Early Dynamics of a Laser-induced Underwater Shock Wave

Author(s):  
Guihua Lai ◽  
Siyuan Geng ◽  
Hanwen Zheng ◽  
Zhifeng Yao ◽  
Qiang Zhong ◽  
...  

Abstract The objective of this paper is to observe and investigate the early evolution of the shock wave, induced by a nanosecond pulsed laser in still water. A numerical method is performed to calculate the propagation of the shock wave within 1µs, after optical breakdown, based on the Gilmore model and the Kirkwood-Bethe hypothesis. The input parameters of the numerical method include the laser pulse duration, the size of the plasma and the maximally extended cavitation bubble, which are measured utilizing a high time-resolved shadowgraph system. The calculation results are verified by shock wave observation experiments at the cavitation bubble expansion stage. The relative errors of the radiuses and the velocity of the shock wave front, reach the maximum value of 45% at 5 ns after breakdown and decrease to less than 20% within 20 ns. The high attenuation characteristics of the shock wave after the optical breakdown, are predicted by the numerical method. The quick time and space evolution of the shock wave are carefully analyzed. The normalized shock wave width is found to be independent of the laser energy and duration, and the energy partitions ratio is around 2.0 using the nanosecond pulsed laser.

Author(s):  
Hongseok Choi ◽  
Xiaochun Li

In order to investigate and understand the complicated transient thermal phenomena in laser micro processing, it is essential to accurately measure time-resolved temperatures of the workpiece. Micro thin film thermocouples with a micrometer spatial and nanosecond temporal resolution were fabricated on electroplated nickel workpieces to measure transient surface temperatures in nanosecond pulsed laser micromachining by ablation. Transient temperatures were successfully measured, and the effect of laser energy fluences on the peak temperatures was experimentally investigated. This study demonstrates that the micro TFTCs can be useful in measuring the transient temperatures on the workpiece during laser micromachining, and the measured data can be utilized to validate and improve existing analytical and numerical models.


1985 ◽  
Vol 51 ◽  
Author(s):  
Kouichi Murakami ◽  
Hans C. Gerritsen ◽  
Hedser Van Brug ◽  
Fred Bijkerk ◽  
Frans W. Saris ◽  
...  

ABSTRACTWe report time-resolved X-ray absorption and extended X-ray absorption fine structure (EXAFS) measurements on amorphous silicon under nanosecond pulsed-laser irradiation. Each measurement was performed with one laser shot in the X-ray energy range from 90 to 300 eV. An X-ray absorption spectrum for induced liquid Si (liq*Si) was first observed above an energy density of 0.17 J/cm2. It differs significantly from the spectrum for amorphous Si and characteristically shows the disappearance of the Si-L(II,III) edge structure at around 100 eV. This phenomenon is interpreted in terms of a significant reduction in the 3s-like character of the unfilled part of the conduction band of liq*Si compared to that of amorphous Si. This is the first direct evidence that liq*Si has a metallic-like electronic structure. Timeresolved EXAFS results are also discussed briefly.


Sign in / Sign up

Export Citation Format

Share Document