Effect of Rear Wing on Time-Averaged Ground Vehicle Wake With Variable Slant Angle

2021 ◽  
Vol 143 (7) ◽  
Author(s):  
Md. Shehab Uddin ◽  
Fazlur Rashid

Abstract The slant angle plays a crucial role in the flow property of hatchback ground vehicles. An optimum slant angle is obligatory for better handling the ground vehicles when fitted with a rear wing. In this regard, the variation of time-averaged flow properties around a wing-attached hatchback ground vehicle (Ahmed body) due to a variable slant angle is accessed by this paper. The design includes a scaled Ahmed body as a reference ground vehicle and a rear wing with NACA 0018 profile. The computational studies are executed with Reynolds-averaged Navier–Stokes based k-epsilon turbulence model with nonequilibrium wall function. The vehicle's model is scaled to 75% of the actual model, and analyses are conducted with Reynolds number 2.7 × 106. After the study, it is observed that a 15 deg slant angle is the critical angle for the wing attached state in which the drag coefficient is maximum. After this angle, a sudden reduction of coefficients is observed, where 25 deg is critical for without wing condition. Besides this, the two counter-rotating horseshoe vortices in the separation bubble and side edge c-pillar vortices also behave differently due to the wing's presence. The turbulent kinetic energy variation and the variation in coefficients of surface pressure are also affected by the rear wing attachment. This paper will assist in finding the optimum slant angle for hatchback ground vehicles in the presence of a rear wing. Thus the study will help in increasing stability and control for hatchback ground vehicles.

2020 ◽  
Vol 19 (1) ◽  
Author(s):  
Naufal Ikhsan Alfajri ◽  
Dominicus D. P. Tjahjana, Ph.D ◽  
Budi Kristiawan

<div class="WordSection1"><p>Faktor aerodinamika merupakan faktor penting dalam mendesain suatu kendaraan. Faktor aerodinamika menjadi penting karna sangat berpengaruh pada performa kendaraan dan faktor keselamatan dari kendaraan itu sendiri. Salah satu cara untuk meningkatkan faktor aerodinamika pada kendaraan darat (<em>ground vehicle</em>) adalah dengan menambahkan rear wing dengan <em>Gurney Flap</em>. Penggunaan rear wing dengan <em>Gurney Flap</em> ini dapat meningkatkan nilai koefisien <em>lift</em> negatif dari suatu kendaraan, sehingga meningkatkan performa mobil pada saat kecepatan tinggi dan pada saat berbelok ataupun mengerem.  Penelitian ini akan membahas tentang karakteristik aerodinamik dari salah satu jenis high <em>lift</em> airfoil yaitu airfoil MSHD dengan penambahan <em>Gurney Flap</em> dengan variasi kemiringan sudut serang dari airfoil, dan ketinggian dari <em>Gurney Flap</em>. Penelitian ini dilakukan dengan mensimulasikan variasi airfoil yang diberikan yang dipasang pada ahmed body dengan kemiringan sudut rear slant 15⁰ atau menyerupai mobil tipe sedan (<em>fastback</em>). Simulasi digunakan dengan computational fluid dynamic (CFD) dengan variasi 3 kemiringan sudut airfoil yaitu 0⁰, 7,5⁰, dan 15⁰ dan 5 ketinggian <em>Gurney Flap</em> sebesar 0%, 0,5%, 1%, 1,5% dan 2% dari panjang chord line untuk setiap kemiringan sudut airfoil. Hasil dari penelitian ini, didapat nilai koefisien <em>lift</em>/<em>drag</em> terendah pada variasi kemiringan sudut airfoil 15⁰ dengan ketinggian <em>Gurney Flap</em> 2%c dengan nilai -1,465 yang terdapat peningkatan nilai sebesar 17,77% dibandingkan dengan tanpa <em>Gurney Flap</em>.<em></em></p></div><em><br clear="all" /></em><div class="WordSection1"><p>Faktor aerodinamika merupakan faktor penting dalam mendesain suatu kendaraan. Faktor aerodinamika menjadi penting karna sangat berpengaruh pada performa kendaraan dan faktor keselamatan dari kendaraan itu sendiri. Salah satu cara untuk meningkatkan faktor aerodinamika pada kendaraan darat (<em>ground vehicle</em>) adalah dengan menambahkan rear wing dengan <em>Gurney Flap</em>. Penggunaan rear wing dengan <em>Gurney Flap</em> ini dapat meningkatkan nilai koefisien <em>lift</em> negatif dari suatu kendaraan, sehingga meningkatkan performa mobil pada saat kecepatan tinggi dan pada saat berbelok ataupun mengerem.  Penelitian ini akan membahas tentang karakteristik aerodinamik dari salah satu jenis high <em>lift</em> airfoil yaitu airfoil MSHD dengan penambahan <em>Gurney Flap</em> dengan variasi kemiringan sudut serang dari airfoil, dan ketinggian dari <em>Gurney Flap</em>. Penelitian ini dilakukan dengan mensimulasikan variasi airfoil yang diberikan yang dipasang pada ahmed body dengan kemiringan sudut rear slant 15⁰ atau menyerupai mobil tipe sedan (<em>fastback</em>). Simulasi digunakan dengan computational fluid dynamic (CFD) dengan variasi 3 kemiringan sudut airfoil yaitu 0⁰, 7,5⁰, dan 15⁰ dan 5 ketinggian <em>Gurney Flap</em> sebesar 0%, 0,5%, 1%, 1,5% dan 2% dari panjang chord line untuk setiap kemiringan sudut airfoil. Hasil dari penelitian ini, didapat nilai koefisien <em>lift</em>/<em>drag</em> terendah pada variasi kemiringan sudut airfoil 15⁰ dengan ketinggian <em>Gurney Flap</em> 2%c dengan nilai -1,465 yang terdapat peningkatan nilai sebesar 17,77% dibandingkan dengan tanpa <em>Gurney Flap</em>.<em></em></p></div><em><br clear="all" /></em>


Author(s):  
S. Aubrun ◽  
F. Alvi ◽  
A. Leroy ◽  
A. Kourta

A model of a generic vehicle shape, the Ahmed body with a slant angle of 25°, is equipped with an array of blowing steady microjets 6mm downstream of the separation line between the roof and the slanted rear window. The goal of the present study is to evaluate the effectiveness of this actuation method in reducing the aerodynamic drag, by reducing or suppressing the 3D closed separation bubble located on the slanted surface. The efficiency of this control approach is quantified with the help of aerodynamic load measurements. The changes in the flow field when control is applied are examined using PIV measurements and skin friction visualizations. By activating the steady microjet array, the drag coefficient was reduced by 9 to 11%, depending on the Reynolds number. The modification of the flow topology under progressive flow control is particularly studied.


Author(s):  
Jian Chu ◽  
Soovadeep Bakshi ◽  
Hansen Qin ◽  
Zeyu Yan ◽  
Dongmei Chen

Abstract With the development of factory automation, intelligent manufacturing system technology, and three-dimensional automated warehouses, an automatic ground vehicle (AGV) became an essential part of controlling the discrete logistics management system within a facility. The scope of the AGV application and technical capability have been rapidly developed in recent years. However, it is highly time-consuming and resource-intensive to develop a comprehensive AGV platform in both industrial setting and academic environment to design and control of an AGV system. This paper introduces a platform for conducting AGV research and deployment, which consists of the hardware prototyping and entire software system development. By using this platform, users can readily develop customized AGV systems or verify their self-developed algorithms.


2015 ◽  
Vol 137 (12) ◽  
Author(s):  
Domenic L. Barsotti ◽  
Eduardo A. Divo ◽  
Sandra K. S. Boetcher

The present study investigates active drag reduction of an Ahmed body with a rear slant angle of 25 deg. The drag is reduced by implementing slot jets on the rear slant and rear surface of the Ahmed body. Transient numerical experiments were conducted using the improved delayed detached eddy simulation (IDDES) turbulence model. Jet velocity, position, size, and angle were parametrically varied, and time-averaged drag coefficients for various jet configurations were calculated. Reynolds numbers based on the length of the Ahmed body were varied, but special focus was given to the high-drag case when Re = 1.4 × 106. It was found that by using slot jets at the rear and rear slant, the drag coefficient was reduced by 22%. In order to investigate the physical mechanisms for the reduction in drag, proper orthogonal decomposition (POD) was used to visualize the turbulent coherent structures in the near wake of the Ahmed body.


Author(s):  
Adrien Thacker ◽  
Sandrine Aubrun ◽  
Annie Leroy ◽  
Philippe Devinant

This study presents results of an experimental analysis of the unsteady features of the flow around the rear part of an Ahmed body with a rear slant angle of 25°. This analysis focuses on the half elliptic separation bubble that developps on the rear slanted surface and brings new information, improving the understanding of the flow unsteadiness. Flow investigations are carried out using hot wire probe measurements for velocity fluctuations in the plane of symmetry above the rear slanted surface and five unsteady flush mounted pressure taps (Kulite transducers) simultaneously acquiring static pressure fluctuations along the middle line of the slanted surface. Spectral analysis and Proper Orthogonal Decomposition of the output signal show the emergence of a low frequency unsteadiness and high frequency activities which, in accordance with bibliography about separated and reattaching flow configurations, is related to a global flapping of the separated shear layer and a large scale vortices shedding. Characteristic frequencies of both instabilities is given and physical effects of the low frequency unsteadiness is related with the flapping motion of the separated shear layer.


2020 ◽  
Vol 22 (4) ◽  
pp. 1047-1060
Author(s):  
S. Shadmani ◽  
S. M. Mousavi Nainiyan ◽  
R. Ghasemiasl ◽  
M. Mirzaei ◽  
S. G. Pouryoussefi

AbstractAhmed Body is a standard and simplified shape of a road vehicle that's rear part has an important role in flow structure and it's drag force. In this paper flow control around the Ahmed body with the rear slant angle of 25° studied by using the plasma actuator system situated in middle of the rear slant surface. Experiments conducted in a wind tunnel in two free stream velocities of U = 10m/s and U = 20m/s using steady and unsteady excitations. Pressure distribution and total drag force were measured and smoke flow visualization carried out in this study. The results showed that at U = 10m/s using plasma actuator suppress the separated flow over the rear slant slightly and be effective on pressure distribution. Also, total drag force reduces in steady and unsteady excitations for 3.65% and 2.44%, respectively. At U = 20m/s, using plasma actuator had no serious effect on the pressure distribution and total drag force.


2018 ◽  
Author(s):  
Yuan Zou ◽  
Junqiu Li ◽  
Xiaosong Hu ◽  
Yann Chamaillard

Sign in / Sign up

Export Citation Format

Share Document