Stability Analysis of QFT Controllers Designed for Hydraulic Actuators Using Takagi-Sugeno Fuzzy Modeling Approach

2013 ◽  
Author(s):  
Masoumeh Esfandiari ◽  
Nariman Sepehri
Keyword(s):  
Stability Analysis ◽  
Linear Models ◽  
Fuzzy Model ◽  
Hydraulic Actuators ◽  
Local Linear ◽  
Guaranteed Stability ◽  
Wide Range ◽  
Position Controller ◽  
The Stability ◽  
Takagi Sugeno

Although, robust controllers that have been designed for hydraulic actuators based on quantitative feedback theory (QFT) have shown satisfactory performance, their stability is limited to certain set of inputs-outputs. This paper explores, for the first time, the stability of a QFT controller using stability theorem of Takagi-Sugeno (T-S) fuzzy systems. To do this, first the hydraulic closed-loop system is represented by a T-S fuzzy model that is formed through a nonlinear combination of some local linear models. Next, the stability of the resulting T-S fuzzy system is analyzed simply by stability analysis of its local linear models. This approach is used to study the stability of a QFT position controller previously developed for hydraulic actuators. Results show guaranteed stability of the QFT controller over a wide range of operation and in the presence of parametric uncertainties.

Takagi-Sugeno Fuzzy Load-Following Control of Nuclear Reactors Based on Reactor Point Kinetics Equations

2014 ◽  
Author(s):  
Xiuchun Luan ◽  
Jie Zhou ◽  
Yu Zhai
Keyword(s):  
Control System ◽  
Linear Models ◽  
Fuzzy Controller ◽  
Fuzzy Model ◽  
Linear Matrix ◽  
Neutron Density ◽  
Load Following ◽  
Wide Range ◽  
Takagi Sugeno ◽  
Operating Points

A state differential feedback control system based Takagi-Sugeno (T-S) fuzzy model is designed for load-following operation of nonlinear nuclear reactor whose operating points vary within a wide range. Linear models are first derived from the original nonlinear model on several operating points. Next the fuzzy controller is designed via using the parallel distributed compensation (PDC) scheme with the relative neutron density at the equilibrium point as the premise variable. Last the stability analysis is given by means of linear matrix inequality (LMI) approach, thus the control system is guaranteed to be stable within a large range. The simulation results demonstrate that the control system works well over a wide region of operation.

scholarly journals Actuator Saturated Fuzzy Controller Design for Interval Type-2 Takagi-Sugeno Fuzzy Models with Multiplicative Noises

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 823
Author(s):  
Wen-Jer Chang ◽  
Yu-Wei Lin ◽  
Yann-Horng Lin ◽  
Chin-Lin Pen ◽  
Ming-Hsuan Tsai
Keyword(s):  
Nonlinear Systems ◽  
Fuzzy Controller ◽  
Controller Design ◽  
Actuator Saturation ◽  
Design Method ◽  
Fuzzy Model ◽  
The Stability ◽  
Interval Type ◽  
Takagi Sugeno

In many practical systems, stochastic behaviors usually occur and need to be considered in the controller design. To ensure the system performance under the effect of stochastic behaviors, the controller may become bigger even beyond the capacity of practical applications. Therefore, the actuator saturation problem also must be considered in the controller design. The type-2 Takagi-Sugeno (T-S) fuzzy model can describe the parameter uncertainties more completely than the type-1 T-S fuzzy model for a class of nonlinear systems. A fuzzy controller design method is proposed in this paper based on the Interval Type-2 (IT2) T-S fuzzy model for stochastic nonlinear systems subject to actuator saturation. The stability analysis and some corresponding sufficient conditions for the IT2 T-S fuzzy model are developed using Lyapunov theory. Via transferring the stability and control problem into Linear Matrix Inequality (LMI) problem, the proposed fuzzy control problem can be solved by the convex optimization algorithm. Finally, a nonlinear ship steering system is considered in the simulations to verify the feasibility and efficiency of the proposed fuzzy controller design method.

scholarly journals Takagi-Sugeno fuzzy model identification for turbofan aero-engines with guaranteed stability

2018 ◽  
Vol 31 (6) ◽  
pp. 1206-1214 ◽  
Author(s):  
Ruichao LI ◽  
Yingqing GUO ◽  
Sing Kiong NGUANG ◽  
Yifeng CHEN
Keyword(s):  
Model Identification ◽  
Fuzzy Model ◽  
Guaranteed Stability ◽  
Aero Engines ◽  
Takagi Sugeno

Stability Analysis on S Plane Control of Underwater Vehicles

2013 ◽  
Vol 437 ◽  
pp. 716-721 ◽  
Author(s):  
Yue Ming Li ◽  
Ying Hao Zhang ◽  
Guo Cheng Zhang ◽  
Zhong Hui Hu
Keyword(s):  
Stability Analysis ◽  
Lyapunov Stability ◽  
Stability Theory ◽  
Lyapunov Stability Theory ◽  
Underwater Vehicles ◽  
Velocity Control ◽  
Position Controller ◽  
The Stability

This paper addresses the stability analysis on S Plane Control in terms of both position and velocity control. Employing Lyapunov stability theory and T-passivity theory, this paper proves the stability of the position controller based on S Plane Control, and on this ground, the stability analysis of the velocity controller based on S Plane Control is done. Finally, the S Plane Control results obtained from the sea trials are given.

scholarly journals Dynamic Takagi-Sugeno Model for the Control of Ultrasonic Motor

2011 ◽  
Vol 2011 ◽  
pp. 1-9
Author(s):  
Shi Jingzhuo ◽  
Lv Lin ◽  
Zhang Yu
Keyword(s):  
Experimental Data ◽  
Fuzzy Model ◽  
Calculated Data ◽  
Fuzzy Reasoning ◽  
Ultrasonic Motor ◽  
Driving Voltage ◽  
Driving System ◽  
Position Controller ◽  
Sugeno Model ◽  
Takagi Sugeno

Model of ultrasonic motor is the foundation of the design of ultrasonic motor's speed and position controller. A two-input and one-output dynamic Takagi-Sugeno model of ultrasonic motor driving system is worked out using fuzzy reasoning modeling method in this paper. Many fuzzy reasoning modeling methods are sensitive to the initial values and easy to fall into local minimum, and have a large amount of calculation. In order to overcome these defects, equalized universe method is used in this paper to get clusters centers and obtain fuzzy clustering membership functions, and then, the unknown parameters of the conclusions of fuzzy rules are identified using least-square method. Different experimental data that are tested with different operational conditions are used to examine the validity of the fuzzy model. Comparison between experimental data and calculated data of the model indicates that the model can well describe the nonlinear characteristics among the frequency, amplitude of driving voltage and rotating speed. The proposed fuzzy model can be used to analyze the performance of ultrasonic motor driving system, and also can be used to design the speed and position controller of ultrasonic motor.

Fault-tolerant controller design with fault estimation capability for a class of nonlinear systems using generalized Takagi-Sugeno fuzzy model

2019 ◽  
Vol 41 (15) ◽  
pp. 4218-4229 ◽  
Author(s):  
Alireza Navarbaf ◽  
Mohammad Javad Khosrowjerdi
Keyword(s):  
Nonlinear Systems ◽  
Controller Design ◽  
Fault Tolerant ◽  
Fuzzy Model ◽  
Fault Estimation ◽  
Linear Matrix ◽  
Wide Range ◽  
Satisfy Lipschitz Condition ◽  
Unknown Disturbances ◽  
Takagi Sugeno

In this paper, a new design approach to construct a fault-tolerant controller (FTC) with fault estimation capability is proposed using a generalized Takagi-Sugeno (T-S) fuzzy model for a class of nonlinear systems in the presence of actuator faults and unknown disturbances. The generalized T-S fuzzy model consists of some local models with multiplicative nonlinear terms that satisfy Lipschitz condition. Besides covering a very wide range of nonlinear systems with a smaller number of local rules in comparison with the conventional T-S fuzzy model and hence having less computational burden, the existence of the multiplicative nonlinear term solves the uncontrollability issues that the other generalized T-S fuzzy models with additive nonlinear terms dealt with. A state/fault observer designed for the considered generalized T-S fuzzy model and then, a dynamic FTC law based on the estimated fault information is proposed and sufficient design conditions are given in terms of linear matrix inequalities (LMIs). It can be shown that the number of LMIs are less than that of previously proposed methods and then feasibility of our method is more likely. The effectiveness of the proposed FTC approach is verified using a nonlinear mass-spring-damper system.

STABILITY ANALYSIS OF NONLINEAR INTERCONNECTED SYSTEMS VIA T–S FUZZY MODELS

2004 ◽  
Vol 04 (01) ◽  
pp. 41-55 ◽  
Author(s):  
WEI-LING CHIANG ◽  
CHENG-WU CHEN ◽  
FENG-HSIAG HSIAO
Keyword(s):  
Stability Analysis ◽  
Lyapunov Functions ◽  
Direct Method ◽  
Interconnected Systems ◽  
Linear Matrix ◽  
Matrix Inequality ◽  
Fuzzy Models ◽  
Fuzzy Techniques ◽  
The Stability ◽  
Takagi Sugeno

This paper is concerned with the stability problem of nonlinear interconnected systems. Each of them consists of a few interconnected subsystems which are approximated by Takagi–Sugeno (T–S) type fuzzy models. In terms of Lyapunov's direct method, a stability criterion is derived to guarantee the asymptotic stability of interconnected systems. It is shown that the stability analysis problems of nonlinear interconnected systems can be reduced to linear matrix inequality (LMI) problems via suitable Lyapunov functions and T–S fuzzy techniques. Finally, numerical examples with simulations are given to demonstrate the validity of the proposed approach.

SYNCHRONIZATION OF TIME-DELAYED T–S FUZZY CHAOTIC SYSTEMS VIA SCALAR OUTPUT VARIABLE

2005 ◽  
Vol 15 (08) ◽  
pp. 2593-2601 ◽  
Author(s):  
JAE-HUN KIM ◽  
HYUNSEOK SHIN ◽  
EUNTAI KIM ◽  
MIGNON PARK
Keyword(s):  
Time Delay ◽  
Fuzzy Model ◽  
Order System ◽  
Linear Matrix ◽  
Output Variable ◽  
First Order ◽  
Scalar Output ◽  
The Stability ◽  
Takagi Sugeno ◽  
System With Time Delay

It has been known that very complex chaotic behaviors can be observed in a simple first-order system with time-delay. This paper presents a fuzzy model-based approach for synchronization of time-delayed chaotic system via a scalar output variable. Takagi–Sugeno (T–S) fuzzy model can represent a general class of nonlinear system and we employ it for fuzzy modeling of the chaotic drive and response system with time-delay. Since only a scalar output variable is available for synchronization, a fuzzy observer based on T–S fuzzy model is designed and applied to chaotic synchronization. We analyze the stability of the overall fuzzy synchronization system by applying Lyapunov–Krasovskii theory and derive stability conditions by solving linear matrix inequalities (LMI's) problem. A numerical example is given to demonstrate the validity of the proposed synchronization approach.

Switching Model Construction and Stability Analysis for Nonlinear Systems

2006 ◽  
Vol 10 (1) ◽  
pp. 3-10 ◽  
Author(s):  
Hiroshi Ohtake ◽  
◽  
Kazuo Tanaka
Keyword(s):  
Stability Analysis ◽  
Nonlinear Systems ◽  
Lyapunov Function ◽  
Fuzzy Model ◽  
Function Approach ◽  
Model Construction ◽  
Switching Model ◽  
Piecewise Lyapunov Function ◽  
System A ◽  
The Stability

This paper presents switching model construction and stability analysis for a class of nonlinear systems. A switching fuzzy model newly developed in this paper is employed to represent the dynamics of a nonlinear system. A key feature of the switching fuzzy model construction is to find the so-called minimum distance sector by solving a nonlinear optimization problem. Next, we discuss the stability of a switching fuzzy model. To take advantage of the switching fuzzy model, we introduce a piecewise Lyapunov function that mirrors its structure. We show that the piecewise Lyapunov function approach provides less conservative results for the typical quadratic Lyapunov function approach. Illustrative examples demonstrate the utility of the switching model construction and the stability analysis.

Fuzzy Control for Nonlinear Uncertain T-S Fuzzy Systems with Time-Varying Delays

2013 ◽  
Vol 341-342 ◽  
pp. 668-673
Author(s):  
Yi Min Li ◽  
Yuan Yuan Li
Keyword(s):  
Stability Analysis ◽  
Discrete Time ◽  
Fuzzy Model ◽  
Optimization Techniques ◽  
Linear Matrix ◽  
Time Varying ◽  
Parameter Uncertainties ◽  
Lmi Optimization ◽  
System A ◽  
The Stability

This paper studies the stability analysis of discrete time-varying system with parameter uncertainties and disturbances. The system under consideration is subject to time-varying non-bounded parameter uncertainties in both the state and measured output matrices. To facilitate the stability analysis, the T-S fuzzy model is employed to represent the discrete-time nonlinear system. A fuzzy observer is used to guarantee the Lyapunov stability of the closed-loop system and reduces the effect of the disturbance input on the controlled output to a prescribed level for all admissible uncertainties. The control and observer matrices can be obtained by directly solving a set of linear matrix inequality (LMI) via the existing LMI optimization techniques. Finally, an example is provided to demonstrate the effectiveness of the proposed approach.

Sign in / Sign up

Export Citation Format

Share Document