Energy Saving Effect of Different Wall Structures Based on Intermittent Energy Use Characteristics in a Hot Summer and Cold Winter Zone

2016 ◽  
Author(s):  
Yanyan Zhu ◽  
Wei Li ◽  
Bin Zhou ◽  
David J. Kukulka
Keyword(s):  
Energy Use ◽  
Three Dimensional ◽  
Transfer Model ◽  
Cold Winter ◽  
Heating And Cooling ◽  
Living Space ◽  
Wall Structures ◽  
Insulation Thickness ◽  
Reduction Of Energy Consumption ◽  
Saving Effect

An analysis is performed for a typical residential living space with intermittent energy use in a hot summer and cold winter zone. Analysis performed in this study include a dynamic, three dimensional heat transfer model that examine the intermittent heating and cooling loads in a typical living space in Shanghai. Different wall structures (non-insulation structure, exterior insulation structure, or interior insulation structure) can have different influences on the energy efficiency in buildings. Results conclude that the interior insulation structure provides the largest reduction of energy consumption in buildings when compared to the other wall structures in a hot summer and cold winter zone. For the interior insulation structure in this study, the typical thermal insulation thickness is 0.03 m.

scholarly journals Assessment of thermal and electrical performance of BIPV façades using simplified simulations

2021 ◽  
Vol 2042 (1) ◽  
pp. 012081
Author(s):  
Romain Schindelholz ◽  
Mohammad Rahiminejad ◽  
Arnab Chatterjee ◽  
Dolaana Khovalyg
Keyword(s):  
Energy Use ◽  
Thermal Inertia ◽  
Visual Programming ◽  
Electrical Performance ◽  
Transfer Model ◽  
Complex Flow ◽  
Building Site ◽  
Electrical Efficiency ◽  
3D Cad ◽  
Wall Structures

Abstract Building integrated photovoltaic (BIPV) facades are a solution to consider when it comes to electricity generation on the building site. One of the main challenges attributes to this technology is finding the best trade-off between the electrical efficiency of BIPVs and the energy use of the building. This study aims to identify a scenario that yields the optimized results for electrical and thermal performance in a test building. Among the scenarios, the original wooden cladding in the test building is either replaced with PV panels or the PV modules are added to the existing facade. Rhinoceros 3D CAD software and its visual programming plugin Grasshopper are used to perform various simulations for both east-oriented and west-oriented façades with low and high thermal inertia wall structures. Although a complex flow phenomenon behind BIPVs is simplified in the 3D heat transfer model, relatively reliable results are obtained using the chosen simulation tool. It is observed that the east-faced BIPV facade in the test building has higher electrical efficiency. This could be attributed to the lower inertia of the east wall that allows easier propagation of heat through the structure.

scholarly journals A Systematic Study of Longwave Radiative Heating and Cooling within Valleys and Basins Using a Three-Dimensional Radiative Transfer Model

2011 ◽  
Vol 50 (12) ◽  
pp. 2473-2489 ◽  
Author(s):  
Sebastian W. Hoch ◽  
C. David Whiteman ◽  
Bernhard Mayer
Keyword(s):  
Surface Temperature ◽  
Three Dimensional ◽  
Temperature Gradients ◽  
Radiative Heating ◽  
Radiative Transfer Model ◽  
Radiative Cooling ◽  
Transfer Model ◽  
Cooling Rates ◽  
Near Surface ◽  
Heating And Cooling

AbstractThe Monte Carlo code for the physically correct tracing of photons in cloudy atmospheres (MYSTIC) three-dimensional radiative transfer model was used in a parametric study to determine the strength of longwave radiative heating and cooling in atmospheres enclosed in idealized valleys and basins. The parameters investigated included valley or basin shape, width, and near-surface temperature contrasts. These parameters were varied for three different representative atmospheric temperature profiles for different times of day. As a result of counterradiation from surrounding terrain, nighttime longwave radiative cooling in topographic depressions was generally weaker than over flat terrain. In the center of basins or valleys with widths exceeding 2 km, cooling rates quickly approached those over flat terrain, whereas the cooling averaged over the entire depression volume was still greatly reduced. Valley or basin shape had less influence on cooling rates than did valley width. Strong temperature gradients near the surface associated with nighttime inversion and daytime superadiabatic layers over the slopes significantly increased longwave radiative cooling and heating rates. Local rates of longwave radiative heating ranged between −30 (i.e., cooling) and 90 K day−1. The effects of the near-surface temperature gradients extended tens of meters into the overlying atmospheres. In small basins, the strong influence of nocturnal near-surface temperature inversions could lead to cooling rates exceeding those over flat plains. To investigate the relative role of longwave radiative cooling on total nighttime cooling in a basin, simulations were conducted for Arizona’s Meteor Crater using observed atmospheric profiles and realistic topography. Longwave radiative cooling accounted for nearly 30% of the total nighttime cooling observed in the Meteor Crater during a calm October night.

scholarly journals Optimal Combination of External Wall Insulation Thickness and Surface Solar Reflectivity of Non-Residential Buildings in the Korean Peninsula

2021 ◽  
Vol 13 (6) ◽  
pp. 3205
Author(s):  
Jung Ho Kim ◽  
Young Il Kim
Keyword(s):  
Korean Peninsula ◽  
Residential Buildings ◽  
Northern Region ◽  
Cooling Load ◽  
Total Load ◽  
Heating And Cooling ◽  
Present Worth ◽  
Insulation Thickness ◽  
Saving Effect ◽  
Insulation Performance

To delay fossil energy depletion and implement the Paris Climate Change Accord, the South Korean government is attempting to reduce greenhouse gas emissions with the establishment of the 2030 Roadmap. The insulation performance of external walls is being continuously enhanced in the architectural domain. However, Korea’s policy and construction market focuses only on the heat resistance of buildings’ external walls to enhance the insulation performance, leading to an increased thickness of the insulation materials. In this study, the relationship between the surface reflectivity and insulation thickness of external walls was examined to formulate an effective insulation strategy for buildings in Korea. Office buildings of 12 regions in the Korean Peninsula were considered. The dynamic energy simulation program EnergyPlus was used to perform the heating and cooling load analyses. The present worth method was adopted to perform the economic analysis. The analysis of the cooling and heating loads indicated that a change occurred not only in terms of the latitude but also between the Eastern and Western regions. The energy consumption could be reduced by increasing the reflectivity in the Southern region and lowering the reflectivity in the Northern region, based on the total load. In addition, a higher latitude corresponded to a higher energy saving effect owing to the increased insulation thickness. In the case of Jeju Island and Busan, regions with a relatively large cooling load and small heating load, the total load is little affected by insulation thickness at high reflectivity. If the external skin was considered to have the optimal reflectivity, the regions for optimal insulation thickness could be divided into three categories: north, central and south.

Buildings

2017 ◽  
Author(s):  
Peter Rez
Keyword(s):  
Heat Transfer ◽  
Heat Pump ◽  
Energy Efficient ◽  
Energy Use ◽  
Fossil Fuel ◽  
Local Climate ◽  
Heating And Cooling ◽  
The Difference ◽  
As If

Most of the energy used by buildings goes into heating and cooling. For small buildings, such as houses, heat transfer by conduction through the sides is as much as, if not greater than, the heat transfer from air exchanges with the outside. For large buildings, such as offices and factories, the greater volume-to-surface ratio means that air exchanges are more significant. Lights, people and equipment can make significant contributions. Since the energy used depends on the difference in temperature between the inside and the outside, local climate is the most important factor that determines energy use. If heating is required, it is usually more efficient to use a heat pump than to directly burn a fossil fuel. Using diffuse daylight is always more energy efficient than lighting up a room with artificial lights, although this will set a limit on the size of buildings.

scholarly journals A Proof-of-Concept Algorithm for the Retrieval of Total Column Amount of Trace Gases in a Multi-Dimensional Atmosphere

2021 ◽  
Vol 13 (2) ◽  
pp. 270
Author(s):  
Adrian Doicu ◽  
Dmitry S. Efremenko ◽  
Thomas Trautmann
Keyword(s):  
Trace Gases ◽  
Three Dimensional ◽  
Principal Component ◽  
Radiative Transfer Model ◽  
Computational Time ◽  
Transfer Model ◽  
Proof Of Concept ◽  
Discrete Ordinate ◽  
Distribution Method ◽  
Total Column

An algorithm for the retrieval of total column amount of trace gases in a multi-dimensional atmosphere is designed. The algorithm uses (i) certain differential radiance models with internal and external closures as inversion models, (ii) the iteratively regularized Gauss–Newton method as a regularization tool, and (iii) the spherical harmonics discrete ordinate method (SHDOM) as linearized radiative transfer model. For efficiency reasons, SHDOM is equipped with a spectral acceleration approach that combines the correlated k-distribution method with the principal component analysis. The algorithm is used to retrieve the total column amount of nitrogen for two- and three-dimensional cloudy scenes. Although for three-dimensional geometries, the computational time is high, the main concepts of the algorithm are correct and the retrieval results are accurate.

scholarly journals Review of Intelligent Control Systems for Natural Ventilation as Passive Cooling Strategy for UK Buildings and Similar Climatic Conditions

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4388
Author(s):  
Esmail Mahmoudi Saber ◽  
Issa Chaer ◽  
Aaron Gillich ◽  
Bukola Grace Ekpeti
Keyword(s):  
Control Systems ◽  
Natural Ventilation ◽  
Energy Use ◽  
Integrated Control ◽  
Climatic Conditions ◽  
Effective Control ◽  
Practical Implementation ◽  
Optimal Output ◽  
Heating And Cooling ◽  
Building Cooling

Natural ventilation is gaining more attention from architects and engineers as an alternative way of cooling and ventilating indoor spaces. Based on building types, it could save between 13 and 40% of the building cooling energy use. However, this needs to be implemented and operated with a well-designed and integrated control system to avoid triggering discomfort for occupants. This paper seeks to review, discuss, and contribute to existing knowledge on the application of control systems and optimisation theories of naturally ventilated buildings to produce the best performance. The study finally presents an outstanding theoretical context and practical implementation for researchers seeking to explore the use of intelligent controls for optimal output in the pursuit to help solve intricate control problems in the building industry and suggests advanced control systems such as fuzzy logic control as an effective control strategy for an integrated control of ventilation, heating and cooling systems.

scholarly journals Towards Sustainable Energy Retrofitting, a Simulation for Potential Energy Use Reduction in Residential Buildings in Palestine

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3876
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Aiman Albatayneh ◽  
Patrick Dutournie ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Models ◽  
Water Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Cooling Loads

Since buildings are one of the major contributors to global warming, efforts should be intensified to make them more energy-efficient, particularly existing buildings. This research intends to analyze the energy savings from a suggested retrofitting program using energy simulation for typical existing residential buildings. For the assessment of the energy retrofitting program using computer simulation, the most commonly utilized residential building types were selected. The energy consumption of those selected residential buildings was assessed, and a baseline for evaluating energy retrofitting was established. Three levels of retrofitting programs were implemented. These levels were ordered by cost, with the first level being the least costly and the third level is the most expensive. The simulation models were created for two different types of buildings in three different climatic zones in Palestine. The findings suggest that water heating, space heating, space cooling, and electric lighting are the highest energy consumers in ordinary houses. Level one measures resulted in a 19–24 percent decrease in energy consumption due to reduced heating and cooling loads. The use of a combination of levels one and two resulted in a decrease of energy consumption for heating, cooling, and lighting by 50–57%. The use of the three levels resulted in a decrease of 71–80% in total energy usage for heating, cooling, lighting, water heating, and air conditioning.

Modeling and Design of Building-Integrated Thermoelectrics

2011 ◽  
Author(s):  
Leon M. Headings ◽  
Gregory N. Washington
Keyword(s):  
Thermal Response ◽  
Heat Pumps ◽  
Coefficient Of Performance ◽  
Conventional Heating ◽  
Net Energy ◽  
Arbitrary Boundary ◽  
Heating And Cooling ◽  
Temperature Oscillations ◽  
Wall Structures ◽  
And Control

The goal of this research is to develop a framework for replacing conventional heating and cooling systems with distributed, continuously and electrically controlled, building-integrated thermoelectric (BITE) heat pumps. The coefficient of performance of thermoelectric heat pumps increases as the temperature difference across them decreases and as the amplitude of temperature oscillations decreases. As a result, this research examines how thermal insulation and mass elements can be integrated with thermoelectrics as part of active multi-layer structures in order to minimize net energy consumption. In order to develop BITE systems, an explicit finite volume model was developed to model the dynamic thermal response of active multi-layer wall structures subjected to arbitrary boundary conditions (interior and exterior temperatures and interior heat loads) and control algorithms. Using this numerical model, the effects of wall construction on net system performance were examined. These simulation results provide direction for the ongoing development of BITE systems.

Study on Energy Consumption Analysis Method of Distributed Cryogenic Separation System

2013 ◽  
Vol 732-733 ◽  
pp. 52-56
Author(s):  
Zhi Guo Wang ◽  
Lei Zhang ◽  
Chai Ling Yin
Keyword(s):  
Energy Use ◽  
Exergy Analysis ◽  
Waste Heat ◽  
Engineering Practice ◽  
Analysis Method ◽  
Analysis Model ◽  
Two Stage ◽  
Separation Plant ◽  
Flow Energy ◽  
Saving Effect

Cryogenic separation method is the main method to recycle NGL (Natural Gas Liquid). Oilfield two-stage expansion NGL cryogenic separation plant is a complex system composed of varieties of material flow, energy flow and equipments, is a typical distributed energy use system composed of three parts, energy supply, energy use and waste heat recovery. In this paper, according to the process characteristics of two-stage expansion cryogenic separation plant, three-box analysis method was used, the system was compartmentalized into six subsystems, represented the exergy analysis model of system—unit—equipment, given the specific analysis process and the assessment rules for the NGL system. Using the practical operational data, the writers conduct the exergy analysis on the operational working condition of Daqing oilfield NGL system. Based on the calculation results, this paper raises some proposals to improve the operational efficiency, and achieved a good energy saving effect in engineering practice.

Sign in / Sign up

Export Citation Format

Share Document