Graph Partitioning Technique to Identify Physically Integrated Design Concepts

2018 ◽  
Author(s):  
Praveen Kumare Gopalakrishnan ◽  
Helen Kain ◽  
Sogol Jahanbekam ◽  
Sara Behdad
Keyword(s):  
Additive Manufacturing ◽  
Graph Partitioning ◽  
Integrated Design ◽  
Specific Method ◽  
Functional Requirements ◽  
Design Concepts ◽  
Physical Elements ◽  
Manufacturing Technologies ◽  
The Impact ◽  
Integration Concept

This study proposes a graph partitioning method to facilitate the idea of physical integration proposed in Axiomatic Design. According to the physical integration concept, the design features should be integrated into a single physical part or a few parts with the aim of reducing the information content, given that the independence of functional requirements is still satisfied. However, no specific method is suggested in the literature for determining the optimal degree of physical integration of a design artifact. This is particularly important with the current advancement in Additive Manufacturing technologies. Since additive manufacturing allows physical elements to be integrated, new methods are needed to help designers evaluate the impact of the physical integration on the design success. The objective of this paper is to develop a framework for determining the best way that functional requirements can be assigned to different parts of a product.

A GRAPH PARTITIONING TECHNIQUE TO OPTIMIZE THE PHYSICAL INTEGRATION OF FUNCTIONAL REQUIREMENTS FOR AXIOMATIC DESIGN

2021 ◽  
pp. 1-12
Author(s):  
Emilyn Green ◽  
Spenser Estrada ◽  
Praveen Kumare Gopalakrishnan ◽  
Sogol Jahanbekam ◽  
Sara Behdad
Keyword(s):  
Graph Partitioning ◽  
Axiomatic Design ◽  
Design Parameters ◽  
Specific Method ◽  
Functional Requirement ◽  
Functional Requirements ◽  
Target Number ◽  
New Methods ◽  
Physical Elements ◽  
Manufacturing Technologies

Abstract According to the concept of physical integration as understood in Axiomatic Design, design parameters of a product should be integrated into a single physical part or a few parts with the aim of reducing the information content, while still satisfying the independence of functional requirement. However, no specific method is suggested in the literature for determining the optimal degree of physical integration in a given design. This is particularly important with the current advancement in technologies such as additive manufacturing. As new manufacturing technologies allow physical elements to be integrated in new ways, new methods are needed to help designers optimize physical integration given the specific constraints and conflicts of each design. This study proposes an algorithm which uses graph partitioning to allow a designer to optimize the integration of functional requirements into a target number of parts, with the goal of minimizing the co-allocation of incompatible functional requirements in the same part. The operation and viability of the algorithm is demonstrated via two numerical examples and a practical example of designing a pencil.

scholarly journals Environmental and Economic Analysis of FDM, SLS and MJF Additive Manufacturing Technologies

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4161 ◽  
Author(s):  
Vincenzo Tagliaferri ◽  
Federica Trovalusci ◽  
Stefano Guarino ◽  
Simone Venettacci
Keyword(s):  
Additive Manufacturing ◽  
High Performance ◽  
Large Scale ◽  
Fused Deposition Modeling ◽  
Production Capacity ◽  
Optimal Choice ◽  
Scale Production ◽  
Fused Deposition ◽  
Manufacturing Technologies ◽  
The Impact

In this study, the authors present a comparative analysis of different additive manufacturing (AM) technologies for high-performance components. Four 3D printers, currently available on the Italian national manufacturing market and belonging to three different AM technologies, were considered. The analysis focused on technical aspects to highlight the characteristics and performance limits of each technology, economic aspects to allow for an assessment of the costs associated with the different processes, and environmental aspects to focus on the impact of the production cycles associated with these technologies on the ecosystem, resources and human health. This study highlighted the current limits of additive manufacturing technologies in terms of production capacity in the case of large-scale production of plastic components, especially large ones. At the same time, this study highlights how the geometry of the object to be developed greatly influences the optimal choice between the various AM technologies, in both technological and economic terms. Fused deposition modeling (FDM) is the technology that exhibits the greatest limitations hindering mass production due to production times and costs, but also due to the associated environmental impact.

Plastic and metal additive manufacturing technologies for microwave passive components up toKaband

2018 ◽  
Vol 10 (7) ◽  
pp. 772-782
Author(s):  
Johann Sence ◽  
William Feuray ◽  
Aurélien Périgaud ◽  
Olivier Tantot ◽  
Nicolas Delhote ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Additive Manufacturing ◽  
Dielectric Material ◽  
Mode Converter ◽  
Fused Deposition ◽  
3D Printed ◽  
The Creation ◽  
Manufacturing Technologies ◽  
Plastic Parts ◽  
The Impact

AbstractThis paper illustrates the different possibilities given by additive manufacturing technologies for the creation of passive microwave hardware. The paper more specifically highlights a prototyping scheme where the 3D-printed plastic parts can be used as initial proofs of concept before considering more advanced 3D-printed parts (metal parts, for instance). First, a characterization campaign has been made on common plastics used by a 3D printer using the fused deposition modeling and material jetting (Polyjet©) technologies. The impact of the manufacturing strategy (high-speed or high-accuracy) on the part roughness, as well as on the dielectric material permittivity and loss tangent, has been specifically studied at 10 and 16 GHz. Based on a specifically optimized and deeply explained characterization method, the conductivity of a coating based on silver paint has also been characterized on such plastic parts at 10 and 40 GHz. These plastic materials and coating have been used for the creation of quasi-elliptic and tuning-free bandpass filters centered at 6 and 12 GHz and compared with a similar filter made of stainless steel by selective laser melting. Finally, a compact rectangularTE10to circularTE01mode converter also undergoes one prototyping step out of plastic before moving to an advanced part made out of stainless steel. This mode converter, which is made in a single part, is designed to operate from 28 to 36 GHz as a tuning-free final demonstrator.

scholarly journals Study of the Impact of the Synergic Line and the Strategy of Conception on Ti-6Al-4V Wire Arc Additive Manufacturing Process (WAAM-CMT)

2021 ◽  
Vol 1016 ◽  
pp. 250-255
Author(s):  
Achraf Ayed ◽  
Guénolé Bras ◽  
Henri Bernard ◽  
Pierre Michaud ◽  
Yannick Balcaen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Process Parameters ◽  
Travel Speed ◽  
Feed Speed ◽  
Thin Walls ◽  
Direct Energy ◽  
Wire Feed Speed ◽  
Manufacturing Technologies ◽  
The Impact ◽  
Wire Arc Additive Manufacturing

In additive manufacturing, technologies based on the fusion of a metallic wire using an electric arc represent an interesting alternative to current manufacturing processes, particularly for large metal parts, thanks to higher deposition rates and lower process costs than powder or wire-laser technologies. A versatile 3D printing device using a DED-W Arc (Direct Energy Deposition by wire-arc) station to melt a metallic filler wire is developed to build titanium parts by optimizing the process parameters and control the geometrical, metallurgical and the mechanical properties of produced parts. In this study, the impact of two different CMT synergic lines on the energetic and geometric behavior of Ti-6Al-4V single deposits is highlighted. These are related to first order parameters: wire feed speed (WFS) and travel speed (TS). The results show difference on energy, geometric of deposits and different deposition regime between these two law with identical process parameters. The second part of this study focuses on the transition from single deposits to walls and blocks. By first choosing the best set of process parameters to make the construction of thin walls (composed of stacked layers), and then the research the optimal horizontal step of deposition (overlapping) for thicker constructions, results obtained made it possible to validate transition from single deposits (1D) to thick walls (3D) without any weld pool collapse or lack of fusion.

State Medical Board Disciplinary Hearings as Tools for Teaching Professionalism in Medical Education

2011 ◽  
Vol 97 (3) ◽  
pp. 8-12
Author(s):  
Onelia G. Lage ◽  
Sydney F. Pomenti ◽  
Edwin Hayes ◽  
Kristen Barrie ◽  
Nancy Baker
Keyword(s):  
Medical Students ◽  
Ethics Education ◽  
Faculty Members ◽  
Specific Method ◽  
Pilot Studies ◽  
Medical Board ◽  
Medical Institutions ◽  
State Medical Boards ◽  
State Medical Board ◽  
The Impact

ABSTRACT This article proposes a partnership of state medical boards with medical schools to supplement professionalism and ethics education for medical students, residents, physicians and faculty members of medical institutions. The importance of professionalism has been recognized by several studies, but a specific method of teaching and developing professionalism has yet to emerge. Studies suggest that there is an association between a lack of professionalism in medical school and future disciplinary actions by medical boards. However, there has been little collaboration between these institutions in addressing unprofessional behaviors. One collaborative concept that holds promise, however, is the idea of inviting medical students to attend physician disciplinary hearings. Students and physicians alike report that watching a hearing can significantly impact attitudes about professionalism as a part of medical practice. While formal research is scarce, the positive response of individual students who experience disciplinary hearings firsthand suggests that further pilot studies may be useful. Presented in this paper are the perspectives of three individuals — a medical student, a faculty member and a medical board chair — who discuss the impact and potential of attending disciplinary hearings in developing professionalism and ethics. Also included is a review of the current literature.

scholarly journals A STRUCTURED APPROACH TO REDUCE DESIGN ITERATIONS IN ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 231-240
Author(s):  
Laura Wirths ◽  
Matthias Bleckmann ◽  
Kristin Paetzold
Keyword(s):  
Additive Manufacturing ◽  
Spare Parts ◽  
Design Guidelines ◽  
Final Part ◽  
Layer By Layer ◽  
Powder Bed ◽  
Batch Sizes ◽  
Manufacturing Technologies ◽  
Structured Approach ◽  
Design Freedom

AbstractAdditive Manufacturing technologies are based on a layer-by-layer build-up. This offers the possibility to design complex geometries or to integrate functionalities in the part. Nevertheless, limitations given by the manufacturing process apply to the geometric design freedom. These limitations are often unknown due to a lack of knowledge of the cause-effect relationships of the process. Currently, this leads to many iterations until the final part fulfils its functionality. Particularly for small batch sizes, producing the part at the first attempt is very important. In this study, a structured approach to reduce the design iterations is presented. Therefore, the cause-effect relationships are systematically established and analysed in detail. Based on this knowledge, design guidelines can be derived. These guidelines consider process limitations and help to reduce the iterations for the final part production. In order to illustrate the approach, the spare parts production via laser powder bed fusion is used as an example.

scholarly journals Connectivity as a Design Feature for Industry 4.0 Production Equipment: Application for the Development of an In-Line Metrology System

2021 ◽  
Vol 11 (3) ◽  
pp. 1312
Author(s):  
Ana Pamela Castro-Martin ◽  
Horacio Ahuett-Garza ◽  
Darío Guamán-Lozada ◽  
Maria F. Márquez-Alderete ◽  
Pedro D. Urbina Coronado ◽  
...  
Keyword(s):  
Industry 4.0 ◽  
Design Feature ◽  
Production Equipment ◽  
Smart Manufacturing ◽  
Process Data ◽  
Industrial Sectors ◽  
Advanced Manufacturing Technologies ◽  
Manufacturing Technologies ◽  
Equipment Application ◽  
The Impact

Industry 4.0 (I4.0) is built upon the capabilities of Internet of Things technologies that facilitate the recollection and processing of data. Originally conceived to improve the performance of manufacturing facilities, the field of application for I4.0 has expanded to reach most industrial sectors. To make the best use of the capabilities of I4.0, machine architectures and design paradigms have had to evolve. This is particularly important as the development of certain advanced manufacturing technologies has been passed from large companies to their subsidiaries and suppliers from around the world. This work discusses how design methodologies, such as those based on functional analysis, can incorporate new functions to enhance the architecture of machines. In particular, the article discusses how connectivity facilitates the development of smart manufacturing capabilities through the incorporation of I4.0 principles and resources that in turn improve the computing capacity available to machine controls and edge devices. These concepts are applied to the development of an in-line metrology station for automotive components. The impact on the design of the machine, particularly on the conception of the control, is analyzed. The resulting machine architecture allows for measurement of critical features of all parts as they are processed at the manufacturing floor, a critical operation in smart factories. Finally, this article discusses how the I4.0 infrastructure can be used to collect and process data to obtain useful information about the process.

scholarly journals Adhesion Studies during Generative Hybridization of Textile-Reinforced Thermoplastic Composites via Additive Manufacturing

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3888
Author(s):  
Johanna Maier ◽  
Christian Vogel ◽  
Tobias Lebelt ◽  
Vinzenz Geske ◽  
Thomas Behnisch ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Polyamide 6 ◽  
Thermoplastic Composites ◽  
Efficient Production ◽  
Angle Measurements ◽  
Small Series ◽  
Contact Angle Measurements ◽  
Static Tensile ◽  
Pre Treatment ◽  
Manufacturing Technologies

Generative hybridization enables the efficient production of lightweight structures by combining classic manufacturing processes with additive manufacturing technologies. This type of functionalization process allows components with high geometric complexity and high mechanical properties to be produced efficiently in small series without the need for additional molds. In this study, hybrid specimens were generated by additively depositing PA6 (polyamide 6) via fused layer modeling (FLM) onto continuous woven fiber GF/PA6 (glass fiber/polyamide 6) flat preforms. Specifically, the effects of surface pre-treatment and process-induced surface interactions were investigated using optical microscopy for contact angle measurements as well as laser profilometry and thermal analytics. The bonding characteristic at the interface was evaluated via quasi-static tensile pull-off tests. Results indicate that both the bond strength and corresponding failure type vary with pre-treatment settings and process parameters during generative hybridization. It is shown that both the base substrate temperature and the FLM nozzle distance have a significant influence on the adhesive tensile strength. In particular, it can be seen that surface activation by plasma can significantly improve the specific adhesion in generative hybridization.

Sign in / Sign up

Export Citation Format

Share Document