Fast Mechanical Properties Estimation for Finite Element Model of Bone Tissue

2008 ◽  
Author(s):  
Sheng Zheng Wang ◽  
Jie Yang
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Finite Element Model ◽  
Bone Tissue ◽  
Element Model

Finite Element Modeling of Selective Laser Melting 316L Stainless Steel Parts for Evaluating the Mechanical Properties

2016 ◽  
Author(s):  
Arman Ahmadi ◽  
Narges Shayesteh Moghaddam ◽  
Mohammad Elahinia ◽  
Haluk E. Karaca ◽  
Reza Mirzaeifar
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Stainless Steel ◽  
Finite Element Model ◽  
Grain Boundaries ◽  
Mechanical Response ◽  
Element Model ◽  
Polycrystalline Materials ◽  
Microstructural Properties ◽  
Laser Melting

Selective laser melting (SLM) is an additive manufacturing technique in which complex parts can be fabricated directly by melting layers of powder from a CAD model. SLM has a wide range of application in biomedicine and other engineering areas and it has a series of advantages over traditional processing techniques. A large number of variables including laser power, scanning speed, scanning line spacing, layer thickness, material based input parameters, etc. have a considerable effect on SLM process materials. The interaction between these parameters is not completely studied. Limited studies on balling effect in SLM, densifications under different processing conditions, and laser re-melting, have been conducted that involved microstructural investigation. Grain boundaries are amongst the most important microstructural properties in polycrystalline materials with a significant effect on the fracture and plastic deformation. In SLM samples, in addition to the grain boundaries, the microstructure has another set of connecting surfaces between the melt pools. In this study, a computational framework is developed to model the mechanical response of SLM processed materials by considering both the grain boundaries and melt pool boundaries in the material. To this end, a 3D finite element model is developed to investigate the effect of various microstructural properties including the grains size, melt pools size, and pool connectivity on the macroscopic mechanical response of the SLM manufactured materials. A conventional microstructural model for studying polycrystalline materials is modified to incorporate the effect of connecting melt pools beside the grain boundaries. In this model, individual melt pools are approximated as overlapped cylinders each containing several grains and grain boundaries, which are modeled to be attached together by the cohesive zone method. This method has been used in modeling adhesives, bonded interfaces, gaskets, and rock fracture. A traction-separation description of the interface is used as the constitutive response of this model. Anisotropic elasticity and crystal plasticity are used as constitutive laws for the material inside the grains. For the experimental verification, stainless steel 316L flat dog bone samples are fabricated by SLM and tested in tension. During fabrication, the power of laser is constant, and the scan speed is changed to study the effect of fabrication parameters on the mechanical properties of the parts and to compare the result with the finite element model.

scholarly journals The Development of Finite Element Model to Investigate the Structural Performance of Reinforced Concrete Hollow Beams

2020 ◽  
Vol 6 (1) ◽  
pp. 171
Author(s):  
Jen Hua Ling ◽  
Lin Li Chan ◽  
Wen Kam Leong ◽  
How Teck Sia
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Finite Element Model ◽  
Beam Width ◽  
Element Model ◽  
Reinforced Concrete Beam ◽  
Strength Properties ◽  
Beam Deflection ◽  
Hollow Beam

The self-weight of a reinforced concrete beam contributes to the permanent loads of a structure. This can be reduced by creating a longitudinal void along the beam so that it will not affect the performance of the beam. In addition, this process can reduce the amount of building cost. Therefore, a finite element model was developed in this study with the aid of a computer program, Ansys, to investigate the behavior of the hollow beam. The model was tested for reliability by comparing the predicted results with those obtained from the experiment in terms of the load-displacement responses, mechanical properties, and parametric responses. The result showed that the reliability of the model was questionable. The main cause of the non-reliability was the inaccurate prediction of the beam deflection by the model. The poor prediction of beam deflection led to significant variations of relevant mechanical properties including stiffness, deflection, and ductility. For beam deflection, only 1/3 of the specimens were correctly predicted with a reliability of 36% while the strength properties were discovered to have higher values as observed in the yield and the ultimate strengths with 73% and 64% respectively. However, both the model and experimental results showed the hollow beam was relatively effective when the diameter of the longitudinal void was 1/3 times the beam width and placed at the neutral axis. For the evaluation to improve the reliability, some revision including the properties of the materials, boundary conditions of the beam support, bonding conditions between different materials, and meshing shape and size suppose to be applied to the model. 

scholarly journals A validated finite element study of stress shielding in a novel hybrid knee implant

2021 ◽  
Author(s):  
Ziauddin Mahboob
Keyword(s):  
Experimental Study ◽  
Finite Element ◽  
Finite Element Model ◽  
Bone Tissue ◽  
Stress Shielding ◽  
Stress Transfer ◽  
Element Model ◽  
Implant Design ◽  
Polyamide 12 ◽  
Compressive Loads

This study (1) proposes a hybrid knee implant design to improve stress transfer to bone tissue in the distal femur by modifying a conventional femoral implant to include a layer of carbon fibre reinforced polyamide 12, and (2) develops a finite element model of the prosthetic knee joint, validated by comparison with a parallel experimental study. The Duracon knee system was used in the experimental study, and its geometry was modelled using CAD software. Synthetic bone replicas were used instead of cadaveric specimens in the experiments. The strains generated on the femur and implant surfaces were measured under axial compressive loads of 2000 N and 3000 N. A mesh of 105795 nodes was needed to obtain sufficient accuracy in the finite element model, which reproduced the experimental reading within 10-23% in six of the eight test locations. The model of the proposed hybrid design showed considerable improvements in stress transfer to the bone tissue at three test flexion angles of 0°, 20°, and 60°.

Tribological Process Characterization With In-Situ Quantitative Nano-Scale Metrology

2005 ◽  
Author(s):  
Antanas Daugela ◽  
Alex Meyman ◽  
Vladimir Knyazik ◽  
Nikolai Yeremin
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Optical Microscope ◽  
Nano Scale ◽  
Process Characterization ◽  
Microscope Imaging

A novel quantitative nano+micro-tribometer with integrated nanoindenter, SPM and optical microscope imaging has been used to characterize mechanical properties of Cu coated Si wafers at various test stages. A 2D Finite Element Model was developed to study changes on workhardened contacts assessed via nanoindentation experiments.

Numerical Analysis of Mechanical Properties of Precast Segmental Concrete Test Beam with External Tendons

2013 ◽  
Vol 639-640 ◽  
pp. 460-469
Author(s):  
Hai Bo Jiang ◽  
Yan Song Deng ◽  
Yun Qiu ◽  
Chun Gen Wei ◽  
Li Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Numerical Analysis ◽  
Finite Element Model ◽  
Simulation Analysis ◽  
Crack Opening ◽  
Element Model ◽  
Test Beam ◽  
External Tendons ◽  
Key Factor

A finite element model is proposed for numerical analysis of mechanical properties of precast segmental concrete test beam with external tendons. The 3D finite element model of test beam is established by SOLID65 element in ANSYS software, while the dry joint between segments is simulated by contact element, and the attachment between concrete beam and external prestressed tendons is achieved by node coupling method. Numerical simulation analysis reveals structural behavior, stress variations and crack opening cases of joints of the test beam by considering the concrete material and geometric nonlinearity. Influencing factors of the bending mechanical properties of the test beam are researched with different tendon types, secondary effect of external tendons and external tendon slip at deviation. Results of the numerical analysis reveal that the segmental joints are in the compressive state below the 300kN.Crack opening is the key factor of the mechanical properties of the test beam above the 300kN.The results can be used for structural design of precast segmental bridge.

Inverse Estimation of the In Vivo Mechanical Properties of the Human Cornea

2000 ◽  
Author(s):  
Shou-sung Chang ◽  
Peter M. Pinsky
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Human Cornea ◽  
Corneal Tissue ◽  
Shear Moduli ◽  
Inverse Estimation ◽  
Nonlinear Finite Element Model

Abstract Various forms of refractive surgery for vision correction have come into clinical practice in which the corneal tissue is either incised, removed, added to, or redistributed. The outcomes of these procedures must be to a large extent determined by the intrinsic mechanical properties of the major structural layer of the cornea, the stroma1. If these mechanical properties, principally the Young’s modulus and shear modulus, are established for the human cornea, it will be possible to include them in a finite element model of the stroma that can help predict the outcome of keratorefractive procedures. In this study an opto-mechanical testing device was developed to measure the contour of a cornea deformed in situ by a mechanical probe. A nonlinear finite element model of the cornea was then constructed to simulate the experiment for use in inverse estimation of the in vivo Young’s and shear moduli of an individual eye.

The Effects of Operational, Testing and Material Characterisations On the Change in Yield Strength From Plate to Pipe

2021 ◽  
Author(s):  
Jingsi Jiao ◽  
Cheng Lu ◽  
Valerie Linton ◽  
Frank Barbaro
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Yield Strength ◽  
Finite Element Model ◽  
Mechanical Performance ◽  
Element Model ◽  
Critical Knowledge ◽  
Operational Testing ◽  
Wide Range ◽  
The Individual

Abstract The mechanical performance of the pipe sample has a direct influence on their application in real environments and a significant economic impact on manufacturers, especially when the pipe products do not meet required specifications. There is often a change in the yield strength from plate to pipe due to strain hardening and the Bauschinger effect. The current work sets out to provide a critical knowledge base for this change, with emphasizing the important influence of the plate mechanical properties on the pipe. So that the quality of pipe can be further ensured. In the work, firstly, the historical data of the pipe yield strength were collected and plotted together from a wide range of published sources to provide a broad quantitative insight, which provides a quantitative review on the parameters that govern the final pipe yield strength. Secondly, a Finite Element model of the pipe forming and mechanical evaluation was developed and then validated with available industrial testing results, in where the effects of operational and testing parameters on the pipe yield strength were analysed and discussed in detail. Finally, using the validated Finite Element model, a parametric study was conducted to dissect the individual role that each of the material parameters plays on changing the yield strength from plate to pipe. We found that the yield strength of the pipe can differ significantly. This work sheds lights on the desired plate mechanical properties to optimize the final pipe yield strength.

Sign in / Sign up

Export Citation Format

Share Document