The Research of Slag-Detecting Vibration Method Based on HMM in Continuous Casting

2005 ◽  
Author(s):  
Peiyu Li ◽  
Guo Liu ◽  
Dapeng Tan ◽  
Zhaohui Wu ◽  
Lei Wang
Keyword(s):  
Continuous Casting ◽  
Vibration Method

Vibration Method to Detect Liquid-Solid Fraction and Final Solidifying End for Continuous Casting Slab

2013 ◽  
Vol 84 (8) ◽  
pp. 724-731 ◽  
Author(s):  
Zhaofeng Wang ◽  
Xudong Wang ◽  
Fubin Liu ◽  
Man Yao ◽  
Xiaobing Zhang ◽  
...  
Keyword(s):  
Continuous Casting ◽  
Solid Fraction ◽  
Vibration Method ◽  
Continuous Casting Slab

Ultra low aluminium DWI grade development of an atypical continuous casting powder with high viscosity

2009 ◽  
Vol 106 (6) ◽  
pp. 242-247
Author(s):  
C. Damerval ◽  
H. Tavernier ◽  
L. Avedian ◽  
P. Disant ◽  
P. Delfosse ◽  
...  
Keyword(s):  
Continuous Casting ◽  
High Viscosity

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Assessment of the Peritectic Behavior in the Continuous Casting Mold

2020 ◽  
Author(s):  
C. Ortner ◽  
L. Martins Demuner ◽  
M. Schuster ◽  
O. Lang ◽  
F. Ramstorfer
Keyword(s):  
Continuous Casting ◽  
Continuous Casting Mold ◽  
Casting Mold
Sign in / Sign up

Export Citation Format

Share Document