Superharmonic Resonance of Order 2 for an Impacting Hertzian Contact Oscillator: Theory and Experiments

2005 ◽  
Author(s):  
Joe¨l Perret-Liaudet ◽  
Emmanuel Rigaud
Keyword(s):  
Threshold Level ◽  
Wide Frequency Range ◽  
Hertzian Contact ◽  
Frequency Range ◽  
Test Rig ◽  
Response Curves ◽  
Superharmonic Resonance ◽  
Moving Body ◽  
Oscillator Theory ◽  
Theory And Experiments

The purpose of this paper is to investigate experimental responses of a preloaded vibroimpact Hertzian contact to an order 2 superharmonic excitation. A test rig is used, corresponding to a double sphere-plane contact preloaded by the weight of a moving body. Typical response curves are obtained kinder the superharmonic excitation. The Hertzian non linearity constitutes the precursor of vibroimpacts established over a wide frequency range. This behaviour can be related to the existence of a transcritical bifurcation. In conjuction with the experiments, numerical results lead to the same conclusion. In particular, the threshold level of the excitation necessary to induce vibroimpact is confirmed.

Superharmonic Resonance of Order 2 for an Impacting Hertzian Contact Oscillator: Theory and Experiments

2006 ◽  
Vol 2 (2) ◽  
pp. 190-196 ◽  
Author(s):  
Joël Perret-Liaudet ◽  
Emmanuel Rigaud
Keyword(s):  
Threshold Level ◽  
Wide Frequency Range ◽  
Hertzian Contact ◽  
Frequency Range ◽  
Test Rig ◽  
Response Curves ◽  
Superharmonic Resonance ◽  
Moving Body ◽  
Oscillator Theory ◽  
Theory And Experiments

The purpose of this paper is to investigate experimental responses of a preloaded vibroimpact Hertzian contact to an order 2 superharmonic excitation. A test rig is used, corresponding to a double sphere–plane contact preloaded by the weight of a moving body. Typical response curves are obtained under the superharmonic excitation. The Hertzian nonlinearity constitutes the precursor of vibroimpacts established over a wide frequency range. This behavior can be related to the existence of a transcritical bifurcation. In conjuction with the experiments, numerical results lead to the same conclusion. In particular, the threshold level of the excitation necessary to induce vibroimpact is confirmed.

Installation for testing electronic voltmeters over a wide frequency range

1976 ◽  
Vol 19 (10) ◽  
pp. 1525-1526
Author(s):  
A. M. Fedorov ◽  
V. V. Krestovskii ◽  
V. S. Kiselev ◽  
S. A. Razumovskii ◽  
V. A. Shcheglov
Keyword(s):  
Wide Frequency Range ◽  
Frequency Range

Analysis of Dielectric Spectra of Water with Conductive Impurities in a Wide Frequency Range

2018 ◽  
Vol 60 (11) ◽  
pp. 1893-1900 ◽  
Author(s):  
V. A. Zhuravlev ◽  
V. I. Suslyaev ◽  
A. V. Zhuravlev ◽  
E. Yu. Korovin
Keyword(s):  
Wide Frequency Range ◽  
Frequency Range ◽  
Dielectric Spectra

scholarly journals Bearing defect diagnosis and acoustic emission

2003 ◽  
Vol 217 (4) ◽  
pp. 257-272 ◽  
Author(s):  
A Morhain ◽  
D Mba
Keyword(s):  
Acoustic Emission ◽  
Threshold Level ◽  
Diagnostic Methods ◽  
Non Destructive Testing ◽  
Test Rig ◽  
Destructive Testing ◽  
High Background ◽  
Bearing Defect ◽  
Non Destructive ◽  
Ae Counts

Acoustic emission (AE) was originally developed for non-destructive testing of static structures, but over the years its application has been extended to health monitoring of rotating machines and bearings. It offers the advantage of earlier defect detection in comparison with vibration analysis. However, limitations in the successful application of the AE technique for monitoring bearings have been partly due to the difficulty in processing, interpreting and classifying the acquired data. The investigation reported in this paper was centred on the application of standard AE characteristic parameters on a radially loaded bearing. An experimental test rig was modified such that defects could be seeded onto the inner and outer races of a test bearing. As the test rig was adapted for this purpose, it offered high background acoustic emission noise providing a realistic test for fault diagnosis. In addition to a review of current diagnostic methods for applying AE to bearing diagnosis, the results of this investigation validated the use of r. m. s., amplitude, energy and AE counts for diagnosis. Furthermore, this study determined the most appropriate threshold level for AE count diagnosis, the first known attempt.

Sign in / Sign up

Export Citation Format

Share Document