A Quasi-Static Model for Planar Compliant Parallel Mechanisms

2009 ◽  
Vol 1 (2) ◽  
Author(s):  
Cyril Quennouelle ◽  
Clément Gosselin
Keyword(s):  
Parallel Mechanism ◽  
Applied Load ◽  
Jacobian Matrix ◽  
Static Model ◽  
Parallel Mechanisms ◽  
Compliance Matrix ◽  
End Effector ◽  
Kinematic Constraints ◽  
Compliant Parallel Mechanism ◽  
External Loads

In this paper, the mobility, the kinematic constraints, the pose of the end-effector, and the static constraints that lead to the kinematostatic model of a compliant parallel mechanism are introduced. A formulation is then provided for its instantaneous variation—the quasi-static model. This new model allows the calculation of the variation in the pose as a linear function of the motion of the actuators and the variation in the external loads through two new matrices: the compliant Jacobian matrix and the Cartesian compliance matrix that give a simple and meaningful formulation of the model of the mechanism. Finally, a simple application to a planar four-bar mechanism is presented to illustrate the use of this model and the new possibilities that it opens, notably the study of the kinematics for any range of applied load.

Instantaneous Kinemato-Static Model of Planar Compliant Parallel Mechanisms

2008 ◽  
Author(s):  
Cyril Quennouelle ◽  
Cle´ment Gosselin
Keyword(s):  
Degrees Of Freedom ◽  
Applied Load ◽  
Jacobian Matrix ◽  
Compliant Mechanism ◽  
Static Model ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Kinematic Constraints ◽  
The Matrix ◽  
External Loads

In this paper, the number of degrees of freedom, the kinematic constraints, the pose of the end-effector and the static constraints that lead to the Kinemato-Static Model of a Compliant Mechanism are introduced. A formulation is then provided for the Instantaneous Kinemato-Static Model. This new model enables to calculate the variation of the pose as a linear function of the motion of the actuators and the variation of the external loads through two new matrices: the compliant Jacobian matrix and the matrix of compliance that give a simple and meaningful formulation of the model of the mechanism.r Finally, a simple application to a 4-bar mechanism is presented to illustrate the use of this model and the new possibilities that it opens, notably the study of the kinematics for any range of applied load.

Active Compliant Parallel Mechanisms

2014 ◽  
Author(s):  
Matthew Holgate ◽  
Thomas G. Sugar
Keyword(s):  
Parallel Mechanism ◽  
Gear Ratio ◽  
Parallel Mechanisms ◽  
Output Link ◽  
End Effector ◽  
Attachment Point ◽  
The Third ◽  
Output Torque ◽  
Compliant Parallel Mechanism ◽  
Parallel Fashion

In a novel compliant parallel mechanism, a motor and spring are arranged in a parallel fashion and are connected to a movable lever arm. The motor pushes and pulls on one attachment point and the spring stores and releases energy at a second attachment point. In a non-obvious choice, we do not attach the output link to the commonly thought of end-effector, but to the third link in the planar, parallel mechanism. The new mechanism allows the transmission ratio of the motor to be a function of the output angle and the force applied at the spring. For example, if there are no loads on the spring, the overall gear ratio is lowered, and the output speed can be increased. Conversely, if there are loads on the spring, the overall gear ratio is increased, and the output torque can be increased.

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Hao Pan ◽  
Genliang Chen ◽  
Yezheng Kang ◽  
Hao Wang
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Accuracy Evaluation ◽  
Elastic Rods ◽  
Parallel Mechanisms ◽  
Flexible Link ◽  
Large Space ◽  
Compliance Matrix ◽  
End Effector ◽  
Principal Axes

Abstract Intrinsic passive compliance of flexible-link parallel mechanisms makes them suitable for situations where compliant manipulation is necessary. In this work, through using elastic rods as limbs, a flexible-link parallel mechanism whose end effector can move translationally with a large workspace is proposed. The middle plate and end effector are connected to the base via two groups of three elastic rods, which are arranged in a cylindrically symmetric way with a phase difference of 60 deg. Concurrently, the middle plate is coupled with the elastic rods connected to the end effector via sliding connection. Besides, a rotating set of coplanar wheels is introduced to provide smooth coupling for the prototype. Three actuation modules are used to drive the end effector, while another three to compensate toward its configuration deviations caused by deformation compatibility. Then, based on principal axes decomposition of compliance matrix, kinetostatics models for inverse and forward kinematics are established. The numerical analysis reveals that the end effector can make quasi 3-degrees-of-freedom (DOF) translation in a large space with extremely small twist. Finally, workspace experiments at four typical slices and pose accuracy evaluation along continuous trajectories are carried out, and the results demonstrate that our design and theoretical model are correct.

Experimental Validation of the Kinematics of a 3PRS Compliant Mechanism for Micromilling

2015 ◽  
Author(s):  
Antonio Ruiz ◽  
Francisco Campa Gomez ◽  
Constantino Roldan-Paraponiaris ◽  
Oscar Altuzarra
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Experimental Validation ◽  
Compliant Mechanism ◽  
Motion Controller ◽  
End Effector ◽  
Compliant Joints ◽  
Hybrid Manipulator ◽  
Compliant Parallel Mechanism ◽  
Actuated Joints

The present work deals with the development of a hybrid manipulator of 5 degrees of freedom for milling moulds for microlenses. The manipulator is based on a XY stage under a 3PRS compliant parallel mechanism. The mechanism takes advantage of the compliant joints to achieve higher repetitiveness, smoother motion and a higher bandwidth, due to the high precision demanded from the process, under 0.1 micrometers. This work is focused on the kinematics of the compliant stage of the hybrid manipulator. First, an analysis of the workspace required for the milling of a single mould has been performed, calculating the displacements required in X, Y, Z axis as well as two relative rotations between the tool and the workpiece from a programmed toolpath. Then, the 3PRS compliant parallel mechanism has been designed using FEM with the objective of being stiff enough to support the cutting forces from the micromilling, but flexible enough in the revolution and spherical compliant joints to provide the displacements needed. Finally, a prototype of the 3PRS compliant mechanism has been built, implementing a motion controller to perform translations in Z direction and two rotations. The resulting displacements in the end effector and the actuated joints have been measured and compared with the FEM calculations and with the rigid body kinematics of the 3PRS.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

Relevance and Transferability for Parallel Mechanisms With Reconfigurable Platforms

2019 ◽  
Vol 11 (3) ◽  
Author(s):  
Xi Kang ◽  
Jian S. Dai
Keyword(s):  
System Theory ◽  
Parallel Mechanism ◽  
Geometric Model ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Kinematic Coupling ◽  
Reconfigurable Platforms ◽  
Reconfigurable Platform

The parallel mechanism with a reconfigurable platform retains all advantages of parallel mechanisms and provides additional functions by virtue of the reconfigurable platform, leading to kinematic coupling between limbs that restricts development of the mechanism. This paper aims at dealing with kinematic coupling between limbs by investigating the transferability of limb constraints and their degrees of relevance to the platform constraints based on the geometric model of the mechanism. The paper applies screw-system theory to verifying the degree of relevance between limb constraint wrenches and platform constraint wrenches, and reveals the transferability of limb constraints, to obtain the final resultant wrenches and twists of the end effector. The proposed method is extended to parallel mechanisms with planar n-bar reconfigurable platforms, spherical n-bar reconfigurable platforms, and other spatial reconfigurable platforms and lends itself to a way of studying a parallel mechanism with a reconfigurable platform.

The Mechanics of Parallel Mechanisms and Walking Machines

1994 ◽  
Vol 208 (6) ◽  
pp. 367-377 ◽  
Author(s):  
S J Zhang ◽  
D J Sanger ◽  
D Howard
Keyword(s):  
Parallel Mechanism ◽  
Virtual Work ◽  
The Body ◽  
Position Vector ◽  
Parallel Mechanisms ◽  
Active Joint ◽  
End Effector ◽  
Walking Machine ◽  
Walking Machines ◽  
Fixed Base

A parallel mechanism is one whose links and joints form two or more serially connected chains which join the fixed base and the end effector The mechanism of a multi-legged walking machine can be considered as a parallel mechanism whose base is not fixed and whose configuration changes during different phases of its gait. This paper presents methods for analysing the mechanics of parallel mechanisms and walking machines using vector and screw algebra Firstly, displacement analysis is covered; this includes general methods for deriving the position vector of any joint in any leg and for calculating the active joint displacements in any leg. Secondly, velocity analysis is covered which tackles the problem of calculating active joint velocities given the velocity, position and the orientation of the body and the positions of the feet. Thirdly, the static analysis of these classes of mechanisms using the principle of virtual work and screw algebra is given. Expressions are derived for the actuator forces and torques required to balance a given end effector (or body) wrench and, in the case of a walking machine, the ground reactions at the feet. Numerical examples are given to demonstrate the application of these methods.

scholarly journals Collision-free workspace of parallel mechanisms based on an interval analysis approach

Robotica ◽  
2016 ◽  
Vol 35 (8) ◽  
pp. 1747-1760 ◽  
Author(s):  
MohammadHadi FarzanehKaloorazi ◽  
Mehdi Tale Masouleh ◽  
Stéphane Caro
Keyword(s):  
Interval Analysis ◽  
Parallel Mechanism ◽  
Spherical Shape ◽  
Stewart Platform ◽  
Analysis Approach ◽  
Parallel Mechanisms ◽  
Planar Case ◽  
End Effector ◽  
Mechanical Interference

SUMMARYThis paper proposes an interval-based approach in order to obtain the obstacle-free workspace of parallel mechanisms containing one prismatic actuated joint per limb, which connects the base to the end-effector. This approach is represented through two cases studies, namely a 3-RPR planar parallel mechanism and the so-called 6-DOF Gough–Stewart platform. Three main features of the obstacle-free workspace are taken into account: mechanical stroke of actuators, collision between limbs and obstacles and limb interference. In this paper, a circle(planar case)/spherical(spatial case) shaped obstacle is considered and its mechanical interference with limbs and edges of the end-effector is analyzed. It should be noted that considering a circle/spherical shape would not degrade the generality of the problem, since any kind of obstacle could be replaced by its circumscribed circle/sphere. Two illustrative examples are given to highlight the contributions of the paper.

scholarly journals Synthesis method of two translational compliant mechanisms with redundant actuation

2021 ◽  
Vol 12 (2) ◽  
pp. 983-995
Author(s):  
Shihua Li ◽  
Yajie Zhou ◽  
Yanxia Shan ◽  
Shuang Chen ◽  
Jinhan Han
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Synthesis Method ◽  
Synthesis Process ◽  
Parallel Mechanisms ◽  
Synthesis Conditions ◽  
Compliant Parallel Mechanism ◽  
Atlas Method ◽  
Driving Stability

Abstract. In the fields of electronic packaging, micromanipulation, scanning, and two translational (2T) mechanisms are required, especially with high stiffness, for a large workspace, with good driving stability, and other occasions. Redundant actuators are required to improve the performance of the 2T compliant parallel mechanism. The novelty of the work is to propose a new method for the type synthesis of a 2T redundant actuated compliant parallel mechanism based on the freedom and constraint topology (FACT) approach and the atlas approach. The synthesis conditions are given, and the synthesis process is formulated. With this method, new 2T redundant actuated compliant parallel mechanisms are synthesized. Some new mechanisms have been synthesized, which enriches the compliant parallel mechanism configurations. Based on the atlas method, the synthesized mechanism is analyzed. The results verify the correctness and effective of the synthesis method. The method is also suitable for a type of synthesis of redundant actuated compliant parallel mechanisms with 3, 4, 5, and 6 degrees of freedom (DOF), respectively.

scholarly journals Type synthesis and kinematics analysis of a family of three translational and one rotational pick-and-place parallel mechanisms with high rotational capability

2019 ◽  
Vol 11 (6) ◽  
pp. 168781401985307
Author(s):  
Xing Zhang ◽  
Dejun Mu ◽  
Yuze Liu ◽  
Jie Bi ◽  
Hongrui Wang
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Hessian Matrix ◽  
Parallel Mechanisms ◽  
Kinematics Analysis ◽  
Type Synthesis ◽  
Lie Group Theory ◽  
Revolute Joints ◽  
Pick And Place ◽  
Pick And Place Operation

This article proposes a family of spatial three translational and one rotational parallel mechanisms (PMs) for pick-and-place operation. Their features are one independent rotation of the mechanism with four identical limbs, which are provided by the four revolute joints on the moving platform. The rotational capability of the PMs has a range of at least 180°. This article focuses on the synthesis of the PMs and kinematics analysis of the 4- P(2-SS)R parallel mechanism. First, based on the Lie group theory, three parallelograms are used in designing the PMs. The limbs are listed and two types of three translational and one rotational PMs are synthesized. Then, a typical 4- P(2-SS)R PM is selected, the 6 × 6 Jacobian matrix and the 6 × 6 × 6 Hessian matrix of the mechanism are derived for solving the displacement, velocity, and acceleration of the mechanism. Finally, singularity configurations are disclosed from the 6 × 6 Jacobian matrix, and the workspace of the mechanism is provided to illustrate the high rotational capability.

Sign in / Sign up

Export Citation Format

Share Document