Design of a Continuum Mechanism that Matches the Movement of an Eight-bar Linkage

2020 ◽  
pp. 1-11
Author(s):  
Xueao Liu ◽  
J. Michael McCarthy
Keyword(s):  
Finite Element Analysis ◽  
Rigid Body ◽  
Design Methodology ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Initial Structure ◽  
Element Analysis ◽  
Kinematic Synthesis ◽  
Generic Structure ◽  
Straight Line

Abstract This paper presents a design methodology for mechanisms consisting of a single continuous structure, continuum mechanisms, that blends the kinematic synthesis of rigid-body mechanisms with topology optimization for compliant mechanisms. Rather than start with a generic structure that is shaped to achieve a required force deflection task for a compliant mechanism, our approach shapes the initial structure based on kinematic synthesis of a rigid body mechanism for the required movement, then the structure is shaped using Finite Element Analysis to achieve the required force deflection relationship. The result of this approach is a continuum mechanism with the same workpiece movement as the rigid link mechanism when actuated. An example illustrates the design process to obtain an eight-bar linkage that guides its workpiece in straight-line rectilinear movement. We show that the resulting continuum mechanism provides the desired rectilinear movement. A 210 mm physical model machined from Nylon-6 is shown to achieve 21.5mm rectilinear movement with no perceived deviation from a straight-line.

Bistable Compliant Four-Bar Mechanisms With a Single Torsional Spring

2006 ◽  
Author(s):  
Adarsh Mavanthoor ◽  
Ashok Midha
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanism Design ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Stored Energy ◽  
Element Analysis ◽  
Bistable Behavior ◽  
Torsional Spring ◽  
Bistable Mechanism

Significant reduction in cost and time of bistable mechanism design can be achieved by understanding their bistable behavior. This paper presents bistable compliant mechanisms whose pseudo-rigid-body models (PRBM) are four-bar mechanisms with a torsional spring. Stable and unstable equilibrium positions are calculated for such four-bar mechanisms, defining their bistable behavior for all possible permutations of torsional spring locations. Finite Element Analysis (FEA) and simulation is used to illustrate the bistable behavior of a compliant mechanism with a straight compliant member, using stored energy plots. These results, along with the four-bar and the compliant mechanism information, can then be used to design a bistable compliant mechanism to meet specified requirements.

scholarly journals Design and Validation of a Single-SOI-Wafer 4-DOF Crawling Microgripper

Micromachines ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 376 ◽  
Author(s):  
Matteo Verotti ◽  
Alvise Bagolini ◽  
Pierluigi Bellutti ◽  
Nicola Pio Belfiore
Keyword(s):  
Finite Element Analysis ◽  
Rigid Body ◽  
Compliant Mechanism ◽  
Silicon On Insulator ◽  
Element Analysis ◽  
Deep Reactive Ion Etching ◽  
Theoretical Simulation ◽  
Body Model ◽  
Replacement Method ◽  
Rigid Body Model

This paper deals with the manipulation of micro-objects operated by a new concept multi-hinge multi-DoF (degree of freedom) microsystem. The system is composed of a planar 3-DoF microstage and of a set of one-DoF microgrippers, and it is arranged is such a way as to allow any microgripper to crawl over the stage. As a result, the optimal configuration to grasp the micro-object can be reached. Classical algorithms of kinematic analysis have been used to study the rigid-body model of the mobile platform. Then, the rigid-body replacement method has been implemented to design the corresponding compliant mechanism, whose geometry can be transferred onto the etch mask. Deep-reactive ion etching (DRIE) is suggested to fabricate the whole system. The main contributions of this investigation consist of (i) the achievement of a relative motion between the supporting platform and the microgrippers, and of (ii) the design of a process flow for the simultaneous fabrication of the stage and the microgrippers, starting from a single silicon-on-insulator (SOI) wafer. Functionality is validated via theoretical simulation and finite element analysis, whereas fabrication feasibility is granted by preliminary tests performed on some parts of the microsystem.

Application of Rigid-Body-Linkage Static Balancing Techniques to Reduce Actuation Effort in Compliant Mechanisms

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Sangamesh R. Deepak ◽  
Amrith N. Hansoge ◽  
G. K. Ananthasuresh
Keyword(s):  
Rigid Body ◽  
General Framework ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Small Length ◽  
Element Analysis ◽  
Static Balancing ◽  
Free Length ◽  
First Order ◽  
Taylor’S Series

There are analytical methods in the literature where a zero-free-length spring-loaded linkage is perfectly statically balanced by addition of more zero-free-length springs. This paper provides a general framework to extend these methods to flexure-based compliant mechanisms through (i) the well know small-length flexure model and (ii) approximation between torsional springs and zero-free-length springs. We use first-order truncated Taylor's series for the approximation between the torsional springs and zero-free-length springs so that the entire framework remains analytical, albeit approximate. Three examples are presented and the effectiveness of the framework is studied by means of finite-element analysis and a prototype. As much as 70% reduction in actuation effort is demonstrated. We also present another application of static balancing of a rigid-body linkage by treating a compliant mechanism as the spring load to a rigid-body linkage.

Using Rigid-Body Mechanism Topologies to Design Shape-Changing Compliant Mechanisms

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Kai Zhao ◽  
James P. Schmiedeler
Keyword(s):  
Rigid Body ◽  
Shape Matching ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Shape Change ◽  
Mesh Network ◽  
Adaptive Antenna ◽  
Optimal Size ◽  
Dimensional Synthesis ◽  
Element Analysis

This paper uses rigid-body mechanism topologies to synthesize fully distributed compliant mechanisms that approximate a shape change defined by a set of morphing curves in different positions. For a shape-change problem, a rigid-body mechanism solution is generated first to provide the base topology. This base topology defines a preselected design space for the structural optimization in one of two ways so as to obtain a compliant mechanism solution that is typically superior to the local minimum solutions obtained from searching more expansive design spaces. In the first strategy, the dimensional synthesis directly determines the optimal size and shape of the distributed compliant mechanism having exactly the base topology. In the second strategy, an initial mesh network established from the base topology is used to generate different topologies (in addition to the base), and an improved design domain parameterization scheme ensures that only topologies with well-connected structures are evaluated. The deformation of each generated compliant mechanism is evaluated using geometrically nonlinear finite element analysis (FEA). A two-objective genetic algorithm (GA) is employed to find a group of viable designs that trade off minimizing shape matching error with minimizing maximum stress. The procedure's utility is demonstrated with three practical examples—the first two approximating open-curve profiles of an adaptive antenna and the third approximating closed-curve profiles of a morphing wing.

A Compliant Mechanism Design Methodology for Coupled and Uncoupled Systems, and Governing Free Choice Selection Considerations

2004 ◽  
Author(s):  
Ashok Midha ◽  
Yuvaraj Annamalai ◽  
Sharath K. Kolachalam
Keyword(s):  
Rigid Body ◽  
Design Methodology ◽  
Free Choice ◽  
Compliant Mechanisms ◽  
State Of The Art ◽  
Compliant Mechanism ◽  
Mechanism Synthesis ◽  
Strongly Coupled ◽  
Revolute Joints ◽  
Compliant Mechanism Design

Compliant mechanisms are defined as mechanisms that gain some, or all of their mobility from the flexibility of their members. Suitable use of pseudo-rigid-body models for compliant segments, and relying on the state-of-the-art knowledge of rigid-body mechanism synthesis types, greatly simplifies the design of compliant mechanisms. Assuming a pseudo-rigid-body four-bar mechanism, with one to four torsional springs located at the revolute joints to represent mechanism compliance, a simple, heuristic approach is provided to develop various compliant mechanism types. The synthesis with compliance method is used for three, four and five precision positions, with consideration of one to four torsional springs, to systematically develop design tables for standard mechanism synthesis types. These tables appropriately reflect the mechanism compliance by specification of either energy or torque. Examples are presented to demonstrate the use of weakly or strongly coupled sets of kinematic and energy/torque equations, as well as different compliant mechanism types in obtaining solutions.

The Stiffness Model of Leaf-Type Isosceles-Trapezoidal Flexural Pivots

2008 ◽  
Vol 130 (8) ◽  
Author(s):  
Pei Xu ◽  
Yu Jingjun ◽  
Zong Guanghua ◽  
Bi Shusheng
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Rigid Body ◽  
Compliant Mechanisms ◽  
Nonlinear Finite Element Analysis ◽  
Nonlinear Finite Element ◽  
Leaf Segment ◽  
Element Analysis ◽  
Leaf Type ◽  
Stiffness Model

A leaf-type isosceles-trapezoidal flexural pivot can be of great practical use for designing compliant mechanisms. The analysis of load-deflection behavior for such a pivot is essential to the study of the mechanisms that are comprised of them. Based on the analysis of a single special loaded leaf segment, a pseudo-rigid-body four-bar model is proposed. The four-bar model is further simplified to a pin-joint model for some simple applications. The accuracy of both models is demonstrated by comparing results to those of nonlinear finite element analysis. At last, the two models are applied to analyze the cartwheel hinge as an example.

Using Rigid-Body Mechanism Topologies to Design Path Generating Compliant Mechanisms

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Kai Zhao ◽  
James P. Schmiedeler
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Mesh Network ◽  
Optimal Topology ◽  
Optimal Size ◽  
Path Generation ◽  
Dimensional Synthesis ◽  
Straight Line ◽  
Rigid Body Transformation

For a path generation problem, this paper uses the base topology of a single degree-of-freedom (DOF) rigid-body mechanism solution to synthesize fully distributed compliant mechanisms that can trace the same path. Two different strategies are proposed to employ the base topology in the structural optimization so that its design space size can be intelligently reduced from an arbitrary complexity. In the first strategy, dimensional synthesis directly determines the optimal size and shape of the compliant mechanism solution while maintaining the exact base topology. In the second, the base topology establishes an initial mesh network to determine the optimal topology and dimensions simultaneously. To increase the possibility of converging to an optimal design, the objective metrics to evaluate the path generation ability are computed in a novel manner. A section-by-section analysis with a rigid-body transformation is implemented to examine the full path of each candidate mechanism. A two-objective genetic algorithm (GA) is employed to find a group of viable designs that tradeoff minimizing the average Euclidean distance between the desired and actual paths with minimizing the peak distance between corresponding points on those paths. Two synthesis examples generating straight-line and curved paths are presented to demonstrate the procedure's utility.

scholarly journals Compliant Mechanism Road Bicycle Brake: A Rigid-Body Replacement Case Study

2011 ◽  
Author(s):  
Brian M. Olsen ◽  
Larry L. Howell ◽  
Spencer P. Magleby
Keyword(s):  
Rigid Body ◽  
High Performance ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Element Analysis ◽  
Low Weight ◽  
Rigid Body Model ◽  
Compliant Mechanism Design

This paper demonstrates rigid-body replacement synthesis in the design a mechanism with known design objectives. The design of high-performance bicycle brakes is complicated by a variety of competing design objectives, including increased performance and low weight. But this challenge also provides a good case study to demonstrate the design of compliant mechanisms to replace traditional rigid-link mechanisms. This paper briefly reviews current road brake designs, demonstrates the use of rigid-body replacement synthesis to design a compliant mechanism, and illustrates the combination of compliant mechanism design tools. The resulting concept was generated from the modified dual-pivot brake design and is a partially compliant mechanism where one pin has the dual role of a joint and a mounting pin. The pseudo-rigid-body model, finite element analysis, and optimization algorithms are used to generate design dimensions, and designs are considered for both titanium and E-glass flexures. The resulting design has the potential of reducing the part count and overall weight while maintaining a performance similar to the benchmark.

Using Rigid-Body Mechanism Topologies to Design Shape-Changing Compliant Mechanisms

2013 ◽  
Author(s):  
Kai Zhao ◽  
James P. Schmiedeler
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Shape Change ◽  
Adaptive Antenna ◽  
Dimensional Synthesis ◽  
Element Analysis ◽  
Initial Element ◽  
Multi Objective Genetic Algorithm ◽  
Improved Design

This paper uses rigid-body mechanism topologies to synthesize distributed compliant mechanisms that approximate a shape change defined by a set of morphing curves in different positions. A single-actuator compliant mechanism is synthesized from a single degree-of-freedom rigid-body mechanism’s base topology in one of two ways. In one case, the base topology is directly evaluated through dimensional synthesis to determine the compliant mechanism’s optimal dimensions. In the second, the base topology establishes an initial element network for an optimization routine that determines topologies and dimensions simultaneously, and an improved design domain parameterization scheme ensures that only topologies with well-connected structures are evaluated. A multi-objective genetic algorithm is employed to search the design space, and the deformation is evaluated using geometrically nonlinear finite element analysis. The procedure’s utility is demonstrated with two practical examples — one approximating open-curve profiles of an adaptive antenna and the other closed-curve profiles of a morphing wing.

scholarly journals Investigation of Circular Flexural Hinge Used in Compliant Mechanism Using FEA Tool.

2016 ◽  
Vol 3 (1) ◽  
pp. 34-42
Author(s):  
M. M. Sawant ◽  
P. R. Anerao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Flexure Hinge ◽  
Experimental Setup ◽  
Element Analysis ◽  
Flexural Hinges ◽  
Improve Fatigue

To reduce fatigue failure of compliant mechanism, it is necessary to design and analyze the flexure hinge parametrically. A methodology to design a flexural hinges for compliant mechanism is proposed in this paper to improve fatigue life. Results obtained by finite element analysis shows that used design equations are reliable and easier to be used in the design of such proportion flexural hinges. The proposed analytical model gives a new viewpoint on the design of circular flexure hinge based compliant mechanisms. Circular flexural joint was manufactured by using Al 6061 T6 material and experimental setup is developed to test this flexural hinge. Results obtained by FEA were found to be in good correlation with experimental results. The variation in the results can be attributed to variation in properties of material, actual dimensions of setup etc.

Sign in / Sign up

Export Citation Format

Share Document