemical Kinetics ◽  
Engine Operation ◽  
Hcci Engine ◽  
Peak Cylinder Pressure ◽  
Wide Range ◽  
Gas Recirculation

This work investigates a purely thermal control system for HCCI engines, where thermal energy from exhaust gas recirculation (EGR) and compression work in the supercharger are either recycled or rejected as needed. HCCI engine operation is analyzed with a detailed chemical kinetics code, HCT (Hydrodynamics, Chemistry and Transport), which has been extensively modified for application to engines. HCT is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of torque for a constant engine speed (1800 rpm). For zero torque (idle), the optimizer determines operating conditions that result in minimum fuel consumption. The optimizer is also used for determining the maximum torque that can be obtained within the operating restrictions of NOx and peak cylinder pressure. The results show that a thermally controlled HCCI engine can successfully operate over a wide range of conditions at high efficiency and low emissions.

Exhaust Energy Recovery for Control of a Homogeneous Charge Compression Ignition Engine

2000 ◽  
Author(s):  
Joel Martinez-Frias ◽  
Salvador M. Aceves ◽  
Daniel Flowers ◽  
J. Ray Smith ◽  
Robert Dibble
Keyword(s):  
High Efficiency ◽  
Thermal Control ◽  
Operating Conditions ◽  
Cylinder Pressure ◽  
Detailed Chemical Kinetics ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Hcci Engine ◽  
Peak Cylinder Pressure ◽  
Wide Range

Abstract This work investigates a purely thermal control system for HCCI engines, where thermal energy from exhaust gas recirculation (EGR) and compression work in the supercharger are either recycled or rejected as needed. HCCI engine operation is analyzed with a detailed chemical kinetics code, HCT (Hydrodynamics, Chemistry and Transport), which has been extensively modified for application to engines. HCT is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of torque for a constant engine speed (1800 rpm). For zero torque (idle), the optimizer determines operating conditions that result in minimum fuel consumption. The optimizer is also used for determining the maximum torque that can be obtained within the operating restrictions of NOx and peak cylinder pressure. The results show that a thermally controlled HCCI engine can successfully operate over a wide range of conditions at high efficiency and low emissions.

Thermal Management for 6-Cylinder HCCI Engine: Low Cost, High Efficiency, Ultra-Low NOx Power Generation

2004 ◽  
Author(s):  
Joel Martinez-Frias ◽  
Daniel Flowers ◽  
Salvador M. Aceves ◽  
Francisco Espinos-Loza ◽  
Robert Dibble
Keyword(s):  
Thermal Efficiency ◽  
High Efficiency ◽  
Thermal Control ◽  
Operating Conditions ◽  
Simulation Code ◽  
Engine Operation ◽  
Brake Thermal Efficiency ◽  
Hcci Engine ◽  
Cycle Simulation ◽  
Wide Range

This paper investigates a purely thermal control system for a 6-cylinder HCCI engine. Thermal energy from exhaust gas and from compression is used to condition the charge for the desired engine output. HCCI engine operation is analyzed with a detailed chemical kinetics based engine cycle simulation code. This cycle simulation code is linked to an optimizer that determines the operating conditions that result in maximum brake thermal efficiency, while meeting the restrictions of low NOx, and peak cylinder pressure. The results show the values of the operating conditions that yield optimum efficiency as a function of brake power for a constant engine speed (1800 rpm). It has been determined that a thermally controlled HCCI engine can successfully operate at high efficiency and low emissions over a wide range of conditions from idle to full load. The results show that a 42% brake thermal efficiency can be reached while the NOx emissions are kept under 2 parts per million. The analytical results shown here are expected to guide the ongoing experimental effort of converting a heavy-duty stationary engine to HCCI mode. The experimental work has the goal of meeting the very aggressive efficiency and emissions targets set by the California Energy Commission (CEC) Advanced Reciprocating Internal Combustion Engine (ARICE) Program.

S.I. Engine Operation on H2, CO, CH4 and Their Mixtures

2004 ◽  
Author(s):  
Hailin Li ◽  
Ghazi A. Karim ◽  
A. Sohrabi
Keyword(s):  
Operating Conditions ◽  
The Other ◽  
Oxidation Reactions ◽  
Detailed Chemical Kinetics ◽  
Engine Operation ◽  
Wide Range ◽  
Variable Compression Ratio Engine ◽  
Fuel Mixtures ◽  
Detailed Chemical ◽  
Good Agreement

Experimental data are presented of the knock and combustion characteristics of a wide range of fuel mixtures of CO, H2 and CH4 while using a variable compression ratio engine. A predictive model was employed for predicting such characteristics where the oxidation reactions of mixtures of H2, CO, and CH4 were simulated using detailed chemical kinetics. Predicted results were validated against those determined experimentally and showed good agreement for a wide range of fuel compositions and operating conditions. However, it was noted that the predicted knock limited equivalence ratios for dry CO-air operation, in comparison to the other fuel applications, tended to display deviation from the experimentally established values. The reasons for this tendency are discussed and measures to permit the prediction of such a behavior are presented.

scholarly journals Octane Index Applicability over the Pressure-Temperature Domain

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 607
Author(s):  
Tommy R. Powell ◽  
James P. Szybist ◽  
Flavio Dal Forno Chuahy ◽  
Scott J. Curran ◽  
John Mengwasser ◽  
...  
Keyword(s):  
High Efficiency ◽  
National Laboratory ◽  
Operating Conditions ◽  
Dominant Factor ◽  
Compression Ignition ◽  
Oak Ridge ◽  
Operating Modes ◽  
Wide Range ◽  
Thermodynamic Conditions ◽  
Si Engines

Modern boosted spark-ignition (SI) engines and emerging advanced compression ignition (ACI) engines operate under conditions that deviate substantially from the conditions of conventional autoignition metrics, namely the research and motor octane numbers (RON and MON). The octane index (OI) is an emerging autoignition metric based on RON and MON which was developed to better describe fuel knock resistance over a broader range of engine conditions. Prior research at Oak Ridge National Laboratory (ORNL) identified that OI performs reasonably well under stoichiometric boosted conditions, but inconsistencies exist in the ability of OI to predict autoignition behavior under ACI strategies. Instead, the autoignition behavior under ACI operation was found to correlate more closely to fuel composition, suggesting fuel chemistry differences that are insensitive to the conditions of the RON and MON tests may become the dominant factor under these high efficiency operating conditions. This investigation builds on earlier work to study autoignition behavior over six pressure-temperature (PT) trajectories that correspond to a wide range of operating conditions, including boosted SI operation, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). A total of 12 different fuels were investigated, including the Co-Optima core fuels and five fuels that represent refinery-relevant blending streams. It was found that, for the ACI operating modes investigated here, the low temperature reactions dominate reactivity, similar to boosted SI operating conditions because their PT trajectories lay close to the RON trajectory. Additionally, the OI metric was found to adequately predict autoignition resistance over the PT domain, for the ACI conditions investigated here, and for fuels from different chemical families. This finding is in contrast with the prior study using a different type of ACI operation with different thermodynamic conditions, specifically a significantly higher temperature at the start of compression, illustrating that fuel response depends highly on the ACI strategy being used.

scholarly journals Development of the PGT 25 High Efficiency Gas Turbine: Part 2 — Aerodynamic Design and Performance

1984 ◽  
Author(s):  
E. Benvenuti ◽  
B. Innocenti ◽  
R. Modi
Keyword(s):  
Gas Turbine ◽  
High Efficiency ◽  
Performance Testing ◽  
Operating Conditions ◽  
Aerodynamic Design ◽  
Direct Drive ◽  
Gas Generator ◽  
Full Load ◽  
Wide Range ◽  
Overall Performance

This paper outlines parameter selection criteria and major procedures used in the PGT 25 gas turbine power spool aerodynamic design; significant results of the shop full-load tests are also illustrated with reference to both overall performance and internal flow-field measurements. A major aero-design objective was established as that of achieving the highest overall performance levels possible with the matching to latest generation aero-derivative gas generators; therefore, high efficiencies were set as a target both for the design point and for a wide range of operating conditions, to optimize the turbine’s uses in mechanical drive applications. Furthermore, the design was developed to reach the performance targets in conjunction with the availability of a nominal shaft speed optimized for the direct drive of pipeline booster centrifugal compressors. The results of the full-load performance testing of the first unit, equipped with a General Electric LM 2500/30 gas generator, showed full attainment of the design objectives; a maximum overall thermal efficiency exceeding 37% at nominal rating and a wide operating flexibility with regard to both efficiency and power were demonstrated.

Mechanical Design and Testing of a 2.5 MW sCO2 Compressor Loop

2021 ◽  
Author(s):  
Stefan D. Cich ◽  
J. Jeffrey Moore ◽  
Chris Kulhanek ◽  
Meera Day Towler ◽  
Jason Mortzheim
Keyword(s):  
High Efficiency ◽  
Mechanical Design ◽  
Guide Vane ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Inlet Temperature ◽  
Design Changes ◽  
Wide Range ◽  
Inlet Conditions ◽  
Design And Testing

Abstract An enabling technology for a successful deployment of the sCO2 close-loop recompression Brayton cycle is the development of a compressor that can maintain high efficiency for a wide range of inlet conditions due to large variation in properties of CO2 operating near its dome. One solution is to develop an internal actuated variable Inlet Guide Vane (IGV) system that can maintain high efficiency in the main and re-compressor with varying inlet temperature. A compressor for this system has recently been manufactured and tested at various operating conditions to determine its compression efficiency. This compressor was developed with funding from the US DOE Apollo program and industry partners. This paper will focus on the design and testing of the main compressor operating near the CO2 dome. It will look at design challenges that went into some of the decisions for rotor and case construction and how that can affect the mechanical and aerodynamic performance of the compressor. This paper will also go into results from testing at the various operating conditions and how the change in density of CO2 affected rotordynamics and overall performance of the machine. Results will be compared to expected performance and how design changes were implanted to properly counter challenges during testing.

scholarly journals Cyclic NO2:NOx ratio from a diesel engine undergoing transient load steps

2019 ◽  
Vol 22 (1) ◽  
pp. 284-294 ◽  
Author(s):  
FCP Leach ◽  
MH Davy ◽  
MS Peckham
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Exhaust Gas Recirculation ◽  
Operating Conditions ◽  
Formation Mechanisms ◽  
Exhaust Gas ◽  
Work Cycle ◽  
Wide Range ◽  
Gas Recirculation ◽  
Aftertreatment Systems

As the control of real driving emissions continues to increase in importance, the importance of understanding emission formation mechanisms during engine transients similarly increases. Knowledge of the NO2/NOx ratio emitted from a diesel engine is necessary, particularly for ensuring optimum performance of NOx aftertreatment systems. In this work, cycle-to-cycle NO and NOx emissions have been measured using a Cambustion CLD500, and the cyclic NO2/NOx ratio calculated as a high-speed light-duty diesel engine undergoes transient steps in load, while all other engine parameters are held constant across a wide range of operating conditions with and without exhaust gas recirculation. The results show that changes in NO and NOx, and hence NO2/NOx ratio, are instantaneous upon a step change in engine load. NO2/NOx ratios have been observed in line with previously reported results, although at the lightest engine loads and at high levels of exhaust gas recirculation, higher levels of NO2 than have been previously reported in the literature are observed.

Modeling the Effects of Variable Intake Valve Timing on Diesel HCCI Combustion at Varying Load, Speed, and Boost Pressures

2008 ◽  
Vol 130 (5) ◽  
Author(s):  
C. L. Genzale ◽  
S.-C. Kong ◽  
R. D. Reitz
Keyword(s):  
Operating Conditions ◽  
Effective Control ◽  
Intake Valve ◽  
Valve Timing ◽  
Detailed Chemical Kinetics ◽  
Hcci Combustion ◽  
Wide Range ◽  
Particulate Matter Emissions ◽  
Charge Mixture ◽  
Ignition And Combustion

Homogeneous charge compression ignition (HCCI) operated engines have the potential to provide the efficiency of a typical diesel engine, with very low NOx and particulate matter emissions. However, one of the main challenges with this type of operation in diesel engines is that it can be difficult to control the combustion phasing, especially at high loads. In diesel HCCI engines, the premixed fuel-air charge tends to ignite well before top dead center, especially as load is increased, and a method of delaying the ignition is necessary. The development of variable valve timing (VVT) technology may offer an important advantage in the ability to control diesel HCCI combustion. VVT technology can allow for late intake valve closure (IVC) times, effectively changing the compression ratio of the engine. This can decrease compression temperatures and delay ignition, thus allowing the possibility to employ HCCI operation at higher loads. Furthermore, fully flexible valve trains may offer the potential for dynamic combustion phasing control over a wide range of operating conditions. A multidimensional computational fluid dynamics model is used to evaluate combustion event phasing as both IVC times and operating conditions are varied. The use of detailed chemical kinetics, based on a reduced n-heptane mechanism, provides ignition and combustion predictions and includes low-temperature chemistry. The use of IVC delay is demonstrated to offer effective control of diesel HCCI combustion phasing over varying loads, engine speeds, and boost pressures. Additionally, as fueling levels are increased, charge mixture properties are observed to have a significant effect on combustion phasing. While increased fueling rates are generally seen to advance combustion phasing, the reduction of specific heat ratio in higher equivalence ratio mixtures can also cause noticeably slower temperature rise rates, affecting ignition timing and combustion phasing. Variable intake valve timing may offer a promising and flexible control mechanism for the phasing of diesel HCCI combustion. Over a large range of boost pressures, loads, and engine speeds, the use of delayed IVC is shown to sufficiently delay combustion in order to obtain optimal combustion phasing and increased work output, thus pointing towards the possibility of expanding the current HCCI operating range into higher load points.

Computational Analysis of an Early Direct Injected HCCI Engine with Turbocharger Using Bio Ethanol and Diesel Blends

2015 ◽  
Vol 812 ◽  
pp. 70-78
Author(s):  
S. Natarajan ◽  
A.U. Meeanakshi Sundareswaran ◽  
S. Arun Kumar ◽  
N.V. Mahalakshmi
Keyword(s):  
Chemical Kinetics ◽  
Computational Analysis ◽  
Reaction Path ◽  
Chemical Species ◽  
Operating Conditions ◽  
Injection Time ◽  
Engine Operation ◽  
Hcci Engine ◽  
Hcci Combustion ◽  
Auto Ignition

In this paper the work deals with the computational analysis of early direct injected HCCI engine with turbocharger using the CHEMKIN-PRO software. The computational analysis was carried out in the base of auto ignition chemistry by means of reduced chemical kinetics. For this study the neat diesel and Bio ethanol diesel blend (E20) were used as fuel. The inlet pressure was increased to 1.2 bar to simulate the turbocharged engine operation. The injection time was advanced to 18° before top dead centre (BTDC) i.e., 5° BTDC than normal injection time of 23° BTDC. The equivalence ratio was kept at 0.6 (ɸ=0.6) and the combustion, emission characteristics and chemical kinetics of the combustion reaction were studied. Since pressure and temperature profiles plays a very important role in reaction path at certain operating conditions, an attempt had been made here to present a complete reaction path investigation on the formation/destruction of chemical species at peak temperature and pressure conditions. The result showed that main draw backs of HCCI combustion like higher levels of unburned hydrocarbon emissions and carbon monoxide emissions are reduced in the turbocharged operation of the HCCI engine when compared to normal HCCI engine operation without turbocharger.

The Dimension Match and Parameters Setting of the Hydraulic Motor for the Hydraulic-Electromagnetic Energy-Regenerative Shock Absorber

2017 ◽  
Author(s):  
Jia Mi ◽  
Lin Xu ◽  
Sijing Guo ◽  
Mohamed A. A. Abdelkareem ◽  
Lingshuai Meng ◽  
...  
Keyword(s):  
Energy Conversion ◽  
Shock Absorber ◽  
High Efficiency ◽  
Mechanical Energy ◽  
Hydraulic Cylinder ◽  
Electromagnetic Energy ◽  
Operating Conditions ◽  
Hydraulic Motor ◽  
Wide Range ◽  
Regenerative Shock Absorber

Hydraulic-electromagnetic Energy-regenerative Shock Absorber (HESA) has been proposed recently, with the purpose of mitigating vibration in vehicle suspensions and recovering vibration energy traditionally dissipated by oil dampers simultaneously. The HESA is composed of hydraulic cylinder, check valves, accumulators, hydraulic motor, generator, pipelines and so on. The energy conversion from hydraulic energy to mechanical energy mainly depends on the hydraulic motor between two accumulators. Hence, the dimension match and parameter settings of hydraulic motor for the HESA are extremely important for efficiency of the whole system. This paper studies the methods and steps for dimension matching and parameter settings of the hydraulic motor in a case of a typical commercial vehicle. To evaluate suspension’s vibration characteristics, experiments on the target tour bus have been done. Simulations are conducted to investigate the effects of the hydraulic motor in different working conditions. The simulation results verify that the methods and steps adopted are accurate over a wide range of operating conditions and also show that appropriate matching and parameter settings of the hydraulic motor attached in the HESA can work with high efficiency and then effectively improving energy conversion efficiency for the whole system. Therefore, the theory of the matching progress can guide the future design of an HESA.

Sign in / Sign up

Export Citation Format

Share Document