Measurement of Oil Aeration Effects in Journal Bearings

2002 ◽  
Author(s):  
J. L. Nikolajsen ◽  
D. Dong ◽  
M. J. Goodwin
Keyword(s):  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Damping Capacity ◽  
Bearing Load ◽  
Bearing Stiffness

Preliminary measurements have been conducted to determine the effect of oil aeration on journal bearing performance. Oil aeration was observed to reduce the bearing load capacity and to increase the bearing stiffness. Also, the bearing damping capacity was improved significantly by oil aeration.

An Approximate THD Theory for Journal Bearings

1990 ◽  
Vol 112 (2) ◽  
pp. 224-229 ◽  
Author(s):  
G. Gupta ◽  
C. R. Hammond ◽  
A. Z. Szeri
Keyword(s):  
Journal Bearing ◽  
Load Capacity ◽  
Pressure Coefficient ◽  
Journal Bearings ◽  
Maximum Pressure ◽  
Substantial Agreement ◽  
Interactive Mode ◽  
Lubricant Flow ◽  
Bearing Load ◽  
Sophisticated Model

The aim of this paper is to make available to the industrial designer results of the thermohydrodynamic theory of journal bearings, by providing a simplified, yet accurate model of journal bearing lubrication that can be implemented on a personal computer and be used in an interactive mode. The simplified THD theory we propose consists of two coupled ordinary differential equations for pressure and energy and an algebraic equation for viscosity, which are to be solved iteratively. Bearing load capacity, maximum bearing temperature, maximum pressure, coefficient of friction and lubricant flow rate calculated from this simplified theory compare well with results from a more sophisticated model. We also make comparisons with experimental data on full journal bearings, demonstrating substantial agreement between experiment and simplified theory.

Surface Finish and Clearance Effects on Journal-Bearing Load Capacity and Friction

1959 ◽  
Vol 81 (2) ◽  
pp. 245-252 ◽  
Author(s):  
F. W. Ocvirk ◽  
G. B. DuBois
Keyword(s):  
Experimental Data ◽  
Film Thickness ◽  
Surface Finish ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Oil Film ◽  
Bearing Clearance ◽  
Bearing Load

A method of relating surface finish to minimum oil-film thickness and the corresponding load capacity of plain journal bearings is presented with supporting experimental data. The effect of clearance on load capacity and friction are shown on graphs indicating an optimum bearing clearance.

scholarly journals Improvement of Tilting-Pad Journal Bearing Operating Characteristics by Application of Eddy Grooves

Lubricants ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 18
Author(s):  
Eckhard Schüler ◽  
Olaf Berner
Keyword(s):  
High Speed ◽  
Journal Bearing ◽  
Load Capacity ◽  
Fluid Film ◽  
Operating Characteristics ◽  
Fluid Film Bearings ◽  
Tilting Pad ◽  
Bearing Load ◽  
Bearing Loads ◽  
Tilting Pad Journal Bearing

In high speed, high load fluid-film bearings, the laminar-turbulent flow transition can lead to a considerable reduction of the maximum bearing temperatures, due to a homogenization of the fluid-film temperature in radial direction. Since this phenomenon only occurs significantly in large bearings or at very high sliding speeds, means to achieve the effect at lower speeds have been investigated in the past. This paper shows an experimental investigation of this effect and how it can be used for smaller bearings by optimized eddy grooves, machined into the bearing surface. The investigations were carried out on a Miba journal bearing test rig with Ø120 mm shaft diameter at speeds between 50 m/s–110 m/s and at specific bearing loads up to 4.0 MPa. To investigate the potential of this technology, additional temperature probes were installed at the crucial position directly in the sliding surface of an up-to-date tilting pad journal bearing. The results show that the achieved surface temperature reduction with the optimized eddy grooves is significant and represents a considerable enhancement of bearing load capacity. This increase in performance opens new options for the design of bearings and related turbomachinery applications.

A General Solution of Reynolds’ Equation for a Full Finite Journal Bearing

1967 ◽  
Vol 89 (2) ◽  
pp. 203-210 ◽  
Author(s):  
R. R. Donaldson
Keyword(s):  
Fourier Series ◽  
Series Solution ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Load Capacity ◽  
Separation Of Variables ◽  
Hill Equation ◽  
Eigenvalues And Eigenvectors ◽  
General Series ◽  
Bearing Load

Reynolds’ equation for a full finite journal bearing lubricated by an incompressible fluid is solved by separation of variables to yield a general series solution. A resulting Hill equation is solved by Fourier series methods, and accurate eigenvalues and eigenvectors are calculated with a digital computer. The finite Sommerfeld problem is solved as an example, and precise values for the bearing load capacity are presented. Comparisons are made with the methods and numerical results of other authors.

Numerical and Experimental Investigations on Preload Effects in Air Foil Journal Bearings

2017 ◽  
Author(s):  
Marcel Mahner ◽  
Pu Li ◽  
Andreas Lehn ◽  
Bernhard Schweizer
Keyword(s):  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Compressible Fluids ◽  
Experimental Investigations ◽  
Hysteresis Curves ◽  
Numerical Predictions ◽  
Bearing Stiffness ◽  
Gasdynamic Model ◽  
Good Agreement

A detailed elasto-gasdynamic model of a preloaded three-pad air foil journal bearing is presented. Bump and top foil deflections are herein calculated with a nonlinear beamshell theory according to Reissner. The 2D pressure distribution in each bearing pad is described by the Reynolds equation for compressible fluids. With this model, the influence of the assembly preload on the static bearing hysteresis as well as on the aerodynamic bearing performance is investigated. For the purpose of model validation, the predicted hysteresis curves are compared with measured curves. The numerically predicted and the measured hysteresis curves show a good agreement. The numerical predictions exhibit that the assembly preload increases the bearing stiffness (in particular for moderate shaft displacements) and the bearing damping.

A Design of Coverage Area for Textured Surface of Sliding Journal Bearing Based on Genetic Algorithm

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Hui Zhang ◽  
Mahshid Hafezi ◽  
Guangneng Dong ◽  
Yang Liu
Keyword(s):  
Genetic Algorithm ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Textured Surface ◽  
The Novel ◽  
Eccentricity Ratio ◽  
Coverage Area ◽  
Elliptical Shape ◽  
Bearing Load ◽  
Rectangular Grids

This paper aims to improve the tribological performance of journal bearings by optimizing the coverage area of circular microtextures in divergent region of the sleeve. A numerical model is proposed to calculate the friction coefficient and bearing load of textured journal bearings. The surface of the sleeve is divided into rectangular squares. Textures that located at the center of rectangular grids are assumed to be present or absent, marked as 1 and 0, respectively. Afterward, different texture coverage area arrangements are evolved and selected based on the genetic algorithm (GA). The area of semi-elliptical shape is obtained as the novel and preferable textured coverage area design for journal bearings. Influences of width and eccentricity ratio are discussed, which confirm the semimajor and semiminor axes of the semi-elliptical shape of texture coverage area equal to one-third of the circumferential length and half of the width of the journal bearing, respectively.

A Radiometric Test to Determine the Lubricant Effect on Journal Bearing Load Capacity

1980 ◽  
Author(s):  
Arnold O. Dehart ◽  
Richard C. Rosenberg ◽  
Robert F. Hill ◽  
Eric W. Schneider
Keyword(s):  
Journal Bearing ◽  
Load Capacity ◽  
Bearing Load

Steady-State and Dynamic Behaviour of Multi-Recess Hybrid Oil Journal Bearings

1979 ◽  
Vol 21 (5) ◽  
pp. 345-351 ◽  
Author(s):  
M. K. Ghosh ◽  
B. C. Majumdar ◽  
J. S. Rao
Keyword(s):  
Perturbation Theory ◽  
Steady State ◽  
Theoretical Analysis ◽  
Dynamic Behaviour ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Time Dependent ◽  
Damping Coefficients ◽  
Stiffness And Damping

A theoretical analysis of the steady-state and dynamic characteristics of multi-recess hybrid oil journal bearings is presented. A perturbation theory for small vibrations is used to solve an incompressible, finite journal bearing with a time-dependent term. Load capacity, attitude angle, friction parameter, stiffness and damping coefficients are evaluated for a capillary-compensated bearing.

Sign in / Sign up

Export Citation Format

Share Document