Computational Prediction of Electric Fields in Shallow Water Testing Environment

Author(s):  
Stephanie A. Wimmer ◽  
Virginia G. DeGiorgi ◽  
Elizabeth A. Hogan

There has been an increased need for understanding of how ship’s cathodic protection systems work in shallow water environment. This is a result of the evolving role of the US Navy. The existing cathodic protection system design process relies on experimental processes. This paper investigates a proposed modification to a deep water experimental facility to allow for measurements of electrical fields, a pertinent design measurement, in shallow water conditions. The modifications involve the insertion of a false bottom in the existing deep water tank. The work presented here are a series of computational studies that establish that the insertion of a false bottom would provide an electric field environment that is equivalent to shallow water for the depths considered.

2020 ◽  
Vol 67 (4) ◽  
pp. 427-434
Author(s):  
Haijing Sun ◽  
Weihai Xue ◽  
Jiaxin Xu ◽  
Guoliang Chen ◽  
Jie Sun

Purpose The purpose of this work is to provide theoretical guidance and experimental analysis for optimized cathodic protection (CP) design of low alloy steel in deep water environments. Design/methodology/approach In the present study, the CP criteria of 10Ni5CrMoV low alloy steel were investigated in a simulated deep water environment (350 m) regarding the theoretical protection potential and measured protection potential. The influences of hydrostatic pressure (HP) and temperature were also discussed in detail. The theoretical protection potential was analyzed with the Nernst equation, and the measured minimum protection potential was derived by extrapolating the Tafel portion of anodic polarization curves. Findings The results indicate that the minimum protection potential of low alloy steel shifts to a positive value in a deep-ocean environment. This can be attributed to the combined effects of HP and the temperature. Moreover, the temperature has a stronger influence compared with HP. The results suggest that the CP potential criteria used in shallow water are still applicable in the deep ocean, which is further confirmed through the SEM and x-ray diffraction analysis of the corrosion products resulted from the potentiostatic cathodic polarization experiments at −0.85 VCSE. Originality/value In recent decades, successful applications of CP for long-term corrosion protection of the steel components applied at a subsea level have enabled the offshore industry to develop reliable and optimized CP systems for shallow water. However, differences in the seawater environment at greater depths have raised concerns regarding the applicability of the existing CP design for deeper water environments. Hence, this research focuses on the CP criteria of low alloy steel in simulated deep water environment concerning the theoretical protection potential and measured protection potential. The influences of HP and temperature were also discussed.


Author(s):  
Robert L. Carroll

ABSTRACTOf all the localities that have yielded a diversity of Carboniferous tetrapods, the fossil assemblage at East Kirkton most closely resembles that of the Joggins locality in Nova Scotia. Both assemblages are dominated by dendrerpetontid temnospondyls and a smaller number of small anthracosaurs, which are thought to have been primarily terrestrial in habits. Both localities lack adelogyrinids and lysorophids, and such presumably deep water genera as Crassigyrinusand large embolomeres. The East Kirkton Limestone differs in the presence of aïstopods and a possible nectridean, which are associated with a shallow-water environment in other localities. The absence of amniotes and microsaurs may be explained by the later evolution of these groups, their limited geographical distribution, or the lack of any aspects of the depositional environment that would preferentially select primarily terrestrial animals.


2012 ◽  
Vol 548 ◽  
pp. 682-685
Author(s):  
Yu Guo ◽  
An Kang Hu ◽  
Hai Tao Dong

Cathodic protection (CP) systems are commonly designed by estimating the overall current demand and then developing an anode configuration sufficient to protect the structure. To a large extent the performance of a CP system is dependent on the skill and experience of the corrosion specialist. As the structures become more complex these traditional approaches may become less reliable. Given the factor it becomes imperative that corrosion engineers are able to predict the electric fields as part of the design process. The difficulty in making reliable estimates for cases can be overcome by using corrosion simulation software as a design tool. Not only can corrosion simulation software help with understanding complex corrosion behavior but it can also provide a rapid and economic assessment of CP system designs. In this paper two-dimensional mathematical model using the polarization properties of P110 and G3 as the solving boundary conditions, used numerical simulation software ANSYS to solve. In same time, a cathodic protection polarization simulating device was established. The changing tendency between the simulation results and experimental data matched well, which verify the correctness of modeling and accuracy of numerical simulation.


2012 ◽  
Vol 567 ◽  
pp. 275-282
Author(s):  
Yi Huang ◽  
Zhi Gang Fang

In order to study “shielding effect” problems of sacrificial anode cathodic protection system in the ballast water tanks, two sets of experiments, the “block-type shielding effect” and the “absorbed-type shielding effect” are carried out by changing the clapboard height and the distance from the upper surface of sacrificial anode to the copper tube, and corresponding numerical simulations are carried out. Both of the experimental data and the numerical simulation results illustrate the two kinds of “shielding effect” as mentioned above, and according to which, both the two kinds of “shielding effect” should be surely taken into account in sacrificial anode cathodic protection system for a ballast water tank.


Author(s):  
Jon R. Ineson ◽  
John S. Peel

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Ineson, J. R., & Peel, J. S. (1997). Cambrian shelf stratigraphy of North Greenland. Geology of Greenland Survey Bulletin, 173, 1-120. https://doi.org/10.34194/ggub.v173.5024 _______________ The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.


2011 ◽  
Vol 45 (3) ◽  
pp. 69-76 ◽  
Author(s):  
Tom Fedenczuk ◽  
Eva-Marie Nosal

AbstractShallow water acoustics provide a means for monitoring and surveillance of near-shore environments. This paper describes the current and future capabilities of the low- to high-frequency Hawaii Experimental Acoustics Range (HEAR) that was designed to facilitate a wide range of different shallow water acoustics experiments and allow researchers from various institutions to test various array components and configurations. HEAR is a portable facility that consists of multiple hydrophones (12‐16) cabled independently to a common central node. The design allows for variable array configurations and deployments in three modes: experimental (off boats and piers), autonomous, and cabled. An application of HEAR is illustrated by the results from a deployment at Makai Research Pier, Oahu, Hawaii. In this deployment, HEAR was configured as a long-baseline range of two volumetric subarrays to study passive acoustic tracking capabilities in a shallow water environment.


Sign in / Sign up

Export Citation Format

Share Document