The Effects of Operational, Testing and Material Characterisations On the Change in Yield Strength From Plate to Pipe

2021 ◽  
Author(s):  
Jingsi Jiao ◽  
Cheng Lu ◽  
Valerie Linton ◽  
Frank Barbaro
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Yield Strength ◽  
Finite Element Model ◽  
Mechanical Performance ◽  
Element Model ◽  
Critical Knowledge ◽  
Operational Testing ◽  
Wide Range ◽  
The Individual

Abstract The mechanical performance of the pipe sample has a direct influence on their application in real environments and a significant economic impact on manufacturers, especially when the pipe products do not meet required specifications. There is often a change in the yield strength from plate to pipe due to strain hardening and the Bauschinger effect. The current work sets out to provide a critical knowledge base for this change, with emphasizing the important influence of the plate mechanical properties on the pipe. So that the quality of pipe can be further ensured. In the work, firstly, the historical data of the pipe yield strength were collected and plotted together from a wide range of published sources to provide a broad quantitative insight, which provides a quantitative review on the parameters that govern the final pipe yield strength. Secondly, a Finite Element model of the pipe forming and mechanical evaluation was developed and then validated with available industrial testing results, in where the effects of operational and testing parameters on the pipe yield strength were analysed and discussed in detail. Finally, using the validated Finite Element model, a parametric study was conducted to dissect the individual role that each of the material parameters plays on changing the yield strength from plate to pipe. We found that the yield strength of the pipe can differ significantly. This work sheds lights on the desired plate mechanical properties to optimize the final pipe yield strength.

A finite element model of an idealized diarthrodial joint to investigate the effects of variation in the mechanical properties of the tissues

2003 ◽  
Vol 217 (5) ◽  
pp. 341-348 ◽  
Author(s):  
F H Dar ◽  
R M Aspden
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Articular Cartilage ◽  
Finite Element Model ◽  
Factorial Design ◽  
Subchondral Bone ◽  
Element Model ◽  
Bone Plate ◽  
Subchondral Bone Plate ◽  
Wide Range

The stiffness of articular cartilage increases dramatically with increasing rate of loading, and it has been hypothesized that increasing the stiffness of the subchondral bone may result in damaging stresses being generated in the articular cartilage. Despite the interdependence of these tissues in a joint, little is understood of the effect of such changes in one tissue on stresses generated in another. To investigate this, a parametric finite element model of an idealized joint was developed. The model incorporated layers representing articular cartilage, calcified cartilage, the subchondral bone plate and cancellous bone. Taguchi factorial design techniques, employing a two-level full-factorial and a four-level fractional factorial design, were used to vary the material properties and thicknesses of the layers over the wide range of values found in the literature. The effects on the maximum values of von Mises stress in each of the tissues are reported here. The stiffness of the cartilage was the main factor that determined the stress in the articular cartilage. This, and the thickness of the cartilage, also had the largest effect on the stresses in all the other tissues with the exception of the subchondral bone plate, in which stresses were dominated by its own stiffness. The stiffness of the underlying subchondral bone had no effect on the stresses generated in the cartilage. This study shows how stresses in the various tissues are affected by changes in their mechanical properties and thicknesses. It also demonstrates the benefits of a structured, systematic approach to investigating parameter variation in finite element models.

scholarly journals Mechanical properties of nacre constituents and their impact on mechanical performance

2006 ◽  
Vol 21 (8) ◽  
pp. 1977-1986 ◽  
Author(s):  
François Barthelat ◽  
Chun-Ming Li ◽  
Claudia Comi ◽  
Horacio D. Espinosa
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Finite Element ◽  
Finite Element Model ◽  
Single Crystal ◽  
Elastic Properties ◽  
Mechanical Performance ◽  
Element Model ◽  
Compression Tests ◽  
Red Abalone

The mechanical properties of nacre constituents from red abalone were investigated. Electron microscopy studies revealed that the tablets are composed of single-crystal aragonite with nanograin inclusions. Both nanoasperities and aragonite bridges are present within the interfaces between the tablets. By means of nanoindentation and axial compression tests, we identified single tablet elastic and inelastic properties. The elastic properties are very similar to those of single-crystal aragonite. However, their strength is higher than previously reported values for aragonite. A finite element model of the interface accounting for nanoasperities and the identified properties revealed that the nanoasperities are strong enough to withstand climbing and resist tablet sliding, at least over the initial stages of deformation. Furthermore, it was observed that the model over-predicts strength and under-predicts ductility. Therefore, we conclude that other interface features must be responsible for the enhanced performance of nacre over its constituents.

Design and characterization of a hybrid soft gripper with active palm pose control

2020 ◽  
Vol 39 (14) ◽  
pp. 1668-1685 ◽  
Author(s):  
Vignesh Subramaniam ◽  
Snehal Jain ◽  
Jai Agarwal ◽  
Pablo Valdivia y Alvarado
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Composite Structure ◽  
Element Model ◽  
Open Loop ◽  
Aspect Ratios ◽  
Maximum Payload ◽  
Wide Range ◽  
Pose Control

The design and characterization of a soft gripper with an active palm to control grasp postures is presented herein. The gripper structure is a hybrid of soft and stiff components to facilitate integration with traditional arm manipulators. Three fingers and a palm constitute the gripper, all of which are vacuum actuated. Internal wedges are used to tailor the deformation of a soft outer reinforced skin as vacuum collapses the composite structure. A computational finite-element model is proposed to predict finger kinematics. Thanks to its active palm, the gripper is capable of grasping a wide range of part geometries and compliances while achieving a maximum payload of 30 N. The gripper natural softness enables robust open-loop grasping even when components are not properly aligned. Furthermore, the grasp pose of objects with various aspect ratios and compliances can be robustly maintained during manipulation at linear accelerations of up to 15 m/s2 and angular accelerations of up to 5.23 rad/s2.

Finite Element Analysis of Mechanics Property on Memory Alloy Patella Claws with Anti-Shearing Force

2014 ◽  
Vol 635-637 ◽  
pp. 507-510
Author(s):  
Dong Peng Du ◽  
Zhe Wu ◽  
Juan Xing ◽  
Xiao Yan Gong ◽  
Xiang Wen Miu ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Mechanical Performance ◽  
Tensile Force ◽  
Research Result ◽  
Element Model ◽  
3D Models ◽  
Shearing Force ◽  
Maximum Displacement ◽  
Element Analysis

When strong exercise on human being body, respectively, under knees 30°, 60°,90°, using PRO/E5.0 software to establish the transverse patella fracture and anti-shearing force patella claws 3D models, then the two structure models were assembled and imported into ABAQUS10.1 software to establish the finite element model of patellar fracture fixed within patella claw, and analyzed the mechanical performance in perforce finite element model. Under the same boundary conditions, the maximum displacement and deformation of each components were different at every flexion angle. Compared with anti-shearing force patella claw and AO tensile force girdle, the patella claw with stronger resistance to tension and anti-shearing force was more stable. Deformation and displacement of patella claw in accordance with biomechanical research result that is needed by clinical. Its stability will satisfy clinical requirements for functional exercise.

Finite Element Modeling of Selective Laser Melting 316L Stainless Steel Parts for Evaluating the Mechanical Properties

2016 ◽  
Author(s):  
Arman Ahmadi ◽  
Narges Shayesteh Moghaddam ◽  
Mohammad Elahinia ◽  
Haluk E. Karaca ◽  
Reza Mirzaeifar
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Stainless Steel ◽  
Finite Element Model ◽  
Grain Boundaries ◽  
Mechanical Response ◽  
Element Model ◽  
Polycrystalline Materials ◽  
Microstructural Properties ◽  
Laser Melting

Selective laser melting (SLM) is an additive manufacturing technique in which complex parts can be fabricated directly by melting layers of powder from a CAD model. SLM has a wide range of application in biomedicine and other engineering areas and it has a series of advantages over traditional processing techniques. A large number of variables including laser power, scanning speed, scanning line spacing, layer thickness, material based input parameters, etc. have a considerable effect on SLM process materials. The interaction between these parameters is not completely studied. Limited studies on balling effect in SLM, densifications under different processing conditions, and laser re-melting, have been conducted that involved microstructural investigation. Grain boundaries are amongst the most important microstructural properties in polycrystalline materials with a significant effect on the fracture and plastic deformation. In SLM samples, in addition to the grain boundaries, the microstructure has another set of connecting surfaces between the melt pools. In this study, a computational framework is developed to model the mechanical response of SLM processed materials by considering both the grain boundaries and melt pool boundaries in the material. To this end, a 3D finite element model is developed to investigate the effect of various microstructural properties including the grains size, melt pools size, and pool connectivity on the macroscopic mechanical response of the SLM manufactured materials. A conventional microstructural model for studying polycrystalline materials is modified to incorporate the effect of connecting melt pools beside the grain boundaries. In this model, individual melt pools are approximated as overlapped cylinders each containing several grains and grain boundaries, which are modeled to be attached together by the cohesive zone method. This method has been used in modeling adhesives, bonded interfaces, gaskets, and rock fracture. A traction-separation description of the interface is used as the constitutive response of this model. Anisotropic elasticity and crystal plasticity are used as constitutive laws for the material inside the grains. For the experimental verification, stainless steel 316L flat dog bone samples are fabricated by SLM and tested in tension. During fabrication, the power of laser is constant, and the scan speed is changed to study the effect of fabrication parameters on the mechanical properties of the parts and to compare the result with the finite element model.

Research on the Shear Nails on the Arch Foot of an Oblique Cross Steel Box Arch Bridge

2013 ◽  
Vol 663 ◽  
pp. 49-54
Author(s):  
Xin Huang ◽  
Z.Z. Bai ◽  
De Wei Chen
Keyword(s):  
Finite Element ◽  
Shear Stress ◽  
Finite Element Model ◽  
Mechanical Performance ◽  
Maximum Shear Stress ◽  
Element Model ◽  
Bottom Up ◽  
Arch Bridge ◽  
Distribution Rules

In order to find the distribution rules on the shear nails on the steel-concrete composite segment of arch foot of an oblique cross steel box arch bridge, it established a space finite element model through the engineering of Wenzhou Weiwulu oblique cross steel box arch bridge, analyzing the maximum shear stress of the shear nails under normal using stage. The result shows that the welding nails in different position have a great difference in their shear stress. The welding nails which welded in a place that has a greater stiffness bear a bigger shear stress. So their mechanical performance of steel-concrete segment is better. In addition, the maximum shear stress becomes bigger from the bottom up to the top of the steel box.

Sign in / Sign up

Export Citation Format

Share Document