Modeling and Simulation of Cross-Flow Induced Vibrations in Tube Bundles Using Bondgraph Approach

2006 ◽  
Author(s):  
M. Afzaal Malik ◽  
Badar Rashid ◽  
M. Anwar Khan ◽  
Khawaja Sajid Bashir ◽  
Shahab Khushnood
Keyword(s):  
Research Work ◽  
Cross Flow ◽  
Acoustic Resonance ◽  
Elastic Instability ◽  
Steam Generators ◽  
Two Phase ◽  
Considerable Research ◽  
Tube Bundles ◽  
Flow Induced Vibrations ◽  
Excitation Mechanisms

A considerable research has been carried out in the field of Cross-Flow Induced Vibrations (CFIV) in tube bundles of process exchangers and nuclear steam generators. Various excitation mechanisms such as vortex shedding, turbulent buffeting, fluid-elastic instability and acoustic resonance and other parameters like natural frequencies, damping, wear work rates at the loose tube supports and various geometric tube arrangements have been the focus in single and two-phase cross-flow. In the current research work, CFIV has been studied by using Bondgraph approach. The Bondgraph models have been subjected to simulation using the software (20-SIM). Results obtained have shown a strong usefulness of Bondgraph approach to complex CFIV systems.

Vibration of Tube Bundles Subjected to Two-Phase Cross-Flow

1985 ◽  
Vol 107 (4) ◽  
pp. 335-343 ◽  
Author(s):  
M. J. Pettigrew ◽  
J. H. Tromp ◽  
J. Mastorakos
Keyword(s):  
Heat Exchangers ◽  
Tube Bundle ◽  
Cross Flow ◽  
Elastic Instability ◽  
Steam Generators ◽  
Two Phase ◽  
Vibration Excitation ◽  
Mass Fluxes ◽  
Excitation Mechanisms ◽  
Shell And Tube

Two-phase cross-flow exists in many shell-and-tube heat exchangers such as condensers, reboilers and nuclear steam generators. Thus we are conducting a comprehensive program to study tube bundle vibrations subjected to two-phase cross-flow. This paper presents the results of experiments on a normal-triangular and a normal-square tube bundle, both of p/d = 1.47. The bundles were subjected to air-water mixtures to simulate realistic vapor qualities and mass fluxes. Vibration excitation mechanisms were deduced from vibration response measurements. Results on damping, hydrodynamic mass, fluid-elastic instability and random turbulence excitation in two-phase cross-flow are presented.

Design guidelines for fluid-elastic instability of tube bundles subjected to two-phase cross flow

2019 ◽  
Vol 20 (8) ◽  
pp. 577-589
Author(s):  
Ning Sun ◽  
Rui-jia Cheng ◽  
Ya-nan Zhang ◽  
Bao-qing Liu ◽  
Bengt Sunden
Keyword(s):  
Cross Flow ◽  
Design Guidelines ◽  
Elastic Instability ◽  
Two Phase ◽  
Tube Bundles

Experimental Investigation of Fluid-Elastic Vibration of Square Array Tube Bundle in Two Phase Flow

2019 ◽  
Author(s):  
Ryoichi Kawakami ◽  
Seinosuke Azuma ◽  
Toshifumi Nariai ◽  
Kazuo Hirota ◽  
Hideyuki Morita ◽  
...  
Keyword(s):  
Two Phase Flow ◽  
Tube Bundle ◽  
Flow Direction ◽  
Phase Flow ◽  
Elastic Instability ◽  
Steam Generators ◽  
Two Phase ◽  
Critical Flow Velocity ◽  
Tube Bundles ◽  
Square Array

Abstract The in-plane (in-flow) fluid-elastic instability (in-plane FEI) of triangular tube arrays caused tube-to-tube wear indications as observed in the U-bend regions of tube bundles of the San Onofre Unit-3 steam generators[1]. Several researches revealed that the in-plane FEI is likely to occur in a tightly packed triangular tube array under high velocity and low friction conditions, while it is not likely to occur in a square array tube bundle. In order to confirm the potential of steam-wise fluid-elastic instability of square arrays, the critical flow velocity in two-phase flow, (sulfur hexafluoride-ethanol) which simulates steam-water flow, was investigated. Two types of test rigs were prepared to confirm the effect of the tube diameter and tube pitch ratio on the critical velocity. In both rigs, vibration amplitudes were measured in both in-flow and out-of-flow directions in various flow conditions. In any case, in-flow fluid elastic instability was not detected. Based on the results of the tests, it is concluded that the flow interaction force is small for concern to occur the fluid-elastic instability in the in-flow direction of the square tube bundles of steam generators.

Modeling and Simulation of Cross-Flow Induced Vibration in a Multi-Span Tube Bundle

2004 ◽  
Author(s):  
Shahab Khushnood ◽  
Zaffar M. Khan ◽  
M. Afzaal Malik ◽  
Zafarullah Koreshi ◽  
Mahmood Anwar Khan
Keyword(s):  
Heat Exchanger ◽  
Tube Bundle ◽  
Cross Flow ◽  
Fatigue Cracking ◽  
Acoustic Resonance ◽  
Computer Code ◽  
Variable Geometry ◽  
Flow Induced Vibration ◽  
Two Phase ◽  
Tube Bundles

Flow-induced vibration in steam generator and heat exchanger tube bundles has been a source of major concern in nuclear and process industry. Tubes in a bundle are the most flexible components of the assembly. Flow induced vibration mechanisms, like fluid-elastic instability, vortex shedding, turbulence induced excitation and acoustic resonance results in failure due to mechanical wear, fretting and fatigue cracking. The general trend in heat exchanger design is towards larger exchangers with increased shell side velocities. Costly plant shutdowns have been the motivation for research in the area of cross-flow induced vibration in steam generators and process exchangers. The current paper focuses on the development of a computer code (FIVPAK) for the design (natural frequencies, variable geometry, tube pitch & pattern, mass damping parameter, reduced velocity, strouhal and damage numbers, added mass, wear work rates, void fraction for two-phase, turbulence and acoustic considerations etc.) of tube bundles with respect to cross flow-induced vibration. The code has been validated against Tubular Exchanger Manufacturers (TEMA), Flow-Induced Vibration code (FIV), and results on an actual variable geometry exchanger, specially manufactured to simulate real systems. The proposed code is expected to prove a useful tool in designing a tube bundle and to evaluate the performance of an existing system.

Vibration of Tube Bundles in Two-Phase Cross-Flow: Part 2—Fluid-Elastic Instability

1989 ◽  
Vol 111 (4) ◽  
pp. 478-487 ◽  
Author(s):  
M. J. Pettigrew ◽  
J. H. Tromp ◽  
C. E. Taylor ◽  
B. S. Kim
Keyword(s):  
Tube Bundle ◽  
Cross Flow ◽  
Design Guidelines ◽  
Experimental Program ◽  
Elastic Instability ◽  
Two Phase ◽  
Critical Flow Velocity ◽  
Flexible Tube ◽  
Elastic Instabilities ◽  
Tube Bundles

An extensive experimental program was carried out to study the vibration behavior of tube bundles subjected to two-phase cross-flow. Fluid-elastic instability is discussed in Part 2 of this series of three papers. Four tube bundle configurations were subjected to increasing flow up to the onset of fluid-elastic instability. The tests were done on bundles with all-flexible tubes and on bundles with one flexible tube surrounded by rigid tubes. Fluid-elastic instabilities have been observed for all tube bundles and all flow conditions. The critical flow velocity for fluid-elastic instability is significantly lower for the all-flexible tube bundles. The fluid-elastic instability behavior is different for intermittent flows than for continuous flow regimes such as bubbly or froth flows. For continuous flows, the observed instabilities satisfy the relationship V/fd = K(2πζm/ρd2)0.5 in which the minimum instability factor K was found to be around 4 for bundles of p/d = 1.47 and significantly less for p/d = 1.32. Design guidelines are recommended to avoid fluid-elastic instabilities in two-phase cross-flows.

Fluid-Elastic Instability of Normal Square Tube Bundles in Two-Phase Cross Flow

2010 ◽  
Author(s):  
Woo Gun Sim ◽  
Mi Yeon Park
Keyword(s):  
Heat Exchanger ◽  
Flow Velocity ◽  
Dynamic Instability ◽  
Cross Flow ◽  
Elastic Instability ◽  
Two Phase ◽  
Critical Flow Velocity ◽  
Tube Heat Exchanger ◽  
Tube Bundles ◽  
Square Array

Some knowledge on damping and fluid-elastic instability is necessary to avoid flow-induced-vibration problems in shell and tube heat exchanger such as steam generator. Fluid-elastic instability is the most important vibration excitation mechanism for heat exchanger tube bundles subjected to the cross flow. Experiments have been performed to investigate fluid-elastic instability of normal square tube bundles, subjected to two-phase cross flow. The test section consists of cantilevered flexible cylinder(s) and rigid cylinders of normal square array. From a practical design point of view, fluid-elastic instability may be expressed simply in terms of dimensionless flow velocity and dimensionless mass-damping parameter. For dynamic instability of cylinder rows, added mass, damping and critical flow velocity are evaluated. The Fluid-elastic instability coefficient is calculated and then compared to existing results given for tube bundles in normal square array.

Flow-Induced Vibrations in Two-Phase Flow

1991 ◽  
Vol 113 (2) ◽  
pp. 234-241 ◽  
Author(s):  
S. S. Chen
Keyword(s):  
Two Phase Flow ◽  
Cross Flow ◽  
Axial Flow ◽  
Circular Cylinders ◽  
Phase Flow ◽  
Two Phase ◽  
Flowing Fluid ◽  
Flow Induced Vibrations ◽  
Excitation Mechanisms ◽  
Quiescent Fluid

Two-phase flow exists in many shell-and-tube heat exchangers and power generation components. The flowing fluid is a source of energy that can induce small-amplitude subcritical oscillations and large-amplitude dynamic instabilities. In fact, many practical system components have experienced excessive flow-induced vibrations. This paper reviews the current understanding of vibration of circular cylinders in quiescent fluid, cross-flow, and axial flow, with emphasis on excitation mechanisms, mathematical models, and available experimental data. A unified theory is presented for cylinders oscillating under different flow conditions.

An Experimental Investigation of the Dynamics of a Loosely Supported Tube Array

2017 ◽  
Author(s):  
Amro Elhelaly ◽  
Marwan Hassan ◽  
Atef Mohany ◽  
Soha Moussa
Keyword(s):  
Experimental Investigation ◽  
Impact Force ◽  
Cross Flow ◽  
Open Loop ◽  
Diameter Ratio ◽  
Force Level ◽  
Steam Generators ◽  
Flow Induced Vibration ◽  
System Integrity ◽  
Tube Bundles

The integrity of tube bundles is very important especially when dealing with high-risk applications such as nuclear steam generators. A major issue to system integrity is the flow-induced vibration (FIV). FIV is manifested through several mechanisms including the most severe mechanism; fluidelastic instability (FEI). Tube vibration can be constrained by using tube supports. However, clearances between the tube and their support are required to allow for thermal expansion and for other manufacturing considerations. The clearance between tubes may allow frequent impact and friction between tube and support. This in turn may cause fatigue and wear at support and potential for catastrophic tube failure. This study aims to investigate the dynamics of loosely supported tube array subjected to cross-flow. The work is performed experimentally in an open-loop wind tunnel to address this issue. A loosely-supported single flexible tube in both triangle and square arrays subjected to cross-flow with a pitch-to-diameter ratio of 1.5 and 1.733, respectively were considered. The effect of the flow approach angle, as well as the support clearance on the tube response, are investigated. In addition, the parameters that affect tube wear such as impact force level are presented.

Sign in / Sign up

Export Citation Format

Share Document