Influence of Flame Front Instability on Flame Propagation Behavior

Author(s):  
Kenji Mukaiyama ◽  
Kazunori Kuwana

This paper discusses flame acceleration due to flame instability mechanisms. In particular, the diffusive-thermal instability and hydrodynamic instability mechanisms are considered. The Sivashinsky equation is used to compute two-dimensional flame propagation behaviors, and the influence of each instability mechanism is separately considered. The effect of flame size on flame speed (accelerated due to the instability mechanisms) is particularly investigated. It is found that the flame propagation velocity (Vf) is independent of flame size under the influence of diffusive-thermal instability, whereas Vf increases with flame size under the influence of hydrodynamic instability. The fractal nature of the flame under the influence of hydrodynamic instability is confirmed based on the dependence of Vf on flame size. Fractal dimension is then calculated as a function of volume expansion ratio, the parameter that controls the hydrodynamic instability mechanism. An FFT analysis is conducted to further understand the flame’s fractal structure.

2017 ◽  
Author(s):  
◽  
Rawan Alkandari ◽  

Premixed flame acceleration in channels or pipes has various practical applications, starting with fire safety problems and ending with advanced technologies such as pulse-detonation engines. In particular, a flame accelerates extremely fast when propagating through a comb-shaped array of narrow, tightly-spaced obstacles in a so-called "Bychkov tube". In the present thesis, the role of boundary conditions in such geometry is studied by means of the comprehensive computational simulations of combustion equations, with a fully-compressible hydrodynamics and an Arrhenius chemical kinetics. Specifically, the mechanistic (slip/nonslip) and thermal (adiabatic/isothermal) conditions at the walls/obstacles' surfaces, as well as the boundaries at the conduits' extremes (open/closed) are considered. The parametric study includes: the thermal expansion ratio in the range 5≤theta≤10; the wall temperature Tw being 298K≤Tw≤1000K; the pipe radius R exceeding the thermal flame thickness Lƒ by a factor of 12~48; the obstacles blockage ratio in the range 1/3≤alpha≤2/3; and the spacing between the obstacles Deltaz being 0.25R≤Deltaz≤2R.;It is shown that the impacts of both mechanistic and thermal surface conditions on flame propagation are minor and can be omitted. This is because the flame dynamics if mainly driven by flame spreading in an unobstructed portion of an obstructed pipe, i.e. far from the walls. With a fact that real walls are neither slip nor nonslip; neither adiabatic nor isothermal, but in between these categories, the minor role of surface conditions, identified here, validates the Bychkov model, which employs a number of simplifying assumptions, including slip and adiabatic surfaces.;In contrast, the role of the conditions at a pipe extreme is shown to be substantial. While in a semi-open pipe (one end is closed; a flame is ignited at this end and propagates towards the open end), the entire flame-generated jet-flow is pushed towards a single exit, in a pipe with two ends open, this flow is distributed between the upstream and downstream flows, thereby moderating flame propagation. As a result, in this geometry, a flame either accelerates much weaker (in a relatively wide pipe), with a possibility of blowout, or oscillates (in a narrow pipe). The oscillations appear nonlinear in all the situations when they are observed, and the present thesis quantifies the oscillation period and amplitude as well as the average flame velocity in the theta- Tw-alpha-Deltaz-R space.;Since these flame oscillations can be treated as fluctuations around a quasi-steady solution, the present thesis qualitatively supports the recent experiments, modeling and theory of flames in obstructed pipes with both ends open, which all yielded steady or quasi-steady flame propagation prior to an onset of spontaneous flame acceleration and deflagration-to-detonation transition.


1998 ◽  
Vol 120 (1) ◽  
pp. 174-182 ◽  
Author(s):  
H. S. Lee ◽  
H. Merte

An explosive type of vapor bubble growth was observed during pool boiling experiments in microgravity using R-113. Photographs reveal that the liquid-vapor interface of the explosive bubbles are wrinkled and corrugated, leading to the conclusion that some type of instability mechanism is acting. The classical hydrodynamic instability theories of Landau and Rayleigh-Taylor do not consider the effect of heat transfer, at the interface, which is believed to be responsible for the observed instability of the evaporating surface. This was confirmed by the mechanisms proposed by Prosperetti and Plesset, combined with a model of the early growth of spherical vapor bubbles.


Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2496 ◽  
Author(s):  
Yimin Zhang ◽  
Yan Wang ◽  
Ligang Zheng ◽  
Tao Yang ◽  
Jianliang Gao ◽  
...  

In this study, pristine palygorskite powders were used as the inhibition materials to suppress the explosion of methane-air premixed gas for the first time. The composition, porosity and pyrolysis characteristics of the powders were tested by X-ray diffraction (XRD), energy dispersive spectrometry (EDS), N2 adsorption-desorption and Thermogravimetry-differential scanning calorimetry (TG-DSC) techniques. The effects of pristine palygorskite powders concentration on the explosion pressure and the average velocity of flame propagation of the 9.5% methane-air premixed gas were tested by a 20 L spherical explosion system and a 5 L pipeline explosion system. The results indicated the pristine palygorskite powders possess a considerable suppression property on methane explosion. When the mass concentration of pristine palygorskite powders was 0.20 g·L−1, the max-pressure of methane explosion was decreased by 23.9%. The methane explosion flame propagation velocity was inhibited obviously. Owing to the excellent inhibitory performance and the advantage of low-cost and environmental harmlessness, pristine palygorskite powders are potential new materials for the application on gas explosion suppression.


2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Jianzhong Li ◽  
Kaichen Zhang ◽  
Wei Li ◽  
Li Yuan

A simplified single channel wave rotor combustor (WRC) experimental rig was established, in which the spoilers with different blockage ratios (BR) could be conveniently installed and disassembled. The spoilers were firstly used for WRC to improve the pressure rise. The effects of different blockage ratios on the pressure rise and flame acceleration characteristics in a single channel of the WRC were investigated. The addition of spoilers could remarkably improve the pressure rise and flame propagation speed in a single channel of the WRC. While the blockage ratio of the spoiler increases, both pressure rise and mean flame propagation speed are improved. When the spoilers with a blockage ratio of 38.91% are used, the peak pressure increases by 200% compared to that of WRC without the spoilers. When the spoilers of different blockage ratios (23.35%, 31.13%, and 38.91%) are used, it is found that the flame propagation speed is significantly improved with the increasing of the blockage ratio. Specifically, the maximum flame propagation speed reaches 55 m/s, and the maximum mean flame propagation speed is 36.95 m/s. Furthermore, combustion becomes more intense, and the flame is brighter around the spoiler.


Sign in / Sign up

Export Citation Format

Share Document