Numerical Investigation on Labyrinth Seal Leakage Flow and Its Effects on Aerodynamic Performance for a Multistage Centrifugal Compressor

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Bing Qiao ◽  
Yaping Ju ◽  
Chuhua Zhang
Keyword(s):  
Centrifugal Compressor ◽  
Interaction Mechanism ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Centrifugal Compressors ◽  
Labyrinth Seals ◽  
Injection Mode ◽  
Piston Seal ◽  
Mainstream Flow ◽  
Multistage Centrifugal Compressor

Labyrinth seals are widely used in industrial centrifugal compressors to reduce leakage. However, no work has been conducted to numerically investigate the detailed seal leakage flow and its effects in an environment of multistage centrifugal compressor. To clarify the flow mechanism of leakage flow and the interaction mechanism between leakage and mainstream flow in multistage centrifugal compressors, the flow of the last two stages from a four-stage centrifugal compressor is studied using computational fluid dynamics (CFD) model with and without considerations of labyrinth seal leakage paths, i.e., two shroud seals, one interstage seal, and one balance piston seal. The results show that the leakage flow in shroud and hub cavities can be described as a Batchelor-type flow. The Ekman number of the cavity Batchelor flow is small and corresponds to thin boundary layers while the Rossby number is at unity order implying the importance of rotating effects. The leakage flow through the shroud, interstage, and balance piston labyrinth seals is decreased by the combined effects of throttling and diffusion flow, and has distinctive flow structures associated with the type of labyrinth seal. The influence of leakage flow on the mainstream flow can be described by suction or injection mode. The suction mode is beneficial to the improvement of mainstream flow quality while the injection mode is harmful. This work is of scientific significance to enrich the knowledge of internal fluid mechanics and of potential application value to control and design the leakage flow in real configurations of multistage centrifugal compressors.

Influence of Labyrinth Seal Leakage on Centrifugal Compressor Performance

2009 ◽  
Author(s):  
Bob Mischo ◽  
Beat Ribi ◽  
Christof Seebass-Linggi ◽  
Sebastiano Mauri
Keyword(s):  
Centrifugal Compressor ◽  
Leading Edge ◽  
Suction Side ◽  
Labyrinth Seal ◽  
Main Flow ◽  
Low Flow ◽  
Leakage Flow ◽  
Multi Stage ◽  
Compressor Impeller ◽  
Rotating Impeller

The focus of this paper lies on the leakage flow across the shroud of a centrifugal compressor impeller. It is common practice to use shrouded impellers in multi stage compressors featuring a single shaft. The rotating impeller then has to be sealed against the higher pressure in the downstream diffuser by means of labyrinths. The relative amount of leakage is higher for stages designed for low flow, meaning that the associated losses gain in relevance. In addition to this loss source, the injection of the leakage flow has a serious influence on the main flow in a region where it is prone to separation, i.e. at the suction side of the impeller blades close to the shroud, where the highest relative velocities are found. The present paper discusses the numerical results of several geometrical arrangements where the leakage flow was mixed with the main flow in different ways. The distance between the location of injection and the leading edge of the impeller as well as the orientation of the injected flow showed a distinct influence on the performance of the entire stage, mainly on stability.

A CFD Study on the Dynamic Coefficients of Labyrinth Seals

2012 ◽  
Author(s):  
Donghui Zhang ◽  
Chester Lee ◽  
Michael Cave
Keyword(s):  
High Speed ◽  
Fluid Dynamic ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Dynamic Coefficients ◽  
Rotating Impeller ◽  
Coupling Stiffness ◽  
Direct Stiffness ◽  
Compressor Efficiency

Labyrinth seals are widely used in gas compressors to reduce internal leakage and increase the compressor efficiency. Due to the eccentricity between the rotating impeller and the stationary part as *well as the shaft whirling motion, forces are generated when the leakage flow passing through the cavities and the seals. For a lot of applications with high speed and pressure, these forces can drive the system unstable. Thus, predicting the forces accurately become a very important for compressor rotordynamic designs. A lot of research and studies has been done to the seals itself, including bulk flow method, computational fluid dynamic (CFD) and test measurement. The seal and leakage flow interaction forces can be predicted relatively accurate. But very few research treat the seal and cavities as one component interacting with the leakage flow and produce the forces. This paper presents results of CFD investigations on the dynamic coefficients of one typical impeller eye seal and front cavity. The CFD results show that large forces are generated in the front cavity due to circumferential uniform pressure distribution, which caused by the downstream labyrinth seal. The forces generated in the front cavity are more than in the front seal. It was found that the inertia, damping, and stiffness are proportional to average pressure. The cross-coupling stiffness increases with speed with power of 2 while the direct stiffness increases with speed with power of about 1.7.

Numerical Comparison of Leakage Flow and Rotordynamic Characteristics for Two Types of Labyrinth Seals With Baffles

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Yuanqiao Zhang ◽  
Jun Li ◽  
Zhigang Li ◽  
Xin Yan
Keyword(s):  
Rotational Speed ◽  
Flow Resistance ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Numerical Comparison ◽  
Vibration Frequencies ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Brush Seal ◽  
Swirl Intensity

Abstract Cavity separation baffles can decrease the circumferential swirl intensity of labyrinth seals and increase the seals' rotordynamic characteristics. Compared with conventional baffles, the bristle packs of brush seal baffles can contact the rotor directly, thereby further reducing the swirl intensity of the seal cavity. This paper, using the numerical model combining a multifrequency elliptical whirling orbit model, a porous medium model, and transient Reynolds-averaged Navier–Stokes (RANS) solutions, compares the leakage flow and rotordynamic characteristics of a labyrinth seal with brush-seal baffles (LSBSB) and a labyrinth seal with conventional baffles (LSCB). Ideal air flows into the seal at an inlet preswirl velocity of 0 m/s (or 60 m/s or 100 m/s), total pressure of 690 kPa, and temperature of 14 °C. The outlet static pressure is 100 kPa and the rotational speed is 7500 r/min (surface speed of 66.8 m/s) or 15,000 r/min (surface speed of 133.5 m/s). Numerical results show that the LSBSB possesses the slightly less leakage flow rate than the LSCB due to the flow resistance of the bristle pack to the fluid. Compared with the LSCB, the LSBSB shows a higher positive effective stiffness (Keff) at all considered vibration frequencies and a higher effective damping (Ceff) for most vibration frequencies. What is more, the crossover frequency (fc0) of the LSBSB is significantly lower than that of the LSCB, which means that the LSBSB has a wider frequency range offering positive effective damping. The increasing inlet preswirl velocity and rotational speed only slightly affect the Keff for both seals. The Ceff of two seals decreases as the inlet preswirl velocity rises, especially for the LSCB. The Ceff of the LSCB slightly decreases because of the increasing rotational speed. In contrast, the Ceff of the LSBSB is not sensitive to the changes in rotational speed. In a word, the LSBSB possesses superior rotordynamic performance to the LSCB. Note that this work also investigates the leakage flow and rotordynamic characteristics a labyrinth seal with inclined baffles (LSIB) under the condition of u0 = 60 m/s and n = 15,000 r/min. The inclined baffles of the LSIB are same as the backing plates of LSBSB baffles. The LSIB has rotordynamic coefficients almost equal to the LSCB. Hence, the reason why the LSBSB possesses better rotordynamic performance than that of the LSCB is the flow resistance of bristle packs of brush seal baffles, not the inclination direction variation of baffles.

Effects of Labyrinth Fin Wear on Aerodynamic Performance of Turbine Stages: Part I — Bending Damages

2019 ◽  
Author(s):  
Xin Yan ◽  
Xinbo Dai
Keyword(s):  
Labyrinth Seal ◽  
Flow Fields ◽  
Aerodynamic Performance ◽  
Leakage Flow ◽  
Original Design ◽  
Labyrinth Seals ◽  
Sealing Performance ◽  
Forward Bending ◽  
Design Case ◽  
Isentropic Efficiency

Abstract Labyrinth seals are widely applied in turbo machines because of their geometrical simplicity, convenient installation, reliable operation and excellent sealing performance. However, in realistic operation process, they usually encounter transient conditions (starting-up, shutting down, etc.) and unavoidable vibrations, which may cause wear in the labyrinth fins. After rubbing, the sealing performance of labyrinth seal will be varied in contrast to the original design. Correspondingly, the aerodynamic efficiency of the turbine stage will be affected by the variation of leakage flow in rubbing process. However, in published literature with respect to the labyrinth seal wear, most of the attention has been paid on revealing sealing performance degradation of labyrinth seal itself. Few studies have been concentrated on the influence of labyrinth seal wear on aerodynamic performance of turbine stages. In such background, the present paper utilizes the numerical methods to investigate the effects of labyrinth seal bending damages on aerodynamic performance of turbine stages. Firstly, under several assumptions, the bending geometrical model was established to describe different degrees of bending damages. Secondly, using three-dimensional RANS simulations, the effects of effective clearance variation due to bending on leakage flow and flow fields in turbine stages were investigated. The overall performance of the turbine stages with teeth-bending damages was also compared with the original design case. The influence of the forward bending and backward bending of labyrinth seals were analyzed and compared with each other. The total-total isentropic efficiency of turbine stages, leakage rates, outlet flow angles, reaction degrees and profile static pressure distributions, entropic distributions and flow fields in seals were obtained and compared to the original design case. The results indicate that the leakage rates in the worn labyrinth seal are quite relevant to the effective clearance, especially for the backward bending damages. As the effective clearances in backward bending cases are increased by 0.2–0.6mm, the isentropic efficiency of turbine stages is decreased by about 1–2%. However, for the forward bending damages, the aerodynamic performance and leakage rates in turbine stages are not sensitive to the effective clearance.

On the Combined Effect on Operating Range of Adjustable IGVs and Variable Speed in Process Multistage Centrifugal Compressors

2013 ◽  
Author(s):  
Alberto Scotti Del Greco ◽  
Libero Tapinassi
Keyword(s):  
Centrifugal Compressor ◽  
Control Device ◽  
Variable Speed ◽  
Centrifugal Compressors ◽  
Speed Regulation ◽  
General Rules ◽  
Wide Range ◽  
Successful Control ◽  
Mach Numbers ◽  
Multistage Centrifugal Compressor

Adjustable inlet guide vanes (IGVs) and variable speed drivers are known as providing process compressors with an effective regulation all throughout the operating envelope of the machine. A large number of works exists in literature reporting the successful control of multistage centrifugal compressors by means of IGVs or speed separately, while a few studies document the combined use of both devices and their effect on compressor performance. The present paper details the off-design behavior of a multistage centrifugal compressor equipped with both types of control. It is shown that classical IGVs advantage in extending the operating envelope of a fixed speed multistage compressor tends to reduce when speed regulation is active too. In this sense, the average level of peripheral Mach numbers inside the compressor may be interpreted as a sort of threshold, since it deeply affects the stage mismatching at off-design conditions. This consideration is corroborated by a number of applications in a wide range of design peripheral Mach numbers. Based on those cases, the paper reviews the general effectiveness of the combined regulation, thus outlining some general rules of thumb for the choice of the optimal control device for a multistage centrifugal compressor.

Performance evaluation of the inter-stage labyrinth seal for different tooth positions in an axial compressor

2017 ◽  
Vol 232 (6) ◽  
pp. 579-592 ◽  
Author(s):  
Xiaozhi Kong ◽  
Gaowen Liu ◽  
Yuxin Liu ◽  
Zhao Lei ◽  
Longxi Zheng
Keyword(s):  
Axial Compressor ◽  
Labyrinth Seal ◽  
Tip Clearance ◽  
Test Facility ◽  
Leakage Flow ◽  
Rotating Disc ◽  
Labyrinth Seals ◽  
Leakage Flows ◽  
Sealing Performance ◽  
Set Up

Labyrinth seals are normally used to control the leakage flow in the compressor stator well. The upstream and downstream rotor-stator cavities of the labyrinth seal can cause complex reverse leakage flows. Remarkable temperature increases and high swirl velocities are observed in this region. In addition, another characteristic of inter-stage labyrinth seal is that large expansions of rotor and stator may easily lead to severely rubbing between the teeth and shrouds, which can shorten the lifetime of the compressor obviously. Experiments were conducted at a rotating compressor inter-stage seal test facility. Different labyrinth rings were tested to compare the performances of inter-stage labyrinth seals with different tooth positions. Leakage flow rates, windage heating and swirl ratios in the outlet cavity were measured at different rotating speeds and pressure ratios. In order to get the working tip clearance accurately, the set up tip clearance was measured with plug gauges, while the radial displacements of rotating disc and stationary casing were measured separately with two high precision laser distance sensors. Numerical simulations were carried out to present the important flow physics responsible for the effects of different tooth positions. In this article, performances of different cases for single, double and triple teeth were investigated and the experimental data provide a new way for the design of inter-stage seals. This method can reduce the leakage flow and avoid severely rubbing at the same time by changing axial positions of teeth in the stator well. When teeth are placed downstream of the model and the tooth pitch is larger, the inter-stage seal would have better sealing performance. For triple teeth cases, N = 3-Case1 has the lowest discharge coefficients, 15% less than that of N = 3-Baseline.

scholarly journals Effects of Double-Side Labyrinth Seals on Aerodynamic Performance in a Transonic Shrouded Turbine Stage

2020 ◽  
Vol 142 (2) ◽  
Author(s):  
Weihang Li ◽  
Shaowen Chen ◽  
Hongyan Liu ◽  
Zhihua Zhou ◽  
Songtao Wang
Keyword(s):  
Labyrinth Seal ◽  
Aerodynamic Performance ◽  
Maximum Efficiency ◽  
Outlet Section ◽  
Leakage Flow ◽  
Turbine Stage ◽  
Tip Leakage Flow ◽  
Labyrinth Seals ◽  
Tip Leakage ◽  
Transonic Turbine

Abstract Labyrinth seals on both rotor casing and blade tip as an effective method to control the leakage flowrate of the shroud and improve aerodynamic performances in a transonic turbine stage are investigated in this study. Compared to the case without the labyrinth seal structure, the cases with three different types of sealing teeth have been shown to reduce significantly the tip leakage flow by computational simulations. The double-side sealing teeth case reduces the leakage flowrate mleakage/mpassage from 3.4% to 1.3% and increases the efficiency by 1.4%, which is the maximum efficiency improvement of all cases. The sealing structures increase the loss inside the shroud while reducing the momentum mixing between shroud leakage flow and mainstream. Therefore, the circumferential distribution of leakage velocity is changed, as well as the distribution of high-loss zones at turbine outlet. Furthermore, the leakage-vortex loss, which is associated with the blockage effect of sealing structure to the tip leakage flow, gains more improvement than the passage-vortex at the rotor outlet section in double-side seal case. In addition, it has also been found that with a larger gap at tip, the double-side seal has better effects of reducing the leakage flow and improving the aerodynamic performance in the transonic turbine stage.

Development of a New Loss Model for Turbomachinery Labyrinth Seals

2021 ◽  
Author(s):  
Davendu Y. Kulkarni ◽  
Luca di Mare
Keyword(s):  
Flow Rate ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Stream Tube ◽  
Flow Area ◽  
Loss Model ◽  
Seal Design ◽  
Wide Range ◽  
Numerical Experimentation

Abstract The preliminary design of labyrinth seals requires a fast and accurate estimate of the leakage flow. While the conventional bulk flow models can quickly predict labyrinth seal discharge characteristics, they lack the accuracy and pragmatism of modern CFD technique and vice-a-versa. This paper presents a new 1D loss model for straight-through gas labyrinth seals that can provide quick seal leakage flow predictions with CFD-equivalent accuracy. The present seal loss model is developed using numerical experimentation technique. Multiple CFD computations are conducted on straight-through labyrinth seal geometries for a range of pressure ratios. A distinct post-processing methodology is developed to extract the through-flow stream tube in seal. Total pressure losses and flow area variations experienced by the flow in seal stream-tube are systematically accounted for based on the well-known knife-to-knife (K2K) methodology. Regression analyses are conducted on the trends of variations of loss and area coefficients to derive the independent pressure loss and flow area correlations. These novel correlations can predict the bulk leakage flow rate, windage flow rate and inter-knife static pressures over a wide range of variation of flow and geometry parameters. Validation study shows that the leakage mass flow rate predicted by this model is accurate within ±8% of measured test data. This fast and accurate model can be employed for various applications such as, in seal design-analysis workflows, for secondary air system (SAS) performance analysis and for the rotor-dynamic and aeroelastic assessments of seals.

Application of Computational Fluid Dynamics Analysis for Rotating Machinery—Part II: Labyrinth Seal Analysis

2005 ◽  
Vol 127 (4) ◽  
pp. 820-826 ◽  
Author(s):  
Toshio Hirano ◽  
Zenglin Guo ◽  
R. Gordon Kirk
Keyword(s):  
Research Work ◽  
Flow Analysis ◽  
Labyrinth Seal ◽  
Bulk Flow ◽  
Working Fluid ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Eccentric Rotor ◽  
Computational Fluid Dynamics Analysis ◽  
Force Components

Labyrinth seals are used in various kinds of turbo machines to reduce internal leakage flow. The working fluid, or the gas passing through the rotor shaft labyrinth seals, often generates driving force components that may increase the unstable vibration of the rotor. It is important to know the accurate rotordynamic force components for predicting the instability of the rotor-bearing-seal system. The major goals of this research were to calculate the rotordynamic force of a labyrinth seals utilizing a commercial CFD program and to further compare those results to an existing bulk flow computer program currently used by major US machinery manufacturers. The labyrinth seals of a steam turbine and a compressor eye seal are taken as objects of analysis. For each case, a 3D model with eccentric rotor was solved to obtain the rotordynamic force components. The leakage flow and rotor dynamics force predicted by CFX TASCFlow are compared with the results of the existing bulk flow analysis program DYNLAB. The results show that the bulk flow program gives a pessimistic prediction of the destabilizing forces for the conditions under investigation. Further research work will be required to fully understand the complex leakage flows in turbo machinery.

Time-Resolved Numerical Investigation of the Interaction of Labyrinth Seal Leakage and Main-Flow in a 1.5-Stage LP Turbine

2011 ◽  
Author(s):  
Marc H.-O. Biester ◽  
Lasse Mueller ◽  
Joerg R. Seume ◽  
Yavuz Guendogdu
Keyword(s):  
Turbine Blades ◽  
Three Dimensional ◽  
Vortex Pair ◽  
Labyrinth Seal ◽  
Main Flow ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Time Resolved ◽  
Lp Turbine ◽  
German Aerospace

In axial turbomachinery such as low pressure turbines, shrouded airfoils with labyrinth seals are commonly used. Among different sealing options, labyrinth seals in particular are characterized by long term durability and high sealing efficiency. Since a leakage flow is inevitable, a thorough understanding of how the leakage flow exits the cavities, its interaction with the main flow, and the induction of losses is necessary. In order to take into account unsteady effects, three-dimensional time resolved RANS computations of a 1.5 stage LPT rig in its design operating point are conducted. To capture effects in the boundary layer, a low Reynolds approach is used at the blade surface as well as on the hub and tip surfaces. To match the real geometry of the turbine blades, fillets have been modeled. Simulations were performed using the TRACE solver developed by the German Aerospace Center (DLR). The investigation shows how cavity flows have a significant influence on the main-flow aerodynamics and the loss generation. Steady and unsteady results with full spatially discretized cavities show a significant decrease of isentropic efficiency compared to simulations without cavities. The efficiency drop for the steady and time-averaged cavity computations can be explained with intensified secondary flow. The time resolved calculation shows a strong non-uniformity of the leakage flux depending on the instantaneous circumferential position of the up- and downstream blades. The time dependent ingress of cavity leakage results in the formation of a counter-rotating vortex pair. In terms of the influence on the main flow, it is shown that the interaction is limited to the end walls with almost no influence on the midspan flow.

Sign in / Sign up

Export Citation Format

Share Document