Classification of Screw Systems Composed of Three Planar Pencils of Lines

2012 ◽  
Author(s):  
Xianwen Kong ◽  
Andrew Johnson
Keyword(s):  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
Spherical Joint ◽  
Geometric Characteristics ◽  
Singular Configuration ◽  
Kinematic Joint

Screw systems composed of three planar pencils of lines are closely related to the singularity analysis of a number of 3-legged parallel manipulators in which the passive joints in each leg are a spherical joint and a single-DOF (degree-of-freedom) kinematic joint or generalized kinematic joint. This paper systematically classifies the screw systems composed of three planar pencils of lines. The classification is based on the intersection of two planar pencils of lines, the classification of screw systems of order 2, and the reciprocal screw system of the three planar pencils of lines. The classification in this paper is more comprehensive than those in the literature. The above results are illustrated using CAD figures. This work may help readers better understand the geometric characteristics of the singular configuration of a number of 3-legged parallel manipulators.

Classification of Screw Systems Composed of Three Planar Pencils of Lines for Singularity Analysis of Parallel Mechanisms1

2014 ◽  
Vol 6 (2) ◽  
Author(s):  
Xianwen Kong ◽  
Andrew Johnson
Keyword(s):  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
Spherical Joint ◽  
Geometric Characteristics ◽  
Singular Configurations ◽  
Kinematic Joint

Screw systems composed of (the sum of) three planar pencils of lines are closely related to the singularity analysis of a number of three-legged parallel manipulators (PMs) in which the passive joints in each leg are a spherical joint and a single-DOF (degree of freedom) kinematic joint or generalized kinematic joint. This paper systematically classifies the screw systems composed of three planar pencils of lines based on the intersection of two planar pencils of lines, the classification of screw systems of order 2, and the reciprocal screw system of the three planar pencils of lines. The classification in this paper is more comprehensive than those in the literature. The above results are illustrated using CAD figures. This work may help readers better understand the geometric characteristics of singular configurations of a number of three-legged parallel manipulators.

Geometric Interpretation of Singular Configurations of a Class of Parallel Manipulators

2011 ◽  
Author(s):  
Xianwen Kong ◽  
Jingjun Yu ◽  
Cle´ment Gosselin
Keyword(s):  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Geometric Interpretation ◽  
Spherical Joint ◽  
Kinematic Singularity ◽  
Geometric Characteristics ◽  
Singular Configurations ◽  
Parallel Kinematic ◽  
Forward Kinematic

This paper proposes an equivalent serial kinematic chain approach to identify the geometric characteristics of singular configurations of a class of parallel manipulators, which can be reduced to a structure composed of three XS and/or SX legs. Here, S and X denote respectively a spherical joint and a one-degree-of-freedom joint or generalized joint. The equivalent serial kinematic chain associated with a parallel kinematic chain composed of two XS legs is first obtained using the concept of reciprocal screws. The forward kinematic singularity (also static singularity) analysis of the parallel manipulators is then reduced to the singularity (stability) analysis of a single-loop structure. Finally, the geometric characteristics of singular configurations of the class of parallel manipulators are obtained with almost no algebraic derivation.

Forward Displacement Analysis of a Linearly Actuated Quadratic Spherical Parallel Manipulator

2010 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment Gosselin ◽  
James M. Ritchie
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Actuated Joints ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

A quadratic parallel manipulator refers to a parallel manipulator with a quadratic characteristic polynomial. This paper revisits the forward displacement analysis (FDA) of a linearly actuated quadratic spherical parallel manipulator. An alternative formulation of the kinematic equations of the quadratic spherical parallel manipulator is proposed. The singularity analysis of the quadratic spherical parallel manipulator is then dealt with. A new type of singularity of parallel manipulators — leg actuation singularity — is identified. If a leg is in a leg actuation singular configuration, the actuated joints in this leg cannot be actuated even if the actuated joints in other legs are released. A formula is revealed that produces a unique current solution to the FDA for a given set of inputs. The input space is also revealed for the quadratic spherical parallel manipulator in order to guarantee that the robot works in the same assembly mode. This work may facilitate the control of the quadratic spherical parallel manipulator.

Forward Displacement Analysis and Singularity Analysis of a Special 2-DOF 5R Spherical Parallel Manipulator

2011 ◽  
Vol 3 (2) ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type I ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Self Motion ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

This paper deals with the forward displacement analysis and singularity analysis of a special 2-DOF 5R spherical parallel manipulator, in which the angle between the axes of any two adjacent revolute joints is a right angle. An alternative formulation of the kinematic equations of the 5R spherical parallel manipulator is proposed. A formula is then derived to produce directly the unique current solution to the forward displacement analysis of the 5R spherical parallel manipulator. It will also be addressed to keep the spherical parallel manipulator in the same working mode and assembly mode by simply restraining the range of an input angle. Unlike other parallel manipulators, the 5R spherical parallel manipulator always undergoes self-motion in a type-II singular configuration, and the 3R leg of the 5R spherical parallel manipulator also always undergoes self-motion in a type-I singular configuration.

A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators

2012 ◽  
Vol 4 (4) ◽  
Author(s):  
Xin-Jun Liu ◽  
Chao Wu ◽  
Jinsong Wang
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Challenging Problem ◽  
Performance Indices ◽  
New Approach ◽  
Singular Configurations ◽  
Different Types ◽  
Force Transmissibility ◽  
Singular Configuration

Singularity analysis is one of the most important issues in the field of parallel manipulators. An approach for singularity analysis should be able to not only identify all possible singularities but also explain their physical meanings. Since a parallel manipulator is always out of control at a singularity and its neighborhood, it should work far from singular configurations. However, how to measure the closeness between a pose and a singular configuration is still a challenging problem. This paper presents a new approach for singularity analysis of parallel manipulators by taking into account motion/force transmissibility. Several performance indices are introduced to measure the closeness to singularities. By using these indices, a uniform “metric” can be found to represent the closeness to singularities for different types of nonredundant parallel manipulators.

scholarly journals Interior singularity analysis for a 2(3HUS+S) parallel manipulator with descending matrix rank method

2019 ◽  
Vol 16 (1) ◽  
pp. 172988141982684
Author(s):  
Feng Guo ◽  
Gang Cheng ◽  
Zunzhong Zhao
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singular Locus ◽  
Singularity Analysis ◽  
Normal Operation ◽  
Motion Path ◽  
Moving Platforms ◽  
Singular Configuration ◽  
The Relationship ◽  
Interior Singularity

Singularity analysis is one of the basic problems for parallel manipulators. When a manipulator moves in a singular configuration, the motion and transmission performance are poor. In certain serious cases, the normal operation could be damaged. Based on the topology structure and kinematics analysis of a 2(3HUS+S) parallel manipulator, the Jacobian matrices were established. Then, the singular locus surface was obtained by numerical simulation. In addition, the relationship between the motion path curve and the singular locus surface was analyzed. In this study, α, β, and γ are the attitude angles that describe the motion of moving platforms. There is a nonsingular attitude space in singular locus surfaces, and the singular locus surface is a single surface in a small attitude angle range. The nonsingular attitude space increases as the absolute value of γ increases, and singularity could be avoided when γ is large. Furthermore, the motion path curve passes through the singular locus surface two times, and the two intersection points are consistent with the positions where the motion dexterity is equal to zero. This study provides new insights on the singularity analysis of parallel manipulators, particularly for the structure parameter optimization of the nonsingular attitude space.

Singularity Analysis of a New 2-DOF Parallel Tilter

2012 ◽  
Vol 224 ◽  
pp. 504-509
Author(s):  
Hai Dong Wang ◽  
Jing Sun ◽  
Yu Quan Bi ◽  
Mao Sheng Yang
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
Coordinate Transformations ◽  
Analytic Equation ◽  
Singular Configuration ◽  
Two Degree Of Freedom

One type of spatial new parallel mechanism with two degree of freedom is proposed.. The position and velocity analytic equation are constructed based on the coordinate transformations. Finally, the singular configuration of the tilter is analyzed by the forward and the inverse Jacobian matrix.

Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms

2004 ◽  
Vol 126 (1) ◽  
pp. 109-118 ◽  
Author(s):  
Jing Wang ◽  
Cle´ment M. Gosselin
Keyword(s):  
Kinematic Analysis ◽  
Main Idea ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
Redundant Manipulators ◽  
Parallel Mechanisms ◽  
Jacobian Matrices ◽  
Kinematic Chains ◽  
Analysis And Design

This paper addresses the singularity analysis and the design of three new types of kinematically redundant parallel mechanisms, i.e., the four-degree-of-freedom planar and spherical parallel mechanisms and the seven-degree-of-freedom spatial Stewart platform. The main idea in the design of these parallel manipulators is the addition of one redundant degree of freedom in one of the kinematic chains of the nonredundant manipulator. Such manipulators can be used to avoid the singularities inside the workspace of nonredundant manipulators. After describing the geometry of the manipulators, the velocity equations are derived and the expressions for the Jacobian matrices are obtained. Then, the singularity conditions are discussed. Finally, the expressions of the singularity loci of the kinematically redundant mechanisms are obtained and the singularity loci of the nonredundant and redundant manipulators are compared. It is shown here that the conditions for the singularity of the redundant manipulators are reduced drastically relative to the nonredundant ones. As a result, the proposed kinematically redundant parallel manipulators may be of great interest in several applications.

Investigation of Parallel Manipulators Using Linear Complex Approximation

2003 ◽  
Vol 125 (3) ◽  
pp. 564-572 ◽  
Author(s):  
A. Wolf ◽  
M. Shoham
Keyword(s):  
Singular Point ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Line Geometry ◽  
Complex Approximation ◽  
Linear Complex ◽  
Additional Information ◽  
Physical Understanding ◽  
Singular Configuration

This investigation deals with singularity analysis of parallel manipulators and their instantaneous behavior while in or close to a singular configuration. The method presented utilizes line geometry tools and screw theory to describe a manipulator in a given position. Then, this description is used to obtain the closest linear complex, presented by its screw coordinates, to the set of governing lines of the manipulator. The linear complex axis and pitch provide additional information and a better physical understanding of the type of singularity and the motion the manipulator tends to perform in a singular point and in its neighborhood. Examples of Hunt’s, Fichter’s and 3-UPU singularities, along with a few selected examples taken from Merlet’s work [1], are presented and analyzed using this method.

A Differential-Geometric Analysis of Singularities of Point Trajectories of Serial and Parallel Manipulators

1998 ◽  
Vol 123 (1) ◽  
pp. 80-89 ◽  
Author(s):  
Ashitava Ghosal ◽  
Bahram Ravani
Keyword(s):  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Rate Of Change ◽  
Degree Of Freedom ◽  
Task Space ◽  
Singular Configurations ◽  
Point Trajectories ◽  
Singular Configuration ◽  
Three Degree Of Freedom ◽  
Derivatives Of

In this paper, we present a differential-geometric approach to analyze the singularities of task space point trajectories of two and three-degree-of-freedom serial and parallel manipulators. At non-singular configurations, the first-order, local properties are characterized by metric coefficients, and, geometrically, by the shape and size of a velocity ellipse or an ellipsoid. At singular configurations, the determinant of the matrix of metric coefficients is zero and the velocity ellipsoid degenerates to an ellipse, a line or a point, and the area or the volume of the velocity ellipse or ellipsoid becomes zero. The degeneracies of the velocity ellipsoid or ellipse gives a simple geometric picture of the possible task space velocities at a singular configuration. To study the second-order properties at a singularity, we use the derivatives of the metric coefficients and the rate of change of area or volume. The derivatives are shown to be related to the possible task space accelerations at a singular configuration. In the case of parallel manipulators, singularities may lead to either loss or gain of one or more degrees-of-freedom. For loss of one or more degrees-of-freedom, the possible velocities and accelerations are again obtained from a modified metric and derivatives of the metric coefficients. In the case of a gain of one or more degrees-of-freedom, the possible task space velocities can be pictured as growth to lines, ellipses, and ellipsoids. The theoretical results are illustrated with the help of a general spatial 2R manipulator and a three-degree-of-freedom RPSSPR-SPR parallel manipulator.

Sign in / Sign up

Export Citation Format

Share Document