scholarly journals Tribology of additive manufacturing: an editorial

2021 ◽  
pp. 1-5
Author(s):  
Yi Zhu ◽  
Bart Raeymaekers ◽  
Michael Khonsari
Keyword(s):  
Additive Manufacturing ◽  
Rapid Prototyping ◽  
Medical Devices ◽  
Complex Geometries ◽  
Traditional Methods ◽  
Rapid Fabrication ◽  
Direct Fabrication ◽  
Military Applications ◽  
Aerospace Medical ◽  
End Use

Abstract Additive manufacturing (AM) enables the rapid fabrication of parts with complex geometries that cannot be easily manufactured with traditional methods. While originally limited to rapid prototyping, recent advances in AM technology also enable direct fabrication of functional end-use parts in, e.g., aerospace, medical devices, and military applications.

Evaluation of Parts Produced by a Novel Additive Manufacturing Process

2013 ◽  
Vol 315 ◽  
pp. 63-67 ◽  
Author(s):  
Muhammad Fahad ◽  
Neil Hopkinson
Keyword(s):  
Additive Manufacturing ◽  
Rapid Prototyping ◽  
Manufacturing Process ◽  
High Speed ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Layer By Layer ◽  
Nylon 12 ◽  
Measuring Machine ◽  
End Use

Rapid prototyping refers to building three dimensional parts in a tool-less, layer by layer manner using the CAD geometry of the part. Additive Manufacturing (AM) is the name given to the application of rapid prototyping technologies to produce functional, end use items. Since AM is relatively new area of manufacturing processes, various processes are being developed and analyzed for their performance (mainly speed and accuracy). This paper deals with the design of a new benchmark part to analyze the flatness of parts produced on High Speed Sintering (HSS) which is a novel Additive Manufacturing process and is currently being developed at Loughborough University. The designed benchmark part comprised of various features such as cubes, holes, cylinders, spheres and cones on a flat base and the build material used for these parts was nylon 12 powder. Flatness and curvature of the base of these parts were measured using a coordinate measuring machine (CMM) and the results are discussed in relation to the operating parameters of the process.The result show changes in the flatness of part with the depth of part in the bed which is attributed to the thermal gradient within the build envelope during build.

Rapid Prototyping in Developing Process with CA Systems Application

2013 ◽  
Vol 464 ◽  
pp. 399-405 ◽  
Author(s):  
Ludmila Novakova-Marcincinova ◽  
Jozef Novak-Marcincin
Keyword(s):  
Additive Manufacturing ◽  
Product Development ◽  
Rapid Prototyping ◽  
Production Quality ◽  
Consumer Products ◽  
Fused Deposition Modelling ◽  
Automatic Production ◽  
Fused Deposition ◽  
Additive Manufacturing Technology ◽  
Aerospace Medical

Rapid Prototyping (RP) presents the automatic production of physical parts using by additive manufacturing technology. The start techniques for Rapid Prototyping became available in the late 1980s and were used to produce models and prototype parts. Today they are used for a much wider range of applications and are even used to manufacture production-quality parts in relatively small numbers. Rapid Prototyping is widely used in the automotive, aerospace, medical, and consumer products industries. In paper is presented process of design product development, product production and testing of products produced by Fused Deposition Modelling rapid prototyping technology.

scholarly journals MRI–Compatible Fluid-Powered Medical Devices

2013 ◽  
Vol 135 (06) ◽  
pp. S13-S16 ◽  
Author(s):  
Jun Ueda ◽  
David B. Comber ◽  
Jonathon Slightam ◽  
Melih Turkseven ◽  
Vito Gervasi ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Medical Devices ◽  
Imaging Techniques ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Recent Developments ◽  
Mri Environment ◽  
Magnetic Resonance Imaging Mri ◽  
End Use ◽  
Future Work

This article introduces recent developments and challenges related to magnetic resonance imaging (MRI)-compatible medical devices. Recent advances in fluid-powered medical devices are described, including a needle steering robot for neurosurgery and a haptic device for hemiplegia rehabilitation. Recent three-dimensional printing technologies for fabricating integrated fluid-powered robots are also reported. The use of additive manufacturing conjoined with modern digital imaging techniques allow for the customization of components, a trait that is generally needed in medical implants and devices. Furthermore, the materials that are available in additive processes allow for direct end-use production of customized components and devices. In addition, the polymer-based materials have an inherently low permeability, allowing for use in an MRI environment while not causing imaging interference. Presently, selective laser sintering (SLS), stereolithography, and extrusion processes illustrate and suggest that they offer the greatest promise in MRI compatible end-use components. Future work is aimed at using Additive Manufacturing (AM) to develop inherently safe, compact, MRI compatible medical devices.

scholarly journals Rapid fabrication of MOF-based mixed matrix membranes through digital light processing

2021 ◽  
Author(s):  
Alexey Pustovarenko ◽  
Beatriz Seoane ◽  
Edy Abou-Hamad ◽  
Helen E King ◽  
Bert Weckhuysen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Processing Speed ◽  
Mixed Matrix Membranes ◽  
Scientific Interest ◽  
Mixed Matrix ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Rapid Fabrication ◽  
Manufacturing Methods

3D printing, also known as additive manufacturing technology, has greatly expanded across multiple sectors of technology replacing classical manufacturing methods by combining processing speed and high precision. The scientific interest...

scholarly journals SURFACE ROUGHNESS CONSIDERATIONS IN DESIGN FOR ADDITIVE MANUFACTURING - A LITERATURE REVIEW

2021 ◽  
Vol 1 ◽  
pp. 2841-2850
Author(s):  
Didunoluwa Obilanade ◽  
Christo Dordlofva ◽  
Peter Törlind
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Literature Review ◽  
Future Research ◽  
Reduction Potentials ◽  
Research Fields ◽  
Post Process ◽  
Accessibility Issues ◽  
End Use ◽  
And Performance

AbstractOne often-cited benefit of using metal additive manufacturing (AM) is the possibility to design and produce complex geometries that suit the required function and performance of end-use parts. In this context, laser powder bed fusion (LPBF) is one suitable AM process. Due to accessibility issues and cost-reduction potentials, such ‘complex’ LPBF parts should utilise net-shape manufacturing with minimal use of post-process machining. The inherent surface roughness of LPBF could, however, impede part performance, especially from a structural perspective and in particular regarding fatigue. Engineers must therefore understand the influence of surface roughness on part performance and how to consider it during design. This paper presents a systematic literature review of research related to LPBF surface roughness. In general, research focuses on the relationship between surface roughness and LPBF build parameters, material properties, or post-processing. Research on design support on how to consider surface roughness during design for AM is however scarce. Future research on such supports is therefore important given the effects of surface roughness highlighted in other research fields.

Mechanical Response of Different Lattice Structures Fabricated Using the CLIP Technology

2016 ◽  
Author(s):  
Anil Saigal ◽  
John R. Tumbleston ◽  
Hendric Vogel
Keyword(s):  
Additive Manufacturing ◽  
Mechanical Response ◽  
Elastic Response ◽  
Lattice Structures ◽  
Rhombic Dodecahedron ◽  
Structured Materials ◽  
Specific Strength ◽  
Strain Behavior ◽  
End Use ◽  
Continuous Liquid Interface Production

In the rapidly growing field of additive manufacturing (AM), the focus in recent years has shifted from prototyping to manufacturing fully functional, ultralight, ultrastiff end-use parts. This research investigates the mechanical behavior of octahedral, octet, vertex centroid, dode, diamond, rhombi octahedron, rhombic dodecahedron and solid lattice structured polyacrylate fabricated using Continuous Liquid Interface Production (CLIP) technology based on 3D printing and additive manufacturing processes. The compressive stress-strain behavior of the lattice structures observed is typical of cellular structures which include a region of nominally elastic response, yielding, plastic strain hardening to a peak in strength, followed by a drop in flow stress to a plateau region and finally rapid hardening associated with contact of the deformed struts with each other as part of densification. It was found that the elastic modulus and strength of the various lattice structured materials are proportional to each other. In addition, it was found that the octahedral, octet and diamond lattice structures are amongst the most efficient based on the measured specific stiffness and specific strength.

scholarly journals An Optimization Workflow in Design for Additive Manufacturing

2021 ◽  
Vol 11 (6) ◽  
pp. 2572
Author(s):  
Stefano Rosso ◽  
Federico Uriati ◽  
Luca Grigolato ◽  
Roberto Meneghello ◽  
Gianmaria Concheri ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Structural Optimization ◽  
Geometric Model ◽  
Complex Geometries ◽  
Design Phase ◽  
Design For Additive Manufacturing ◽  
Engineering Software ◽  
Embodiment Design ◽  
Pros And Cons

Additive Manufacturing (AM) brought a revolution in parts design and production. It enables the possibility to obtain objects with complex geometries and to exploit structural optimization algorithms. Nevertheless, AM is far from being a mature technology and advances are still needed from different perspectives. Among these, the literature highlights the need of improving the frameworks that describe the design process and taking full advantage of the possibilities offered by AM. This work aims to propose a workflow for AM guiding the designer during the embodiment design phase, from the engineering requirements to the production of the final part. The main aspects are the optimization of the dimensions and the topology of the parts, to take into consideration functional and manufacturing requirements, and to validate the geometric model by computer-aided engineering software. Moreover, a case study dealing with the redesign of a piston rod is presented, in which the proposed workflow is adopted. Results show the effectiveness of the workflow when applied to cases in which structural optimization could bring an advantage in the design of a part and the pros and cons of the choices made during the design phases were highlighted.

scholarly journals Additive Manufacturing of Ti-Based Intermetallic Alloys: A Review and Conceptualization of a Next-Generation Machine

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4317
Author(s):  
Thywill Cephas Dzogbewu ◽  
Willie Bouwer du Preez
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Additive Manufacturing ◽  
Complex Geometries ◽  
Intermetallic Alloys ◽  
Tial Alloys ◽  
Conventional Methods ◽  
Manufacturing Technologies ◽  
In Situ Heat Treatment

TiAl-based intermetallic alloys have come to the fore as the preferred alloys for high-temperature applications. Conventional methods (casting, forging, sheet forming, extrusion, etc.) have been applied to produce TiAl intermetallic alloys. However, the inherent limitations of conventional methods do not permit the production of the TiAl alloys with intricate geometries. Additive manufacturing technologies such as electron beam melting (EBM) and laser powder bed fusion (LPBF), were used to produce TiAl alloys with complex geometries. EBM technology can produce crack-free TiAl components but lacks geometrical accuracy. LPBF technology has great geometrical precision that could be used to produce TiAl alloys with tailored complex geometries, but cannot produce crack-free TiAl components. To satisfy the current industrial requirement of producing crack-free TiAl alloys with tailored geometries, the paper proposes a new heating model for the LPBF manufacturing process. The model could maintain even temperature between the solidified and subsequent layers, reducing temperature gradients (residual stress), which could eliminate crack formation. The new conceptualized model also opens a window for in situ heat treatment of the built samples to obtain the desired TiAl (γ-phase) and Ti3Al (α2-phase) intermetallic phases for high-temperature operations. In situ heat treatment would also improve the homogeneity of the microstructure of LPBF manufactured samples.

Study Regarding the Influence of the Printing Orientation Angle on the Mechanical Behavior of Parts Manufactured by Material Jetting

2021 ◽  
Vol 58 (3) ◽  
pp. 198-209
Author(s):  
Vasile Cojocaru ◽  
Doina Frunzaverde ◽  
Dorian Nedelcu ◽  
Calin-Octavian Miclosina ◽  
Gabriela Marginean
Keyword(s):  
Additive Manufacturing ◽  
Rapid Prototyping ◽  
Tensile Test ◽  
Mechanical Behavior ◽  
Process Parameters ◽  
Orientation Angle ◽  
Tensile Tests ◽  
Anisotropic Behavior ◽  
Optimization Of Process Parameters ◽  
Printed Materials

Initially developed as a rapid prototyping tool for project visualization and validation, the recent development of additive manufacturing (AM) technologies has led to the transition from rapid prototyping to rapid manufacturing. As a consequence, increased attention has to be paid to the mechanical, chemical and physical properties of the printed materials. In mechanical engineering, the widespread use of AM technologies requires the optimization of process parameters and material properties in order to obtain components with high, repeatable and time-stable mechanical properties. One of the main problems in this regard is the anisotropic behavior of components made by additive manufacturing, determined by the type of material, the 3D printing technology, the process parameters and the position of the components in the printing space. In this paper the influence of the printing orientation angle on the tensile behavior of specimens made by material jetting is investigated. The aim was to determine if the positioning of components at different angles relative to the X-axis of the printer (and implicitly in relation to the multijet printing head) contributes to anisotropic behavior. The material used was a photopolymer with a mechanical strength between 40 MPa and 55 MPa, according to the producer. Four sets of tensile test specimens were manufactured, using flat build orientation and positioned on the printing table at angles of 0˚, 30˚, 60˚ and 90˚ to the X-axis of the printer. Comparative analysis of the mechanical behavior was carried out by tensile tests and microscopic investigations of the tensile test specimens fracture surfaces.

Sign in / Sign up

Export Citation Format

Share Document