On the Design of Singularity-Free Cable-Driven Parallel Mechanism Based on Grassmann Geometry

2012 ◽  
Author(s):  
Yu Zou ◽  
Yuru Zhang ◽  
Yaojun Zhang
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Singularity Analysis ◽  
Geometric Meaning ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Singular Configurations ◽  
Negative Effect ◽  
Grassmann Line Geometry ◽  
Grassmann Geometry

This paper deals with the design of singularity-free cable-driven parallel mechanism. Due to the negative effect on the performance, singularities should be avoided in the design. The singular configurations of mechanisms can be numerically determined by calculating the rank of its Jacobian matrix. However, this method is inefficient and non-intuitive. In this paper, we investigate the singularities of planar and spatial cable-driven parallel mechanisms using Grassmann line geometry. Considering cables as line vectors in projective space, the singularity conditions are identified with clear geometric meaning which results in useful method for singularity analysis of the cable-driven parallel mechanisms. The method is applied to 3-DOF planar and 6-DOF spatial cable-driven mechanisms to determine their singular configurations. The results show that the singularities of both mechanisms can be eliminated by changing the dimensions of the mechanisms or adding extra cables.

Singularity Analysis of 5-RPRRR Parallel Mechanisms via Grassmann Line Geometry

2009 ◽  
Author(s):  
Mehdi Tale Masouleh ◽  
Cle´ment Gosselin
Keyword(s):  
Jacobian Matrix ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
General Mechanism ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Line Geometry ◽  
Singular Configurations ◽  
Highly Nonlinear ◽  
Grassmann Line Geometry

This paper investigates the singular configurations of five-degree-of-freedom parallel mechanisms generating the 3T2R motion and comprising five identical legs of the RPUR type. The general mechanism was recently revealed by performing the type synthesis for symmetrical 5-DOF parallel mechanisms. In this study, some simplified designs are proposed for which the singular configurations can be predicted by means of the so-called Grassmann line geometry. This technique can be regarded as a powerful tool for analyzing the degeneration of the Plu¨cker screw set. The main focus of this contribution is to predict the actuation singularity, for a general and simplified design, without expanding the determinant of the inverse Jacobian matrix (actuated constraints system) which is highly nonlinear and difficult to analyze.

Combinatorial Method for Characterizing Singular Configurations in Parallel Mechanisms

2015 ◽  
Author(s):  
Avshalom Sheffer ◽  
Offer Shai
Keyword(s):  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Combinatorial Method ◽  
Combinatorial Characterization ◽  
Singular Configurations ◽  
Grassmann Line Geometry ◽  
2D And 3D ◽  
Grassmann Cayley Algebra

The paper presents a method for finding the different singular configurations of several types of parallel mechanisms/robots using the combinatorial method. The main topics of the combinatorial method being used are: equimomental line/screw, self-stresses, Dual Kennedy theorem and circle, and various types of 2D and 3D Assur Graphs such as: triad, tetrad and double triad. The paper introduces combinatorial characterization of 3/6 SP and compares it to singularity analysis of 3/6 SP using Grassmann Line Geometry and Grassmann-Cayley Algebra. Finally, the proposed method is applied for characterizing the singular configurations of more complex parallel mechanisms such as 3D tetrad and 3D double-triad.

Singularity Analysis of Large Workspace 3RRRS Parallel Mechanism Using Line Geometry and Linear Complex Approximation

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Alon Wolf ◽  
Daniel Glozman
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Community Research ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Equilibrium Equations ◽  
Six Degrees Of Freedom ◽  
Singular Configurations

During the last 15 years, parallel mechanisms (robots) have become more and more popular among the robotics and mechanism community. Research done in this field revealed the significant advantage of these mechanisms for several specific tasks, such as those that require high rigidity, low inertia of the mechanism, and/or high accuracy. Consequently, parallel mechanisms have been widely investigated in the last few years. There are tens of proposed structures for parallel mechanisms, with some capable of six degrees of freedom and some less (normally three degrees of freedom). One of the major drawbacks of parallel mechanisms is their relatively limited workspace and their behavior near or at singular configurations. In this paper, we analyze the kinematics of a new architecture for a six degrees of freedom parallel mechanism composed of three identical kinematic limbs: revolute-revolute-revolute-spherical. We solve the inverse and show the forward kinematics of the mechanism and then use the screw theory to develop the Jacobian matrix of the manipulator. We demonstrate how to use screw and line geometry tools for the singularity analysis of the mechanism. Both Jacobian matrices developed by using screw theory and static equilibrium equations are similar. Forward and inverse kinematic solutions are given and solved, and the singularity map of the mechanism was generated. We then demonstrate and analyze three representative singular configurations of the mechanism. Finally, we generate the singularity-free workspace of the mechanism.

Development of a novel two-limbed parallel mechanism having Schönflies motion

2014 ◽  
Vol 229 (1) ◽  
pp. 136-154 ◽  
Author(s):  
Sung Mok Kim ◽  
Kyoosik Shin ◽  
Byung-Ju Yi ◽  
Wheekuk Kim
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Model ◽  
Singularity Analysis ◽  
Short Description ◽  
High Potential ◽  
Haptic Device ◽  
Line Geometry ◽  
Grassmann Line Geometry ◽  
Schönflies Motion ◽  
Very High

This paper introduces a novel parallel mechanism having Schönflies motion. The mechanism consists of only two RRPaR-type limbs. After a short description of its structure, its position analysis is conducted and its screw-based kinematic model is derived. Next, its singularity analysis is performed via Grassmann line geometry and then its optimal kinematic characteristics are examined with respect to workspace size and isotropy property. The results show that the proposed parallel mechanism has a very high potential to be used as a manipulator or a haptic device. A prototype of this mechanism was developed and tested to corroborate its performance.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

A geometric approach for singularity analysis of 3-DOF planar parallel manipulators using Grassmann–Cayley algebra

Robotica ◽  
2015 ◽  
Vol 35 (3) ◽  
pp. 511-520 ◽  
Author(s):  
Kefei Wen ◽  
TaeWon Seo ◽  
Jeh Won Lee
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Geometric Approach ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Singular Configurations ◽  
Cayley Algebra ◽  
Grassmann Cayley Algebra ◽  
Planar Parallel Manipulators

SUMMARYSingular configurations of parallel manipulators (PMs) are special poses in which the manipulators cannot maintain their inherent infinite rigidity. These configurations are very important because they prevent the manipulator from being controlled properly, or the manipulator could be damaged. A geometric approach is introduced to identify singular conditions of planar parallel manipulators (PPMs) in this paper. The approach is based on screw theory, Grassmann–Cayley Algebra (GCA), and the static Jacobian matrix. The static Jacobian can be obtained more easily than the kinematic ones in PPMs. The Jacobian is expressed and analyzed by the join and meet operations of GCA. The singular configurations can be divided into three classes. This approach is applied to ten types of common PPMs consisting of three identical legs with one actuated joint and two passive joints.

A Quasi-Static Model for Planar Compliant Parallel Mechanisms

2009 ◽  
Vol 1 (2) ◽  
Author(s):  
Cyril Quennouelle ◽  
Clément Gosselin
Keyword(s):  
Parallel Mechanism ◽  
Applied Load ◽  
Jacobian Matrix ◽  
Static Model ◽  
Parallel Mechanisms ◽  
Compliance Matrix ◽  
End Effector ◽  
Kinematic Constraints ◽  
Compliant Parallel Mechanism ◽  
External Loads

In this paper, the mobility, the kinematic constraints, the pose of the end-effector, and the static constraints that lead to the kinematostatic model of a compliant parallel mechanism are introduced. A formulation is then provided for its instantaneous variation—the quasi-static model. This new model allows the calculation of the variation in the pose as a linear function of the motion of the actuators and the variation in the external loads through two new matrices: the compliant Jacobian matrix and the Cartesian compliance matrix that give a simple and meaningful formulation of the model of the mechanism. Finally, a simple application to a planar four-bar mechanism is presented to illustrate the use of this model and the new possibilities that it opens, notably the study of the kinematics for any range of applied load.

Singularity Analysis of a Novel 4-DOFs Parallel Robot H4 by Using Screw Theory

2003 ◽  
Author(s):  
Hee-Byoung Choi ◽  
Atsushi Konno ◽  
Masaru Uchiyama
Keyword(s):  
Closed Loop ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Loop Structure ◽  
Singular Configurations ◽  
Planning And Control ◽  
Kinematic Singularities ◽  
And Control

The closed-loop structure of a parallel robot results in complex kinematic singularities in the workspace. Singularity analysis become important in design, motion, planning, and control of parallel robot. The traditional method to determine a singular configurations is to find the determinant of the Jacobian matrix. However, the Jacobian matrix of a parallel manipulator is complex in general, and thus it is not easy to find the determinant of the Jacobian matrix. In this paper, we focus on the singularity analysis of a novel 4-DOFs parallel robot H4 based on screw theory. Two types singularities, i.e., the forward and inverse singularities, have been identified.

scholarly journals Singularity Conditions of 3T1R Parallel Manipulators With Identical Limb Structures

2012 ◽  
Vol 4 (1) ◽  
Author(s):  
Semaan Amine ◽  
Mehdi Tale Masouleh ◽  
Stéphane Caro ◽  
Philippe Wenger ◽  
Clément Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type Synthesis ◽  
Constraint Analysis ◽  
Fixed Direction ◽  
Geometric Singularity ◽  
Grassmann Geometry ◽  
Grassmann Cayley Algebra

This paper deals with the singularity analysis of parallel manipulators with identical limb structures performing Schönflies motions, namely, three independent translations and one rotation about an axis of fixed direction (3T1R). Eleven architectures obtained from a recent type synthesis of such manipulators are analyzed. The constraint analysis shows that these architectures are all overconstrained and share some common properties between the actuation and the constraint wrenches. The singularities of such manipulators are examined through the singularity analysis of the 4-RUU parallel manipulator. A wrench graph representing the constraint wrenches and the actuation forces of the manipulator is introduced to formulate its superbracket. Grassmann–Cayley Algebra is used to obtain geometric singularity conditions. Based on the concept of wrench graph, Grassmann geometry is used to show the rank deficiency of the Jacobian matrix for the singularity conditions. Finally, this paper shows the general aspect of the obtained singularity conditions and their validity for 3T1R parallel manipulators with identical limb structures.

Design of a new gravity balanced parallel mechanism with Schönflies motion

2016 ◽  
Vol 230 (17) ◽  
pp. 3111-3134 ◽  
Author(s):  
Long Kang ◽  
Se-Min Oh ◽  
Wheekuk Kim ◽  
Byung-Ju Yi
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Force Transmission ◽  
Kinematic Modeling ◽  
Potential Applications ◽  
Structure Description ◽  
Grassmann Line Geometry ◽  
Schönflies Motion ◽  
Forward Kinematic

In this paper, a new gravity-balanced 3T1R parallel mechanism is addressed. Firstly, structure description, inverse and forward kinematic modeling are performed in detail. Secondly, Jacobian derivation based on screw theory and singularity analysis using Grassmann Line Geometry is performed, and then optimal kinematic design with respect to workspace size, kinematic isotropy and maximum force transmission ratio are conducted. Thirdly, the gravity balancing design using both counterweights and springs is proposed and a prototype of this mechanism is also presented. Results of analysis show that the proposed mechanism has quite a few potential applications.

Sign in / Sign up

Export Citation Format

Share Document