A New Method for Calculating the Inflection Point Temperature of Heavy-Oil Rheology Transforming from Non-Newton Fluid into the Newton Fluid

2021 ◽  
pp. 1-16
Author(s):  
Dong Liu ◽  
Yonghui Liu ◽  
Nanjun Lai ◽  
Youjun Ji ◽  
TingHui Hu
Keyword(s):  
Newtonian Fluid ◽  
Heavy Oil ◽  
Inflection Point ◽  
High Viscosity ◽  
Current Approach ◽  
Temperature Data ◽  
New Method ◽  
Good Correspondence ◽  
Point Temperature ◽  
Shengli Oilfield

Abstract The inflection point temperature of rheology (IPTR) of heavy oil transforming from a non-Newtonian fluid into a Newtonian fluid is a key parameter in the steam huff- and-puff process. It is particularly relevant in terms of optimizing injection parameters, calculating the heating radius, and determining well spaces. However, the current approach exhibits obvious shortcomings, such as the randomness of the selected tangent line and inadaptability for extra-heavy oil with high viscosity. Therefore, this paper presents a novel method for calculating IPTR using viscosity–temperature data. The approach is based on the Arrhenius equation and quantitatively evaluates the IPTR according to the inflection point of the apparent activation energy. The IPTR values of four heavy-oil samples obtained from the Bohai Oilfield in China were quantitatively predicted according to viscosity–temperature data using the proposed method. The method's accuracy was verified by a series of rheological investigations on samples obtained from two heavy-oil wells. Additionally, the new method was used to predict IPTR according to the published viscosity–temperature data of 10 heavy-oil samples from the Shengli Oilfield. Again, a good correspondence was found, and mean absolute and relative errors of 3°C and 4.6%, respectively, were reported. Therefore, the proposed model was confirmed to improve the prediction accuracy of the existing method, and provided a new method for calculating the IPTR of heavy-oil.

Estimation of Catchabilities and Population Sizes of Lobsters

1963 ◽  
Vol 20 (1) ◽  
pp. 59-88 ◽  
Author(s):  
J. E. Paloheimo
Keyword(s):  
Environmental Factors ◽  
Population Size ◽  
Atlantic Coast ◽  
Temperature Data ◽  
New Method ◽  
Bottom Temperature ◽  
Population Size Estimates ◽  
Population Sizes ◽  
Estimate Population Size ◽  
Size Estimates

Techniques of estimating population size, level of fishing, and the degree of dependence of fishing success on environmental factors are examined on the basis of tagging, catch and effort data. A new method is developed to estimate population size from catch, effort, and temperature data when the catchability varies with temperature.The methods of estimation discussed are applied to data collected from a number of lobster fisheries on Canada's Atlantic coast. Analysis confirms a relationship between the catchability of lobsters and bottom temperature. Differences in this relationship are found between areas and between tagged and untagged lobsters within areas. It is suggested that these differences are attributable to the differences in densities as well as to aggregations of lobsters and fishing. The effect of these aggregations on population size estimates is considered.Calculated average catchabilities at comparable temperatures are different for different areas. These differences are correlated with the numbers of trap hauls per day per square miles fished. It is suggested that the differences in the catchabilities might be due to interactions between units of gear not predicted by the customary relationship between catch and effort.

Experimental Study and Modeling of Heating Effect in Electrical Submersible Pump Operating With Ultra-Heavy Oil

2018 ◽  
Author(s):  
Jorge Luiz Biazussi ◽  
Cristhian Porcel Estrada ◽  
William Monte Verde ◽  
Antonio Carlos Bannwart ◽  
Valdir Estevam ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Critical Factor ◽  
High Viscosity ◽  
Inlet Temperature ◽  
Outlet Temperature ◽  
Heating Effect ◽  
Submersible Pump ◽  
Oil Viscosity ◽  
Artificial Lift ◽  
Electrical Submersible Pump

A notable trend in the realm of oil production in harsh environments is the increasing use of Electrical Submersible Pump (ESP) systems. ESPs have even been used as an artificial-lift method for extracting high-viscosity oils in deep offshore fields. As a way of reducing workover costs, an ESP system may be installed at the well bottom or on the seabed. A critical factor, however, in deep-water production is the low temperature at the seabed. In fact, these low temperatures constitute the main source for many flow-assurance problems, such as the increase in friction losses due to high viscosity. Oil viscosity impacts pump performance, reducing the head and increasing the shaft power. This study investigates the influence of a temperature increase of ultra-heavy oil on ESP performance and the heating effect through a 10-stage ESP. Using several flow rates, tests are performed at four rotational speeds and with four viscosity levels. At each rotational speed curve, researchers keep constant the inlet temperature and viscosity. The study compares the resulting data with a simple heat model developed to estimate the oil outlet temperature as functions of ESP performance parameters. The experimental data is represented by a one-dimensional model that also simulates a 100-stage ESP. The simulations demonstrate that as the oil heat flows through the pump, the pump’s efficiency increases.

A New Approach Utilizing Liquid Catalyst for Improving Heavy Oil Recovery

2021 ◽  
Vol 143 (7) ◽  
Author(s):  
Ali Alarbah ◽  
Ezeddin Shirif ◽  
Na Jia ◽  
Hamdi Bumraiwha
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
High Viscosity ◽  
Heavy Oil Recovery ◽  
Oil Viscosity ◽  
Recovery Processes ◽  
Reduced Viscosity ◽  
Effective Form ◽  
Recovery Techniques ◽  
Original Oil In Place

Abstract Chemical-assisted enhanced oil recovery (EOR) has recently received a great deal of attention as a means of improving the efficiency of oil recovery processes. Producing heavy oil is technically difficult due to its high viscosity and high asphaltene content; therefore, novel recovery techniques are frequently tested and developed. This study contributes to general progress in this area by synthesizing an acidic Ni-Mo-based liquid catalyst (LC) and employing it to improve heavy oil recovery from sand-pack columns for the first time. To understand the mechanisms responsible for improved recovery, the effect of the LC on oil viscosity, density, interfacial tension (IFT), and saturates, aromatics, resin, and asphaltenes (SARA) were assessed. The results show that heavy oil treated with an acidic Ni-Mo-based LC has reduced viscosity and density and that the IFT of oil–water decreased by 7.69 mN/m, from 24.80 mN/m to 17.11 mN/m. These results are specific to the LC employed. The results also indicate that the presence of the LC partially upgrades the structure and group composition of the heavy oil, and sand-pack flooding results show that the LC increased the heavy oil recovery factor by 60.50% of the original oil in place (OOIP). Together, these findings demonstrate that acidic Ni-Mo-based LCs are an effective form of chemical-enhanced EOR and should be considered for wider testing and/or commercial use.

Indoor Study of Viscosity Reducer for Thickened Oil of Huancai

2012 ◽  
Vol 268-270 ◽  
pp. 547-550
Author(s):  
Qing Wang Liu ◽  
Xin Wang ◽  
Zhen Zhong Fan ◽  
Jiao Wang ◽  
Rui Gao ◽  
...  
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Heavy Oil ◽  
High Viscosity ◽  
Oil Field ◽  
Viscosity Reduction ◽  
Oil Viscosity ◽  
Low Viscosity ◽  
Viscosity Reducer ◽  
Oil Water

Liaohe oil field block 58 for Huancai, the efficiency of production of thickened oil is low, and the efficiency of displacement is worse, likely to cause other issues. Researching and developing an type of Heavy Oil Viscosity Reducer for exploiting. The high viscosity of W/O emulsion changed into low viscosity O/W emulsion to facilitate recovery, enhanced oil recovery. Through the experiment determine the viscosity properties of Heavy Oil Viscosity Reducer. The oil/water interfacial tension is lower than 0.0031mN•m-1, salt-resisting is good. The efficiency of viscosity reduction is higher than 90%, and also good at 180°C.

NEWTONIAN AND NON-NEWTONIAN BLOOD FLOW AT A 90∘-BIFURCATION OF THE CEREBRAL ARTERY: A COMPARATIVE STUDY OF FLUID VISCOSITY MODELS

2018 ◽  
Vol 18 (05) ◽  
pp. 1850043 ◽  
Author(s):  
S. V. FROLOV ◽  
S. V. SINDEEV ◽  
D. LIEPSCH ◽  
A. BALASSO ◽  
P. ARNOLD ◽  
...  
Keyword(s):  
Blood Flow ◽  
Newtonian Fluid ◽  
Flow Rate ◽  
Fluid Model ◽  
Cerebral Arteries ◽  
High Viscosity ◽  
Flow Rate Ratio ◽  
Parent Artery ◽  
Fluid Viscosity ◽  
Recirculating Flow

The majority of numerical simulations assumes blood as a Newtonian fluid due to an underestimation of the effect of non-Newtonian blood behavior on hemodynamics in the cerebral arteries. In the present study, we evaluated the effect of non-Newtonian blood properties on hemodynamics in the idealized 90[Formula: see text]-bifurcation model, using Newtonian and non-Newtonian fluids and different flow rate ratios between the parent artery and its branch. The proposed Local viscosity model was employed for high-precision representation of blood viscosity changes. The highest velocity differences were observed at zones with slow recirculating flow. During the systolic peak the average difference was 17–22%, whereas at the end of diastole the difference increased to 27–60% depending on the flow rate ratio. The main changes in the viscosity distribution were observed distal to the flow separation point, where the non-Newtonian fluid model produced 2.5 times higher viscosity. A presence of such high viscosity region substantially affected the size of the flow recirculation zone. The observed differences showed that non-Newtonian blood behavior had a significant effect on hemodynamic parameters and should be considered in the future studies of blood flow in cerebral arteries.

Incidence and Cumulative Incidence as Supplemental Measures of the Scale of Imprisonment

2017 ◽  
Vol 64 (7) ◽  
pp. 888-916 ◽  
Author(s):  
William Rhodes ◽  
Gerald G. Gaes ◽  
Jeremy Luallen ◽  
Ryan Kling ◽  
Tom Rich ◽  
...  
Keyword(s):  
Administrative Data ◽  
Cumulative Incidence ◽  
Inflection Point ◽  
Estimation Method ◽  
New Method ◽  
Blacks And Whites ◽  
Over Time

Prison growth has primarily been measured as a prevalence over time. We propose cohort-specific supplemental measures: incidence based on the age of first adult admission into prison, and cumulative incidence, based on the proportion of people who will be imprisoned during their lifetime. We present a new estimation method using administrative data. Prior research derived estimates from inmate surveys. The main advantages of this new method are that estimates can be updated every year with little cost and minimal imputation. We present results showing that we have likely reached an inflection point in the growth of cumulative incidence, and the ratio between Blacks and Whites is declining although the disparity is still large—roughly 4.5 to 1.

scholarly journals Influence of Oil Viscosity on Alkaline Flooding for Enhanced Heavy Oil Recovery

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Yong Du ◽  
Guicai Zhang ◽  
Jijiang Ge ◽  
Guanghui Li ◽  
Anzhou Feng
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
High Viscosity ◽  
Low Permeability ◽  
Oil Viscosity ◽  
Low Viscosity ◽  
Medium Permeability ◽  
Tertiary Oil Recovery ◽  
Different Temperatures ◽  
Water Drops

Oil viscosity was studied as an important factor for alkaline flooding based on the mechanism of “water drops” flow. Alkaline flooding for two oil samples with different viscosities but similar acid numbers was compared. Besides, series flooding tests for the same oil sample were conducted at different temperatures and permeabilities. The results of flooding tests indicated that a high tertiary oil recovery could be achieved only in the low-permeability (approximately 500 mD) sandpacks for the low-viscosity heavy oil (Zhuangxi, 390 mPa·s); however, the high-viscosity heavy oil (Chenzhuang, 3450 mPa·s) performed well in both the low- and medium-permeability (approximately 1000 mD) sandpacks. In addition, the results of flooding tests for the same oil at different temperatures also indicated that the oil viscosity put a similar effect on alkaline flooding. Therefore, oil with a high-viscosity is favorable for alkaline flooding. The microscopic flooding test indicated that the water drops produced during alkaline flooding for oils with different viscosities differed significantly in their sizes, which might influence the flow behaviors and therefore the sweep efficiencies of alkaline fluids. This study provides an evidence for the feasibility of the development of high-viscosity heavy oil using alkaline flooding.

Sign in / Sign up

Export Citation Format

Share Document