Synthesis and Experimental Validation of Dynamic Parts-Orienting Devices

1992 ◽  
Author(s):  
Inhwan Han ◽  
B. J. Gilmore ◽  
M. M. Ogot
Keyword(s):  
High Speed ◽  
Experimental Validation ◽  
Cost Effective ◽  
Design Tool ◽  
Kinematic Constraints ◽  
Dynamic Synthesis ◽  
Orientation Systems ◽  
Part Orientation ◽  
Impact With Friction ◽  
Synthesis Approach

Abstract Part orientation is an important aspect of factory automation. The parts-orienters presented by this paper are flexible to handle a variety of parts, passive (cost effective) and high-speed (i.e., include significant inertial effects). This paper presents a dynamic synthesis approach of gravity fed parts-orienters. In general, previous works were constrained by their quasi-static analyses. This research demonstrates the synthesis for dynamic parts-orienters based on the mechanics of the system using a simulation package as a design tool. The dynamic effects considered by this work include friction, inertial forces, impact with friction and contact/no-contact (changing kinematic constraints). The passive part orientation systems, which are developed by dynamic system synthesis in the presence of friction and impact, succeed in aligning a part into a specified orientation and through experiment are shown to be valid. This paper presents and experimentally validates a synthesis approach for dynamic mechanical systems with changing kinematic constraints. The experimental validation uses high speed video.

The Radio Probe™: A New Measurement Tool for High Speed Integrated Circuits

2005 ◽  
Author(s):  
Mark Kimball
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
High Speed ◽  
Attenuation Factor ◽  
Cost Effective ◽  
Frequency Measurement ◽  
Single Frequency ◽  
Measurement Tool ◽  
Probe Design ◽  
Differential Measurement

Abstract This article presents a novel tool designed to allow circuit node measurements in a radio frequency (RF) integrated circuit. The discussion covers RF circuit problems; provides details on the Radio Probe design, which achieves an input impedance of 50Kohms and an overall attenuation factor of 0 dB; and describes signal to noise issues in the output signal, along with their improvement techniques. This cost-effective solution incorporates features that make it well suited to the task of differential measurement of circuit nodes within an RF IC. The Radio Probe concept offers a number of advantages compared to active probes. It is a single frequency measurement tool, so it complements, rather than replaces, active probes.

Design and Implementation of an Efficient Parallel LFSR Architecture for Wireless Communication Systems

2019 ◽  
Vol 14 ◽  
Author(s):  
A. Suresh Babu ◽  
B. Anand
Keyword(s):  
Wireless Communication ◽  
Power Consumption ◽  
Low Power ◽  
Communication Systems ◽  
High Speed ◽  
Design Tool ◽  
Shift Register ◽  
Linear Feedback ◽  
Wireless Communication Systems ◽  
Coverage Area

: A Linear Feedback Shift Register (LFSR) considers a linear function typically an XOR operation of the previous state as an input to the current state. This paper describes in detail the recent Wireless Communication Systems (WCS) and techniques related to LFSR. Cryptographic methods and reconfigurable computing are two different applications used in the proposed shift register with improved speed and decreased power consumption. Comparing with the existing individual applications, the proposed shift register obtained >15 to <=45% of decreased power consumption with 30% of reduced coverage area. Hence this proposed low power high speed LFSR design suits for various low power high speed applications, for example wireless communication. The entire design architecture is simulated and verified in VHDL language. To synthesis a standard cell library of 0.7um CMOS is used. A custom design tool has been developed for measuring the power. From the results, it is obtained that the cryptographic efficiency is improved regarding time and complexity comparing with the existing algorithms. Hence, the proposed LFSR architecture can be used for any wireless applications due to parallel processing, multiple access and cryptographic methods.

scholarly journals 2D-3D integration of hexagonal boron nitride and a high-κ dielectric for ultrafast graphene-based electro-absorption modulators

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Hitesh Agarwal ◽  
Bernat Terrés ◽  
Lorenzo Orsini ◽  
Alberto Montanaro ◽  
Vito Sorianello ◽  
...  
Keyword(s):  
Boron Nitride ◽  
Hafnium Oxide ◽  
High Speed ◽  
Hexagonal Boron Nitride ◽  
Temperature Stability ◽  
Cost Effective ◽  
Fold Increase ◽  
Building Blocks ◽  
High Quality ◽  
New Device

AbstractElectro-absorption (EA) waveguide-coupled modulators are essential building blocks for on-chip optical communications. Compared to state-of-the-art silicon (Si) devices, graphene-based EA modulators promise smaller footprints, larger temperature stability, cost-effective integration and high speeds. However, combining high speed and large modulation efficiencies in a single graphene-based device has remained elusive so far. In this work, we overcome this fundamental trade-off by demonstrating the 2D-3D dielectric integration in a high-quality encapsulated graphene device. We integrated hafnium oxide (HfO2) and two-dimensional hexagonal boron nitride (hBN) within the insulating section of a double-layer (DL) graphene EA modulator. This combination of materials allows for a high-quality modulator device with high performances: a ~39 GHz bandwidth (BW) with a three-fold increase in modulation efficiency compared to previously reported high-speed modulators. This 2D-3D dielectric integration paves the way to a plethora of electronic and opto-electronic devices with enhanced performance and stability, while expanding the freedom for new device designs.

scholarly journals Offretite Zeolite Single Crystals Synthesized by Amphiphile-Templating Approach

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2238
Author(s):  
Eng-Poh Ng ◽  
Nur Hidayahni Ahmad ◽  
Fitri Khoerunnisa ◽  
Svetlana Mintova ◽  
Tau Chuan Ling ◽  
...  
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
Cost Effective ◽  
Acid Sites ◽  
Biofuel Production ◽  
Structure Directing Agent ◽  
High Crystallinity ◽  
Organic Templates ◽  
Synthesis Approach ◽  
Conventional Counterpart ◽  
Dual Functions

Offretite zeolite synthesis in the presence of cetyltrimethylammonium bromide (CTABr) is reported. The offretite crystals were synthesized with a high crystallinity and hexagonal prismatic shape after only 72 h of hydrothermal treatment at 180 °C. The CTABr has dual-functions during the crystallization of offretite, viz. as structure-directing agent and as mesoporogen. The resulting offretite crystals, with a Si/Al ratio of 4.1, possess more acid sites than the conventional offretite due to their high crystallinity and hierarchical structure. The synthesized offretite is also more reactive than its conventional counterpart in the acylation of 2-methylfuran for biofuel production under non-microwave instant heating condition, giving 83.5% conversion with 100% selectivity to the desired product 2-acetyl-5-methylfuran. Hence, this amphiphile synthesis approach offers another cost-effective and alternative route for crystallizing zeolite materials that require expensive organic templates.

scholarly journals Scale-Up Preparation of Crocins I and II from Gardeniajasminoides by a Two-Step Chromatographic Approach and Their Inhibitory Activity Against ATP Citrate Lyase

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3137
Author(s):  
Shuguang Guan ◽  
Qiaoli Pu ◽  
Yinan Liu ◽  
Honghong Wu ◽  
Wenbo Yu ◽  
...  
Keyword(s):  
Inhibitory Activity ◽  
High Speed ◽  
Scale Up ◽  
Cost Effective ◽  
Atp Citrate Lyase ◽  
Gardenia Jasminoides ◽  
Citrate Lyase ◽  
Human Disorders ◽  
Ic50 Values ◽  
Counter Current

Crocins are highly valuable natural compounds for treating human disorders, and they are also high-end spices and colorants in the food industry. Due to the limitation of obtaining this type of highly polar compound, the commercial prices of crocins I and II are expensive. In this study, macroporous resin column chromatography combined with high-speed counter-current chromatography (HSCCC) was used to purify crocins I and II from natural sources. With only two chromatographic steps, both compounds were simultaneously isolated from the dry fruit of Gardenia jasminoides, which is a cheap herbal medicine distributed in a number of countries. In an effort to shorten the isolation time and reduce solvent usage, forward and reverse rotations were successively utilized in the HSCCC isolation procedure. Crocins I and II were simultaneously obtained from a herbal resource with high recoveries of 0.5% and 0.1%, respectively, and high purities of 98.7% and 99.1%, respectively, by HPLC analysis. The optimized preparation method was proven to be highly efficient, convenient, and cost-effective. Crocins I and II exhibited inhibitory activity against ATP citrate lyase, and their IC50 values were determined to be 36.3 ± 6.24 and 29.7 ± 7.41 μM, respectively.

Narrowing longitudinally coupled prefabricated slab track maintenance duration with field data analysis of slab deformation under high temperature

2021 ◽  
pp. 095440972098626
Author(s):  
Zai-Wei Li ◽  
Xiao-Zhou Liu ◽  
Hong-Yao Lu ◽  
Yue-Lei He
Keyword(s):  
High Temperature ◽  
High Speed ◽  
Ride Comfort ◽  
Cost Effective ◽  
Periodic Variation ◽  
Longitudinal Force ◽  
Distribution Analysis ◽  
High Speed Rail ◽  
Track Maintenance ◽  
Slab Track

The deformation of longitudinally coupled prefabricated slab track (LCPST) due to high temperature may lead to a reduction in ride comfort and safety in high-speed rail (HSR) operation. It is thus critical to understand and track the development of such defects. This study develops an online monitoring system to analyze LCPST deformation at different slab depths under various temperatures. The trackside system, powered by solar energy with STM8L core that is ultra-low in energy consumption, is used to collect data of LCPST deformation and temperature level uninterruptedly. With canonical correlation analysis, it is found that LCPST deformation presents similar periodic variation to yearly temperature fluctuation and large longitudinal force may be generated as heat accumulates in summer, thereby causing track defects. Then the distribution of temperature and deformation data is categorized based on fuzzy c-means clustering. Through the distribution analysis, it is suggested that slab inspection can be shortened to 6 hours, i.e. from 10:00 am to 4:00 pm, reducing 14.3% track inspection workload from the current practice. The price of workload reduction is only a 2% chance of missed detection of slab deformation. The finding of this research can be used to enhance LCPST monitoring efficiency and reduce interruption to HSR operation, which is an essential step in promoting reliable and cost-effective track service.

Adaptive Network Coded Clouds: High Speed Downloads and Cost-Effective Version Control

2019 ◽  
Vol 7 (1) ◽  
pp. 19-33 ◽  
Author(s):  
Marton Sipos ◽  
Janus Heide ◽  
Daniel E. Lucani ◽  
Morten V. Pedersen ◽  
Frank H.P. Fitzek ◽  
...  
Keyword(s):  
High Speed ◽  
Cost Effective ◽  
Version Control ◽  
Adaptive Network ◽  
Effective Version

Control of a lamination process

2005 ◽  
Vol 219 (1) ◽  
pp. 69-81 ◽  
Author(s):  
R Whalley ◽  
M Ebrahimi
Keyword(s):  
High Speed ◽  
Closed Loop ◽  
Cost Effective ◽  
Closed Loop System ◽  
Design Validation ◽  
Control Effort ◽  
Speed Of Response ◽  
Feedback Compensation ◽  
Lamination Process ◽  
Compensation Design

A high-speed laminating machine for a fabric coating and conversion process is considered. Following analysis procedures, state-space and the admittance transfer function descriptions for the system are derived. Regulation of the fabric tension owing to heat shrinkage and environmental and coating variations is necessary. An optimum, minimum control effort strategy is proposed, enabling simple cost effective regulation, without the use of active elements. The speed of response of the system is improved by the use of feedback compensation. Design validation, via simulation, obtaining the open- and closed-loop system responses is employed, demonstrating the achievement of smooth, almost monotonic variations in tension following reference changes, as specified.

Sign in / Sign up

Export Citation Format

Share Document