Multi Objective Optimization of Lifecycle Cost, Unmet Load, and Renewable Energy Capacity for an Expansion of Existing Standalone Internal Combustion Generator (ICG) Systems

Author(s):  
A. T. D. Perera ◽  
R. A. Attalage ◽  
K. K. C. K. Perera

Expanding existing Internal Combustion Generator (ICG) systems by incorporating renewable energy sources is getting popular due to its potential to reduce the emission of Green House Gases (GHG) and fuel consumption. Designing such Hybrid Energy System (HES)s become challenging due to the seasonal variation of renewable energy sources resulting either poor reliability of power supply or higher expenditure, which makes it essential to optimize Levelized Energy Cost (LEC), unmet load fraction and renewable energy capacity at the early design stages. This study evaluates the results obtained through such optimization based on evolutionary algorithm. In order to accomplish this, mathematical modeling and simulation of a stand-alone HES was carried out along with the optimization. Obtained results shows that both wind and Solar PV (SPV) capacity is having a significant impact on LEC, unmet load fraction and fuel consumption.

Author(s):  
A. T. D. Perera

The importance of integrating renewable energy sources into standalone energy systems is highlighted in recent literature. Maintaining energy efficiency is challenging in designing such hybrid energy systems (HES) due to seasonal variation of renewable energy potential. This study evaluates the limitations in minimizing the losses in renewable energy generated mainly due to energy storage limitations and minimizing fuel consumption of the internal combustion generator (ICG). A standalone hybrid energy system with Solar PV (SPV), wind, battery bank and an ICG is modeled and optimized in this work. Levelized Energy Cost (LEC), Waste of Renewable Energy (WRE) and Fuel Consumption (FC) are taken as objective functions. Results highlight the importance of considering WRE as an objective function which increase the mix of energy sources that can help to increase the reliability of the system.


This paper comprises exploration of hybrid renewable energy sources (RES) such as solar PV, wind Energy etc. with respect to solar radiation and velocity of wind. Hybrid energy system is a magnificent option for providing power supply to remote locations where grid supply is not reachable. The renewable energy sources (RES) are integrated through DSP with proper programming such that maximum power is fetched through RES. Variations in the output power of solar and wind is analyzed using data obtained through proper integration of RES. The foremost objective of proposed paper is to provide uninterrupted power supply to demand side with scrutiny of hybrid energy sources.


A Smart Grid is a reviving structure of traditional centralized power sector which incorporates smart software and hardware technologies. It provides communication among the prosumers and consumers to achieve sustainability and reliability in an economical way. A microgrid (MG) is a unit of smart grid which consists of distributed energy sources with renewable energy sources, energy storage units and variable loads. Because of stochastic nature of renewable energy sources to maintain balance between supply and demand a novel hybrid energy management controller need to be devised. This paper presents various operational objectives and constraints associated with energy management system of hybrid energy system. Also it compares and discusses various optimization algorithms in the literature.


2019 ◽  
Vol 8 (1) ◽  
pp. 13-30 ◽  
Author(s):  
C. Mekontso ◽  
Abdulkarim Abubakar ◽  
S. Madugu ◽  
O. Ibrahim ◽  
Y. A. Adediran

The growing evidence of the global warning phenomena and the rapid depletion of fossil fuels have drawn the world attention to the exploitation of renewable energy sources (RES). However standalone RES have been proven to be very expensive and unreliable in nature owing to the stochastic nature of the energy sources. Hybrid energy system is an excellent solution for electrification of areas where the grid extension is difficult and not economical. One of the main attribute of hybridising is to be able to optimally size each RES including storages with the aim of minimizing operation costs while efficiently and reliably responding to load demand. Hybrid RES emerges as a trend born out of the need to fully utilize and solve problems associated with the reliability of RES. This paper present a review of techniques used in recent optimal sizing of hybrid RES. It discusses several methodologies and criteria for optimization of hybrid RES. The recent trend in optimization in the field of hybrid RES shows that bio-inspired techniques may provide good optimization of system without extensive long weather data.


Author(s):  
ZHIGANG TIAN ◽  
AMIR AHMAD SEIFI

A hybrid energy system integrates renewable energy sources like wind, solar, micro-hydro and biomass, fossil fuel power generators such as diesel generators and energy storage. Hybrid energy system is an excellent option for providing electricity for remote and rural locations where access to grid is not feasible or economical. Reliability and cost-effectiveness are the two most important objectives when designing a hybrid energy system. One challenge is that the existing methods do not consider the time-varying characteristics of the renewable sources and the energy demand over a year, while the distributions of a power source or demand are different over the period, and multiple power sources can often times complement one another. In this paper, a reliability analysis method is developed to address this challenge, where wind and solar are the two renewable energy sources that are considered. The cost evaluation of hybrid energy systems is presented. A numerical example is used to demonstrate the proposed method.


Author(s):  
Roshani Goel

India’s energy needs are in demand with the increase in energy and other electric uses which is highest among the world. There are sectors which heavily rely on energy generated by fossil fuels but there is also seen a paradigm shift towards renewable energy sources. If India continues to rely on the former then they end up blocking development in energy system meeting uncertainties and face difficulties in supply of fossil fuels. To meet the fast-growing economy, India needs to supply the energy 3-4 times more of what they are supplying now. Government of India has become aware of the situation and has started facilitating polices in action towards a sustainable energy. As of 2019, India’s on grid renewable energy capacity is 85.9 GW. Government is working to establish 500 GW of renewable energy source by 2030.


2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
P. Balamurugan ◽  
S. Kumaravel ◽  
S. Ashok

The focus of the world on renewable energy sources is growing rapidly due to its availability and environment friendliness. However, the renewable energy influenced by natural conditions is being intermittent, it is difficult to accomplish stable energy supply only by one kind of renewable energy source. In order to achieve reliability, it is necessary to integrate two or more energy sources together in an optimal way as hybrid energy system. Optimal allocation of sources, unpredictable load demand, intermittent behaviors of sources, and charging and discharging of storage devices are the major challenges in operating a hybrid energy system. A new controller algorithm is developed and implemented in controller hardware to overcome the above issues. The controller is incorporated in biomass gasifier-based hybrid energy system in a university campus at south India. A case study is carried out in real-time at the site for a typical day. From the experimentation, it is estimated that the annual savings in the operating cost are Rs 375,459.00 ($8475.4) for the optimal allocation of the sources by the controller.


Author(s):  
Jorge Morales Pedraza

Cuba, a small island in the Caribbean Sea with a total land area of 109.884 km2 and a population of around 11.423 million, has no significant proved oil, gas and coal reserves. Also use, in a very limited manner, some of the four main renewable energy sources available in the country for electricity production, generating just 50,1 GW/h or 4,04% of the total electricity consumed in 2015 (20.288 GW/h). In 2016, electricity consumption fell to 15.182 GW/h; this means a reduction of 25% in comparison to 2015. In 2016, the participation of renewable energy sources in the energy mix of the country reached 4,65%. The different renewable energy sources available in the country are hydropower, wind power, solar photovoltaic, and bioenergy. In 2015, out of Cuba’s total 566 MW of renewable energy capacity installed, 83% of the total was in the bioenergy sector. In 2016, the renewable energy capacity installed in the country reached 642 MW. According to the decision adopted by the Cuban government, the participation of renewable energy sources in the energy mix of the country should reach 24% in 2030, an increase of almost 20% compared to the level reported in 2016. Among the different renewable energy sources available in the country, solar energy is one of the main contributors to the national energy system, and also one of the leading supplier of energy to independent users all over the country.


Author(s):  
B. Manoj Kumar ◽  
Ramesh P.

With the degradation of fossil fuels, recent era witness the penetration of renewable energy sources like wind and solar energy into various electrical applications. Integration of these renewable energy sources is of prime importance as they possess zero carbon emission, environmental friendly and zero fuel cost. However, the unpredictability and unreliable nature of solar and wind motivates the combine utilization of these sources i.e. hybrid energy systems. These systems are more reliable and have better continuous production of electrical energy than using the sources individually. Combination of hybrid energy system into grid/standalone applications demands the use of power electronic interface and appropriate control strategy. In this context, this thesis aims at development of a hybrid Photovoltaic (PV)/wind energy based systems for grid connected application. PV and wind are hybridized on a DC side to avoid the synchronizing issues between the sources. However, the proposed hybrid system is integrated on distribution side of the grid with a DC/AC converter (inverter). Considering the essential need of synchronization, the control input i.e. pulses to the inverter are generated from a voltage and frequency controller i.e. Phase Lock Loop (PLL).The task of tuning the controller is formulated as an optimization problem and is solved using Particle Swarm Optimization (PSO) technique. The objective of the system is to meet the load demand and to manage the power generated from different sources at different operating conditions. Each module in the complete system is modeled on Matlab/Simulink platform. Also, the performance of the system is tested for additional utilization of battery charging.


2019 ◽  
Vol 128 ◽  
pp. 05001 ◽  
Author(s):  
Marek Jaszczur ◽  
Qusay Hassan ◽  
Haidar N. Al-Anbagi ◽  
Patryk Palej

The increase in global energy consumption and the expected exhaustion of traditional energy sources, especially in the last century, led to an increased search for alternative sources of energy.The use of renewable energy sources has become extremely important to reduce dependence on fossil fuels. Due to the stochastic nature of the renewable energy sources such as the wind speed fluctuation and the intensity of solar radiation the stable operation of the systems base single renewable source can be problematic. But the using two or more of these sources results in higher stability than relying on a single source. For this reason, hybrid renewable energy systems have become an attractive solution in thefield of renewable energy. A hybrid energy system is a combination of two or more renewable energy sources that can enhance each another to increase the reliability of the supplied energy. The objective of this paper is investigation about the energy supplying improvement and the energy efficiency utilisation by hybridisation using two renewable energy resources: wind energy and solar energy with respect two different optimisation objectives: economical to reduce the net present cost and ecological to reduce CO2 emissions. Presented system has been implemented to supply a single household with an electric load.


Sign in / Sign up

Export Citation Format

Share Document