Profile Design for Misaligned Journal Bearings Subjected to Transient Mixed Lubrication

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Thomas Gu ◽  
Q. Jane Wang ◽  
Shangwu Xiong ◽  
Zhong Liu ◽  
Arup Gangopadhyay ◽  
...  
Keyword(s):  
Film Thickness ◽  
Performance Metrics ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Industrial Applications ◽  
Mixed Lubrication ◽  
Asperity Contact ◽  
Minimum Film Thickness ◽  
Profile Design

Misalignment between the shaft and the bearing of a journal bearing set may be inevitable and can negatively impact journal bearing performance metrics in many industrial applications. This work proposes a convex profile design of the journal surface to help counteract the negative effects caused by such a misalignment. A transient mass-conserving hydrodynamic Reynolds equation model with the Patir–Cheng flow factors and the Greenwood–Tripp pressure–gap relationship is developed to conduct the design and analysis. The results reveal that under transient impulse loading, a properly designed journal profile can help enhance the minimum film thickness, reduce mean and peak bearing frictions, and increase bearing durability by reducing the asperity-related wear load. The mechanism for the minimum film thickness improvement due to the profile design is traced to the more even distribution of the hydrodynamic pressure toward the axial center of the bearing. The reason for the reductions of the friction and wear load is identified to be the decreased asperity contact by changing the lubrication regime from mixed lubrication to nearly hydrodynamic lubrication. Parametric studies and a case study are reported to highlight the key points of the profile design and recommendations for profile height selection are made according to misalignment parameters.

An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing Performances

2001 ◽  
Vol 124 (2) ◽  
pp. 313-319 ◽  
Author(s):  
J. Bouyer ◽  
M. Fillon
Keyword(s):  
Film Thickness ◽  
Journal Bearing ◽  
Hydrodynamic Pressure ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Maximum Pressure ◽  
Minimum Film Thickness ◽  
Oil Flow ◽  
Hydrodynamic Effects

The present study deals with the experimental determination of the performance of a 100 mm diameter plain journal bearing submitted to a misalignment torque. Hydrodynamic pressure and temperature fields in the mid-plane of the bearing, temperatures in two axial directions, oil flow rate, and minimum film thickness, were all measured for various operating conditions and misalignment torques. Tests were carried out for rotational speeds ranging from 1500 to 4000 rpm with a maximum static load of 9000 N and a misalignment torque varying from 0 to 70 N.m. The bearing performances were greatly affected by the misalignment. The maximum pressure in the mid-plane decreased by 20 percent for the largest misalignment torque while the minimum film thickness was reduced by 80 percent. The misalignment caused more significant changes in bearing performance when the rotational speed or load was low. The hydrodynamic effects were then relatively small and the bearing offered less resistance to the misalignment.

Numerical Investigation on the Mixed Lubrication Performance of Water-Lubricated Coupled Journal and Thrust Bearings

2019 ◽  
Author(s):  
Yanfeng Han ◽  
Guo Xiang ◽  
Jiaxu Wang
Keyword(s):  
Friction Coefficient ◽  
Film Thickness ◽  
Thrust Bearing ◽  
Journal Bearing ◽  
Load Capacity ◽  
Hydrodynamic Pressure ◽  
Mixed Lubrication ◽  
Eccentricity Ratio ◽  
Thrust Bearings ◽  
Lubrication Performance

Abstract The mixed lubrication performance of water-lubricated coupled journal and thrust bearing (simplified as coupled bearing) is investigated by a developed numerical model. To ensure the continuity of hydrodynamic pressure and flow at the common boundary between the journal and thrust bearing, the conformal transformation is introduced to unify the solution domain of the Reynolds equation. In the presented study, the coupled effects between the journal and thrust bearing are discussed. The effects of the thrust bearing geometric film thickness on the mixed lubrication performance, including the load capacity, contact load and friction coefficient, of the journal bearing are investigated. And the effects of the journal bearing eccentricity ratio on the mixed lubrication performance of the thrust bearing are also investigated. The simulated results indicate the mutual effects between the journal and thrust bearing cannot be ignored in the coupled bearing system. The increasing thrust bearing geometric film thickness generates a decrease in load capacity of journal bearing. There exists an optimal eccentricity ratio of journal bearing that yields the minimum friction coefficient of the thrust bearing.

A Deterministic Mixed Lubrication Model for Mechanical Seals

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Christophe Minet ◽  
Noël Brunetière ◽  
Bernard Tournerie
Keyword(s):  
Flow Model ◽  
Hydrodynamic Lubrication ◽  
Industrial Applications ◽  
Mixed Lubrication ◽  
Asperity Contact ◽  
Mechanical Seals ◽  
Optimal Point ◽  
Lubrication Regimes ◽  
Face Seals ◽  
Stribeck Curves

Mechanical seals are commonly used in industrial applications. The main purpose of these components is to ensure the sealing of rotating shafts. Their optimal point of operation is obtained at the boundary between the mixed and hydrodynamic lubrication regimes. However, papers focused on this particular aspect in face seals are rather scarce compared with those dealing with other popular sealing devices. The present study thus proposes a numerical flow model of mixed lubrication in mechanical face seals. It achieves this by evaluating the influence of roughness on the performance of the seal. The choice of a deterministic approach has been made, this being justified by a review of the literature. A numerical model for the generation of random rough surfaces has been used prior to the flow model in order to give an accurate description of the surface roughness. The model takes cavitation effects into account and considers Hertzian asperity contact. Results for the model, including Stribeck curves, are presented as a function of the duty parameter.

An analysis of the influence of oil supply conditions on the thermohydrodynamic performance of a single-groove journal bearing

2003 ◽  
Vol 217 (2) ◽  
pp. 133-144 ◽  
Author(s):  
L Costa ◽  
A. S. Miranda ◽  
M Fillon ◽  
J. C. P. Claro
Keyword(s):  
Film Thickness ◽  
Journal Bearing ◽  
Hydrodynamic Pressure ◽  
Quantitative Information ◽  
Published Data ◽  
Oil Supply ◽  
Supply Pressure ◽  
Minimum Film Thickness ◽  
Theoretical Predictions ◽  
Loss Maximum

In this work a thermohydrodynamic analysis has been developed in order to investigate the influence of oil supply conditions on the performance of a journal bearing. The supply conditions considered were oil supply temperature, supply pressure, groove length and groove location. To carry out this study, the hydrodynamic pressure distribution inside the bearing has been determined using a mass-conserving cavitation model with realistic supply conditions. The energy equation and the heat conduction equation have been used for the determination of oil film and bush temperature distributions. The agreement observed between theoretical predictions and experimental published data is acceptable. Quantitative information shows that the oil supply conditions affect bearing performance parameters in different ways. Oil flowrate was markedly affected by all supply parameters studied. Power loss, maximum bush temperature and minimum film thickness were mainly dependent on oil supply temperature. The effect of supply pressure on minimum film thickness was dependent on groove location. An axial groove located at 90° to the load line gave rise to more favourable bearing performance characteristics.

Improvement of the THD Performance of a Misaligned Plain Journal Bearing

2003 ◽  
Vol 125 (2) ◽  
pp. 334-342 ◽  
Author(s):  
J. Bouyer ◽  
M. Fillon
Keyword(s):  
Film Thickness ◽  
Flow Rate ◽  
Journal Bearing ◽  
Numerical Study ◽  
Axial Flow ◽  
Hydrodynamic Pressure ◽  
Operating Conditions ◽  
Local Defect ◽  
Minimum Film Thickness ◽  
Global Defect

This numerical study deals with the improvement of the thermohydrodynamic performance of a 100 mm plain journal bearing submitted to a constant misalignment torque under steady-state conditions. The performance of the misaligned journal bearing is improved by adding either a local or a global defect to the bearing geometry. The influence on bearing performance of the local defect, situated in the zone of minimum film thickness, is analyzed by using various widths and lengths of defect. A global defect, which is conical in shape and is located at one end of the bearing, is also studied under varying direction and magnitude of misalignment torque. Our main focus was on hydrodynamic pressure, temperature distributions at the film/bush interface, oil flow rate, power losses and film thickness. The defects significantly improved the performance of the bearing. The minimum film thickness increased by more than 60 percent and the temperature decreased, whilst the axial flow rate was barely affected. Thus, the defects can be an effective solution for misaligned bearings when they are submitted to extreme operating conditions.

Dynamic Analysis of Tilting-Pad Journal Bearing—Influence of Pad Deformations

1994 ◽  
Vol 116 (3) ◽  
pp. 621-627 ◽  
Author(s):  
H. Desbordes ◽  
M. Fillon ◽  
C. Chan Hew Wai ◽  
J. Frene
Keyword(s):  
Film Thickness ◽  
Pressure Field ◽  
Journal Bearing ◽  
Maximum Pressure ◽  
Tilting Pad ◽  
Minimum Film Thickness ◽  
Dimensional Finite Element ◽  
The One ◽  
Tilting Pad Journal Bearing ◽  
Tilting Pad Journal Bearings

A theoretical nonlinear analysis of tilting-pad journal bearings is presented for small and large unbalance loads under isothermal conditions. The radial displacements of internal pad surface due to pressure field are determined by a two-dimensional finite element method in order to define the actual film thickness. The influence of pad deformations on the journal orbit, on the minimum film thickness and on the maximum pressure is studied. The effects of pad displacements are to decrease the minimum film thickness and to increase the maximum pressure. The orbit amplitude is also increased by 20 percent for the large unbalance load compared to the one obtained for rigid pad.

Effects of double parabolic profiles with groove textures on the hydrodynamic lubrication performance of journal bearing under steady operating conditions

2020 ◽  
Vol 21 (3) ◽  
pp. 301
Author(s):  
Chongpei Liu ◽  
Wanyou Li ◽  
Xiqun Lu ◽  
Bin Zhao
Keyword(s):  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Operating Conditions ◽  
Lubricating Oil ◽  
Asperity Contact ◽  
Adiabatic Flow ◽  
Lubrication Performance ◽  
Load Carrying ◽  
Edge Wear ◽  
Journal Misalignment

The textures on the bushing surface have important effects on the performance of journal bearing. In this study, the effects of double parabolic profiles with groove textures on the hydrodynamic lubrication performance of journal bearing under steady operating conditions are investigated theoretically. The journal misalignment, asperity contact and thermal effects are considered, while the profile modifications due to running-in are neglected. The Winkler/Column model is used to calculate the elastic deformation of bushing surface and the adiabatic flow hypothesis is adopted to obtain the effective temperature of lubricating oil. The numerical solution is established by using finite difference and overrelaxation iterative methods, and the rupture zone of oil film is determined by Reynolds boundary conditions. The numerical results reveal that the double parabolic profiles with groove textures with proper location and geometric sizes can increase load carrying capacity and reduce friction loss under steady operating conditions, which effectively overcome the drawbacks of double parabolic profiles. This novel bushing profile may help to reduce the bushing edge wear and enhance the lubrication performance of journal bearing.

A numerical method to investigate the mixed lubrication performances of journal-thrust coupled bearings

2019 ◽  
Vol 71 (9) ◽  
pp. 1099-1107
Author(s):  
Guo Xiang Guo Xiang ◽  
Yanfeng Han ◽  
Renxiang Chen ◽  
Jiaxu Wang Jiaxu Wang ◽  
Ni Xiaokang
Keyword(s):  
Thrust Bearing ◽  
Load Capacity ◽  
Elastohydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Mixed Lubrication ◽  
Hydrodynamic Effect ◽  
Asperity Contact ◽  
Content Type ◽  
Lubrication Regime ◽  
Coupled Effect

Purpose This paper aims to present a numerical model to investigate the mixed lubrication performances of journal-thrust coupled bearings (or coupled bearings). Design/methodology/approach The coupled hydrodynamic effect (or coupled effect) between the journal and the thrust bearing is considered by ensuring the continuity of the hydrodynamic pressure and the flow field at the common boundary. The mixed lubrication performances of the coupled bearing are comparatively studied for the cases of considering and not considering coupled effect. Findings The simulated results show that the hydrodynamic pressure distributions for both the journal and thrust bearing are modified due to the coupled effect. The decreased load capacity of the journal bearing and the increased load capacity of the thrust bearing can be observed when the coupled effect is considered. And the coupled effect can facilitate in reducing the asperity contact load for both the journal and thrust bearing. Additionally, the interaction between the mixed lubrication behaviors, especially for the friction coefficient, of the journal and the thrust bearing is significant in the elastohydrodynamic lubrication regime, while it becomes weak in the mixed lubrication regime. Originality/value The developed model can reveal the mutual effects of the mixed lubrication behavior between the journal and the thrust bearing.

Influence of Scratches on the Performance of a Partial Journal Bearing

2008 ◽  
Author(s):  
Mihai B. Dobrica ◽  
Michel Fillon
Keyword(s):  
Film Thickness ◽  
Thermal Effects ◽  
Journal Bearing ◽  
Friction Torque ◽  
Maximum Pressure ◽  
Relative Depth ◽  
Performance Loss ◽  
Minimum Film Thickness ◽  
Overall Performance ◽  
Bearing Damage

In this paper, the influence of circumferential scratches on the thermohydrodynamic performance of a partial (lobe) journal bearing is studied. The bearing damage is characterized by four factors: the area of the scratched region, the density of the scratches within the affected area, the relative position of the scratched region and the relative depth of the wear defects. The bearing performance is characterized by minimum film thickness, average oil temperature, maximum pressure, friction torque etc., at imposed magnitude and direction of the load. A numerical hydrodynamic model with global thermal effects is used for studying the influence of the different wear related parameters on the bearing performance. The results permit to predict the overall performance loss due to the circumferential wear marks, for different wear profiles. The types of wear profiles that can lead to the bearing destruction (characterized by a critical minimum film thickness) are also investigated.

scholarly journals A Method for Monitoring Lubrication Conditions of Journal Bearings in a Diesel Engine Based on Contact Potential

2020 ◽  
Vol 10 (15) ◽  
pp. 5199
Author(s):  
Biao Wan ◽  
Jianguo Yang ◽  
Sicong Sun
Keyword(s):  
Diesel Engine ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Journal Bearings ◽  
Asperity Contact ◽  
Contact Potential ◽  
Axis Orbit ◽  
Lubrication Condition ◽  
The Relationship ◽  
Lubrication Conditions

Wear of the journal bearings in a diesel engine is usually caused by asperity contact. Increased contact potential is caused by the asperity contact between the journal bearing and the shell. This paper analyzes the relationship between the contact potential and asperity contact and presents a method based on contact potential to monitor the bearing wear caused by asperity contact. A thermo-elastic hydrodynamic lubrication (THL) model of the journal bearing on the test bench was established and was verified by measuring its axis orbit. The asperity contact proportion was calculated based on this THL model, and its relationship with the measured contact potential was determined. The main contribution of this paper is to present a new method for monitoring the lubrication conditions of journal bearings in a diesel engine based on contact potential. The results showed that (a) when the minimum oil film thickness was less than 5 μm, asperity contact occurred between the bearing shell and the journal, which led to a sharp increase in contact pressure and a rapid increase in friction power consumption. Further, (b) there was a positive correlation between contact potential and asperity contact. The contact potential was greater than 0.75 mv when asperity contact occurred. These results proved that asperity contact could be accurately monitored using the contact potential, and the feasibility of using the contact potential to monitor the lubrication condition of a bearing was verified.

Sign in / Sign up

Export Citation Format

Share Document