Fuel Gas Cleanup Parameters in Air-Blown IGCC

1999 ◽  
Vol 122 (2) ◽  
pp. 247-254 ◽  
Author(s):  
Richard A. Newby ◽  
Wen-Ching Yang ◽  
Ronald L. Bannister
Keyword(s):  
Power Plant ◽  
Sulfur Removal ◽  
Combined Cycle ◽  
Ammonia Content ◽  
Fuel Gas ◽  
Heating Value ◽  
Fluid Bed ◽  
Overall Performance ◽  
Hot Fuel Gas Desulfurization ◽  
Removal Technique

Fuel gas cleanup processing significantly influences overall performance and cost of IGCC power generation. The raw fuel gas properties (heating value, sulfur content, alkali content, ammonia content, “tar” content, particulate content) and the fuel gas cleanup requirements (environmental and turbine protection) are key process parameters. Several IGCC power plant configurations and fuel gas cleanup technologies are being demonstrated or are under development. In this evaluation, air-blown, fluidized-bed gasification combined-cycle power plant thermal performance is estimated as a function of fuel type (coal and biomass fuels), extent of sulfur removal required, and the sulfur removal technique. Desulfurization in the fluid bed gasifier is combined with external hot fuel gas desulfurization, or, alternatively with conventional cold fuel gas desulfurization. The power plant simulations are built around the Siemens Westinghouse 501F combustion turbine in this evaluation. [S0742-4795(00)00502-0]

scholarly journals Fuel Gas Cleanup Parameters in Air-Blown IGCC

1998 ◽  
Author(s):  
Richard A. Newby ◽  
Wen-Ching Yang ◽  
Ronald L. Bannister
Keyword(s):  
Power Plant ◽  
Sulfur Removal ◽  
Combined Cycle ◽  
Fuel Type ◽  
Ammonia Content ◽  
Fuel Gas ◽  
Fluid Bed ◽  
Overall Performance ◽  
Hot Fuel Gas Desulfurization ◽  
Removal Technique

Fuel gas cleanup processing significantly influences overall performance and cost of IGCC power generation. The raw fuel gas properties (hearing value, sulfur content, alkali content, ammonia content, “tar” content, particulate content) and the fuel gas cleanup requirements (environmental and turbine protection) are key process parameters. Several IGCC power plant configurations and fuel gas cleanup technologies are being demonstrated or are under development. In this evaluation, air-blown, fluidized-bed gasification combined-cycle power plant thermal performance is estimated as a function of fuel type (coal and biomass fuels), extent of sulfur removal required, and the sulfur removal technique. Desulfurization in the fluid bed gasifier is combined with external hot fuel gas desulfurization, or, alternatively with conventional cold fuel gas desulfurization. The power plant simulations are built around the Westinghouse 501F combustion turbine in this evaluation.

Overall Performance of Advanced H2/Air Cycle Power Plants Based on Coal Decarbonisation

2005 ◽  
Author(s):  
M. Gambini ◽  
M. Vellini
Keyword(s):  
Power Plant ◽  
Hydrogen Production ◽  
Power Plants ◽  
Coal Gasification ◽  
Combined Cycle ◽  
Fuel Gas ◽  
Production Section ◽  
Pinch Technology ◽  
Energy Economy ◽  
Overall Performance

In this paper the overall performance of a new advanced mixed cycle (AMC), fed by hydrogen-rich fuel gas, has been evaluated. Obviously, hydrogen must be produced and here we have chosen the coal gasification for its production, quantifying all the thermal and electric requirements. At first, a simple combination between hydrogen production section and power section is performed. In fact, the heat loads of the first section can be satisfied by using the various raw syngas cooling, without using some material streams taken from the power section, but also without using part of heat, available in the production section and rejected into the environment, in the power section. The final result is very poor: over 34%. Then, by using the Pinch Technology, a more efficient, even if more complex, solution can be conceived: in this case the overall efficiency is very interesting: 39%. These results are very similar to those of a combined cycle power plant, equipped with the same systems and analyzed under the same hypotheses. The final result is very important because the “clean” use of coal in new power plant types must be properly investigated: in fact coal is the most abundant and the cheapest fossil fuel available on earth; moreover, hydrogen production, by using coal, is an interesting outlook because hydrogen has the potential to become the main energy carrier in a future sustainable energy economy.

scholarly journals Study on effective parameter of the triple-pressure reheat combined cycle performance

2013 ◽  
Vol 17 (2) ◽  
pp. 497-508 ◽  
Author(s):  
Thamir Ibrahim ◽  
M.M. Rahman
Keyword(s):  
Power Plant ◽  
Ambient Temperature ◽  
Compression Ratio ◽  
Combined Cycle ◽  
Total Power ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Overall Performance ◽  
Overall Efficiency

The thermodynamic analyses of the triple-pressure reheat combined cycle gas turbines with duct burner are presented and discussed in this paper. The overall performance of a combined cycle gas turbine power plant is influenced by the ambient temperature, compression ratio and turbine inlet temperature. These parameters affect the overall thermal efficiency, power output and the heat-rate. In this study a thermodynamic model was development on an existing actual combined cycle gas turbine (CCGT) (In this case study, an effort has been made to enhance the performance of the CCGT through a parametric study using a thermodynamic analysis. The effect of ambient temperature and operation parameter, including compression ratio and turbine inlet temperature, on the overall performance of CCGT are investigated. The code of the performance model for CCGT power plant was developed utilizing the THERMOFLEX software. The simulating results show that the total power output and overall efficiency of a CCGT decrease with increase the ambient temperature because increase the consumption power in the air compressor of a GT. The totals power of a CCGT decreases with increase the compression rate, while the overall efficiency of a CCGT increases with increase the compression ratio to 21, after that the overall efficiency will go down. Far there more the turbine inlet temperature increases the both total power and overall efficiency increase, so the turbine inlet temperature has a strong effect on the overall performance of CCGT power plant. Also the simulation model give a good result compared with MARAFIQ CCGT power plant. With these variables, the turbine inlet temperature causes the greatest overall performance variation.

Effect of Fuel Gas Cleanup Option on Air-Blown IGCC Power Plant Performance

1997 ◽  
Author(s):  
W. C. Yang ◽  
R. A. Newby ◽  
R. L. Bannister
Keyword(s):  
Power Plant ◽  
Process Model ◽  
Coal Gasification ◽  
Heat Rate ◽  
Combined Cycle ◽  
Plant Performance ◽  
Fuel Gas ◽  
Gas Cleaning ◽  
Plant Sensitivity ◽  
Parametric Studies

Air-blown coal gasification for combined-cycle power generation is a technology soon to be demonstrated. A process evaluation of air-blown IGCC performed to estimate the plant heat rate, electrical output and potential emissions are described in this paper. A process model of an air-blown IGCC power system based on the Westinghouse 501F combustion turbine was developed to conduct the performance evaluation. Parametric studies were performed to develop an understanding of the power plant sensitivity to the major operating parameters and process options. Advanced hot fuel gas cleaning and conventional cold fuel gas cleaning options were both considered.

A Combined Cycle Power Generation/Alfalfa Processing System: Part 1 — Development and Testing

1998 ◽  
Author(s):  
John S. Brushwood ◽  
Ken Campbell ◽  
C. V. Hanson ◽  
Andras Horvath ◽  
Thomas Vivenzio
Keyword(s):  
Power Plant ◽  
Processing System ◽  
Combined Cycle ◽  
Department Of Energy ◽  
University Of Minnesota ◽  
Project Development ◽  
Fuel Gas ◽  
Combined Cycle Power Plant ◽  
Exhaust Heat ◽  
System Part

The Minnesota Valley Alfalfa Producers (MnVAP), a farmer owned cooperative, is developing a 75 MW combined cycle power plant integrated with alfalfa processiag facilities in southwestern Minnesota. The Minnesota Agri-Power (MAP) project is supported by the U. S. Department of Energy and a project development team that includes Stone & Webster, the University of Minnesota, United Power Association, Carbona Corporation/Kvaerner Pulping Inc. and Westinghouse. Alfalfa processing facilities separate the fibrous stem material from the protein-rich leaf fraction. The resulting alfalfa leaf meal (ALM) is further processed into a variety of valuable livestock feed products. Alfalfa stem material is gasified using air-blown fluidized bed technology to produce a hot, clean, fuel gas. The fuel gas is fired in a combustion turbine and the exhaust heat is used to produce steam to power a steam turbine. At base load, the electric power plant will consume 1000 tons per day of biomass fuel. This paper briefly describes the project development activities of the alfalfa feed trials and the combined cycle power plant. This commercial scale demonstration represents an important milestone on a continuing pathway towards environmentally and economically sustainable energy systems.

scholarly journals Diagnosing the Sources of Overall Performance Deterioration in CCGT Plants

1999 ◽  
Author(s):  
K. Mathioudakis ◽  
A. Stamatis ◽  
E. Bonataki
Keyword(s):  
Power Plant ◽  
Measurement Uncertainty ◽  
Gas Turbine ◽  
Power Output ◽  
Additional Data ◽  
Combined Cycle ◽  
Performance Deterioration ◽  
Overall Performance ◽  
Improve Reliability

A method for diagnosing which parts of a Combined Cycle Gas Turbine (CCGT) power plant are responsible for performance deviations is presented. When the overall power output and efficiency deviate from their baseline value, application of the method allows the determination of the component(s) of the plant, responsible for this deviation. The level of depth of this assessment depends on the number of quantities measured. It is demonstrated that a minimal number of measurements can be used to allocate differences between the gas turbine and the steam part of the plant. Additional data can then be used to identify deviating components in more detail. The influence of measurement uncertainty and the exploitation of different measurements in order to check consistency and improve reliability of the results are discussed.

Flue Gas Recirculation in a Gas Turbine: Impact on Performance and Operational Behavior

2011 ◽  
Author(s):  
Frank Sander ◽  
Richard Carroni ◽  
Stefan Rofka ◽  
Eribert Benz
Keyword(s):  
Power Plant ◽  
Co2 Capture ◽  
Flue Gas ◽  
Power Plants ◽  
Combustion Process ◽  
Combined Cycle ◽  
Flue Gas Recirculation ◽  
Overall Performance ◽  
Gas Recirculation ◽  
The Impact

The rigorous reduction of greenhouse gas emissions in the upcoming decades is only achievable with contribution from the following strategies: production efficiency, demand reduction of energy and carbon dioxide (CO2) capture from fossil fueled power plants. Since fossil fueled power plants contribute largely to the overall global greenhouse gas emissions (> 25% [1]), it is worthwhile to capture and store the produced CO2 from those power generation processes. For natural-gas-fired power plants, post-combustion CO2 capture is the most mature technology for low emissions power plants. The capture of CO2 is achieved by chemical absorption of CO2 from the exhaust gas of the power plant. Compared to coal fired power plants, an advantage of applying CO2 capture to a natural-gas-fired combined cycle power plant (CCPP) is that the reference cycle (without CO2 capture) achieves a high net efficiency. This far outweighs the drawback of the lower CO2 concentration in the exhaust. Flue Gas Recirculation (FGR) means that flue gas after the HRSG is partially cooled down and then fed back to the GT intake. In this context FGR is beneficial because the concentration of CO2 can be significantly increased, the volumetric flow to the CO2 capture unit will be reduced, and the overall performance of the CCPP with CO2 capture is increased. In this work the impact of FGR on both the Gas Turbine (GT) and the Combined Cycle Power Plant (CCPP) is investigated and analyzed. In addition, the impact of FGR for a CCPP with and without CO2 capture is investigated. The fraction of flue gas that is recirculated back to the GT, need further to be cooled, before it is mixed with ambient air. Sensitivity studies on flue gas recirculation ratio and temperature are conducted. Both parameters affect the GT with respect to change in composition of working fluid, the relative humidity at the compressor inlet, and the impact on overall performance on both GT and CCPP. The conditions at the inlet of the compressor also determine how the GT and water/steam cycle are impacted separately due to FGR. For the combustion system the air/fuel-ratio (AFR) is an important parameter to show the impact of FGR on the combustion process. The AFR indicates how close the combustion process operates to stoichiometric (or technical) limit for complete combustion. The lower the AFR, the closer operates the combustion process to the stoichiometric limit. Furthermore, the impact on existing operational limitations and the operational behavior in general are investigated and discussed in context of an operation concept for a GT with FGR.

scholarly journals Reliability enhancement of LNG fuel gas supply system in combined-cycle power plant

2020 ◽  
Vol 6 ◽  
pp. 929-933
Author(s):  
Teerawat Thepmanee ◽  
Chakri Nachasingha ◽  
Sart Kummool
Keyword(s):  
Power Plant ◽  
Supply System ◽  
Combined Cycle ◽  
Fuel Gas ◽  
Combined Cycle Power Plant ◽  
Reliability Enhancement ◽  
Lng Fuel ◽  
Gas Supply
Sign in / Sign up

Export Citation Format

Share Document