A Comparison Between the Local Free Convection Heat Transfer Coefficients of Horizontal Cylinders in Vertical and Inclined Arrays

2006 ◽  
Author(s):  
Mehdi Ashjaee ◽  
Tooraj Yousefi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Rayleigh Number ◽  
Free Convection ◽  
Convection Heat Transfer ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Horizontal Cylinder ◽  
Convection Heat ◽  
Free Convection Heat

Laminar free convection heat transfer from vertical and inclined arrays of horizontal isothermal cylinders in air was investigated experimentally and numerically. Experiments were carried out using Mach-Zehnder interferometer and the FLUENT code was used for numerical study. Investigation was performed for vertical and horizontal cylinder spacing from 2 to 5 and to 2 cylinder diameter respectively. The Rayleigh number based on the cylinder diameter varied between 103 and 3×103. The effect of vertical and horizontal cylinder spacing and Rayleigh number on the local heat transfer from each individual cylinder was investigated. It was seen that the local heat transfer coefficient of each cylinder strongly depends on its position relative to the others. This variation of the local heat transfer coefficient was explained by the interaction of plume’s temperature and velocity profiles.

scholarly journals Free Convection Heat Transfer from Horizontal Cylinders

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 559
Author(s):  
Janusz T. Cieśliński ◽  
Slawomir Smolen ◽  
Dorota Sawicka
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Free Convection ◽  
Convection Heat Transfer ◽  
Horizontal Tube ◽  
Correlation Equations ◽  
Convection Heat ◽  
Number Range ◽  
Heated Cylinder ◽  
Free Convection Heat

The results of experimental investigation of free convection heat transfer in a rectangular container are presented. The ability of the commonly accepted correlation equations to reproduce present experimental data was tested as well. It was assumed that the examined geometry fulfils the requirement of no-interaction between heated cylinder and bounded surfaces. In order to check this assumption recently published correlation equations that jointly describe the dependence of the average Nusselt number on Rayleigh number and confinement ratios were examined. As a heat source served electrically heated horizontal tube immersed in an ambient fluid. Experiments were performed with pure ethylene glycol (EG), distilled water (W), and a mixture of EG and water at 50%/50% by volume. A set of empirical correlation equations for the prediction of Nu numbers for Rayleigh number range 3.6 × 104 < Ra < 9.2 × 105 or 3.6 × 105 < Raq < 14.8 × 106 and Pr number range 4.5 ≤ Pr ≤ 160 has been developed. The proposed correlation equations are based on two characteristic lengths, i.e., cylinder diameter and boundary layer length.

scholarly journals CONJUGATE CONDUCTION-FREE CONVECTION HEAT TRANSFER FROM A HORIZONTAL CYLINDER

2013 ◽  
Vol 36 (2) ◽  
pp. 155-166
Author(s):  
M. K. Bassiouny ◽  
F. M. Mahfouz ◽  
S. A. Wilson ◽  
Gamal H. Badawy
Keyword(s):  
Heat Transfer ◽  
Free Convection ◽  
Convection Heat Transfer ◽  
Horizontal Cylinder ◽  
Convection Heat ◽  
Free Convection Heat ◽  
Conjugate Conduction

An Experimental Study on the Effect of Partition Angle on Free Convection Heat Transfer in a Partition Cavity by Laser Interferometry Method

2010 ◽  
Author(s):  
Tooraj Yousefi ◽  
Sajjad Mahmoodi Nezhad ◽  
Masood Bigharaz ◽  
Saeed Ebrahimi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Free Convection ◽  
Average Nusselt Number ◽  
Convection Heat Transfer ◽  
Laser Interferometry ◽  
Heated Wall ◽  
Convection Heat ◽  
Free Convection Heat

Steady state two-dimensional free convection heat transfer in a partitioned cavity with adiabatic horizontal and isothermally vertical walls and an adiabatic partition has been investigated experimentally. The experiments have been carried out using a Mach-Zehnder interferometer. The effects of the angel of the adiabatic partition and Rayleigh number on the heat transfer from the heated wall are investigated. Experiments are performed for the values of Rayleigh number based on the cavity side length in the range between 1.5×105 to 4.5×105 and various angle of the partition with respect to horizon from 0° to 90°. The results indicate that at each angle of the adiabatic partition, by increasing the Rayleigh number, the average Nusselt number and heat transfer increase and at each Rayleigh number, the maximum and the minimum heat transfer occur at θ=45° and θ=90°, respectively. A correlation based on the experimental data for the average Nusselt number of the heated wall as a function of Rayleigh number and the angel of the adiabatic partition is presented in the aforementioned ranges.

Numerical Simulation on Forced Convection Heat Transfer Performance and Pressure Drop of High Permeability Porous Media

2016 ◽  
Author(s):  
Shigeki Hirasawa ◽  
Tsuyoshi Kawanami ◽  
Katsuaki Shirai
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Heat Transfer Coefficient ◽  
Pressure Drop ◽  
Transfer Coefficient ◽  
Air Flow ◽  
Convection Heat Transfer ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Convection Heat

We studied the forced convection heat transfer performance and pressure drop of high permeability metal cellular porous media in air flow using a 3-dimensional thermofluid computation code. The temperature and velocity distributions in the air flow region, local heat transfer coefficient, and local heat flux on the surface of the porous media were numerically calculated for steady air flow by changing the parameters of the pore size and air velocity. The cellular porous media were modeled by pin array, cube geometry, and truncated octahedron geometry using thin wires. The diameter of the wires was 0.1 mm, and the pore per inch (PPI) was 5–50. The relations between the Nusselt number using the volumetric heat transfer coefficient and the Reynolds number were obtained from our calculation results, and we compared them with conventionally proposed experimental correlations. Also, the pressure drop calculation result was compared with conventionally proposed experimental correlations. The following results were obtained. The local heat transfer coefficient and local heat flux on the surface of porous media were small near the joint positions of the wires of the cellular porous media because of the thermal boundary layer. The volumetric heat transfer coefficient and pressure drop agreed with conventionally proposed experimental correlations within errors of twice the volumetric heat transfer coefficient and pressure drop. The relation between the heat transfer rate per unit volume and the heat transfer area per unit volume agreed with the convection heat transfer correlation for a tube bundle.

Sign in / Sign up

Export Citation Format

Share Document