Interpreting Idea Maps: Pairwise Comparisons Reveal What Makes Ideas Novel

2018 ◽  
Vol 141 (2) ◽  
Author(s):  
Faez Ahmed ◽  
Sharath Kumar Ramachandran ◽  
Mark Fuge ◽  
Samuel Hunter ◽  
Scarlett Miller

Assessing similarity between design ideas is an inherent part of many design evaluations to measure novelty. In such evaluation tasks, humans excel at making mental connections among diverse knowledge sets to score ideas on their uniqueness. However, their decisions about novelty are often subjective and difficult to explain. In this paper, we demonstrate a way to uncover human judgment of design idea similarity using two-dimensional (2D) idea maps. We derive these maps by asking participants for simple similarity comparisons of the form “Is idea A more similar to idea B or to idea C?” We show that these maps give insight into the relationships between ideas and help understand the design domain. We also propose that novel ideas can be identified by finding outliers on these idea maps. To demonstrate our method, we conduct experimental evaluations on two datasets—colored polygons (known answer) and milk frother sketches (unknown answer). We show that idea maps shed light on factors considered by participants in judging idea similarity and the maps are robust to noisy ratings. We also compare physical maps made by participants on a white-board to their computationally generated idea maps to compare how people think about spatial arrangement of design items. This method provides a new direction of research into deriving ground truth novelty metrics by combining human judgments and computational methods.

Author(s):  
Faez Ahmed ◽  
Mark Fuge ◽  
Sam Hunter ◽  
Scarlett Miller

Assessing similarity between design ideas is an inherent part of many design evaluations to measure novelty. In such evaluation tasks, humans excel at making mental connections among diverse knowledge sets and scoring ideas on their uniqueness. However, their decisions on novelty are often subjective and difficult to explain. In this paper, we demonstrate a way to uncover human judgment of design idea similarity using two dimensional idea maps. We derive these maps by asking humans for simple similarity comparisons of the form “Is idea A more similar to idea B or to idea C?” We show that these maps give insight into the relationships between ideas and help understand the domain. We also propose that the novelty of ideas can be estimated by measuring how far items are on these maps. We demonstrate our methodology through the experimental evaluations on two datasets of colored polygons (known answer) and milk frothers (unknown answer) sketches. We show that these maps shed light on factors considered by raters in judging idea similarity. We also show how maps change when less data is available or false/noisy ratings are provided. This method provides a new direction of research into deriving ground truth novelty metrics by combining human judgments and computational methods.


2020 ◽  
Vol 29 (3S) ◽  
pp. 631-637
Author(s):  
Katja Lund ◽  
Rodrigo Ordoñez ◽  
Jens Bo Nielsen ◽  
Dorte Hammershøi

Purpose The aim of this study was to develop a tool to gain insight into the daily experiences of new hearing aid users and to shed light on aspects of aided performance that may not be unveiled through standard questionnaires. Method The tool is developed based on clinical observations, patient experiences, expert involvement, and existing validated hearing rehabilitation questionnaires. Results An online tool for collecting data related to hearing aid use was developed. The tool is based on 453 prefabricated sentences representing experiences within 13 categories related to hearing aid use. Conclusions The tool has the potential to reflect a wide range of individual experiences with hearing aid use, including auditory and nonauditory aspects. These experiences may hold important knowledge for both the patient and the professional in the hearing rehabilitation process.


2020 ◽  
pp. 128-138
Author(s):  
A. S. Bik-Bulatov

The article uses little known letters of M. Gorky, many of which were published for the first time in 1997, as well as findings of Samara-based experts in local history to shed light on the writer’s work as editor-in-chief of the Samarskaya Gazeta newspaper in 1895. The researcher introduces hitherto unstudied reminiscences of the journalist D. Linyov (Dalin) about this period, which reference a letter by Gorky, now lost. The paper details a newly discovered episode of Gorky’s professional biography as a journalist: it concerns his campaign against a Samara ‘she-wolf,’ the madam of a local brothel A. Neucheva. Linyov’s reminiscences turn out to be an important and interesting source, offering an insight into the daily grind of the young editor Gorky, providing new evidence of his excellent organizational skills, and describing his moral and social stance. The author presents his work in the context of a recently initiated broader discussion about the need to map out all Russian periodicals for the period until 1917, as well as all research devoted to individual publications.


Author(s):  
Serhad Sarica ◽  
Binyang Song ◽  
Jianxi Luo ◽  
Kristin L. Wood

Abstract There are growing efforts to mine public and common-sense semantic network databases for engineering design ideation stimuli. However, there is still a lack of design ideation aids based on semantic network databases that are specialized in engineering or technology-based knowledge. In this study, we present a new methodology of using the Technology Semantic Network (TechNet) to stimulate idea generation in engineering design. The core of the methodology is to guide the inference of new technical concepts in the white space surrounding a focal design domain according to their semantic distance in the large TechNet, for potential syntheses into new design ideas. We demonstrate the effectiveness in general, and use strategies and ideation outcome implications of the methodology via a case study of flying car design idea generation.


2020 ◽  
Vol 8 (11) ◽  
pp. 1633
Author(s):  
Mohamed F. Abdallah ◽  
Kris Audenaert ◽  
Sarah De Saeger ◽  
Jos Houbraken

The aflatoxin type B and G producer Aspergillus novoparasiticus was described in 2012 and was firstly reported from sputum, hospital air (Brazil), and soil (Colombia). Later, several survey studies reported the occurrence of this species in different foods and other agricultural commodities from several countries worldwide. This short communication reports on an old fungal strain (CBS 108.30), isolated from Pseudococcus sacchari (grey sugarcane mealybug) from an Egyptian sugarcane field in (or before) 1930. This strain was initially identified as Aspergillus flavus; however, using the latest taxonomy schemes, the strain is, in fact, A. novoparasiticus. These data and previous reports indicate that A. novoparasiticus is strongly associated with sugarcane, and pre-harvest biocontrol approaches with non-toxigenic A. novoparasiticus strains are likely to be more successful than those using non-toxigenic A. flavus strains. Further studies on the association between A. novoparasiticus and Pseudococcus sacchari might shed light on the distribution (and aflatoxin contamination) of this species in sugarcane. Additionally, the interaction between A. novoparasiticus, Pseudococcus sacchari, and sugarcane crop under different scenarios of climate change will be critical in order to get more insight into the host–pathogen interaction and host resistance and propose appropriate prevention strategies to decrease mycotoxin contamination and crop loss due to A. novoparasiticus attack.


2021 ◽  
pp. 194-214
Author(s):  
D. V. Zakharov

The article is devoted to the epistolary legacy of Nelle Harper Lee, the author of the American cult classic To Kill a Mockingbird (1960). The researcher examines a collection of Nelle’s letters written from 1956 to 2009, provides a detailed list of sources and makes suggestions about the potential new discoveries that could shed light on the life of ‘America’s most reclusive author.’ This short study of ‘posthumous baggage,’ as Lee referred to her private correspondence, offers an insight into the interests of the author, who insisted on keeping her personal life to herself. The letters included in the study concern the writer’s relationship to her father Amasa Coleman Lee, on whom she based the character of Atticus Finch, her attitude to her own biography published by Charles Shields, and personal anxieties of her final years. The author also details Lee’s opinions of literature, from the 19th-c. classics to contemporary authors, and shows how much she valued communication with her numerous fans.


2021 ◽  
pp. 079160352110684
Author(s):  
Patti O’Malley

The multiracial family and the existence of mixed race children have come to be a regular feature of Irish familial life. Yet, nation-building discourses have promulgated notions of ethnic and religious homogeneity with Irish identity being racialised exclusively as white. Moreover, to date, there has been a dearth of academic scholarship related to racial mixedness in the Irish context. Through in-depth interviews, this paper sets out, therefore, to provide empirical insight into the lives of fifteen black (African) – white (Irish) mixed race young people (aged 4 to 18) with a particular focus on their experiences of racialised exclusion. Indeed, findings suggest that, as in other majority white national contexts, the black-white mixed race young people are racialised as black in the Irish public domain and as such, are positioned as ‘racialised outsiders’. In fact, their narrative accounts shed light on everyday encounters saturated by ‘us-them’ racial constructs based on phenotype. Thus, these young people, who are not fully recognised as mixed race Irish citizens, are effectively deprived of a space in which to articulate their belonging within the existing statist (i.e. inside/outside) framework.


Author(s):  
Andung Jati Nugroho ◽  
Erma Kusumaningsih ◽  
Ferida Yuamita ◽  
Aldi Yoga Pradana

The case in the metal casting process is when the metal is melted and then poured into a liquid metal reservoir and then poured into a pouring tool and then poured into a mold. In the process of pouring into the mold is still using manual equipment, namely by using wood which ends have a container such as a bucket ( bucket)) made of a mixture of white cement, brick fire sand and clay and the metal liquid pouring tool has a length of 1.5 cm, a weight of 5 kg with a diameter of 15 cm and a height of a container for liquid metal 20 cm does not include the load. If the pouring device filling with liquid metal, then the weight reaches ± 20 kg, with a weight of ± 20 kg the worker must pour the liquid continuously into the mold and at least each worker must go back and forth 6 times pouring metal liquid into a mold in a single combustion process. Based on the nordic body map questionnaire data as many as 8 workers felt pain in the shoulder and arm because the burden was born, resulting in workers often feel pain in the muscles of the arms and back. Because the wooden handle used to pour metal liquid is too slippery (exposed to sweat), so there is a need for improvement in activities. From the results of the above observations, it is necessary to design ideas for new work facilities. It expects to affect the improvements related to the position of the hand in the process of pouring liquid into the mold. Then the design idea needs to be done in the form of a casting tool that has been modified and can be used according to user needs and can be said to be ergonomic, safe, and comfortable. The method used in designing castings is quality function deployment and anthropometric techniques.


Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 3120 ◽  
Author(s):  
Shanshan Hu ◽  
Huaiyang Wang ◽  
Yong Wang ◽  
Zhengshi Liu

A novel elastic body design idea of six-axis wrist force sensor with a floating beam was raised based on the analysis of the robot six-axis wrist force sensor with a floating beam. The design ideas improve the sensor’s dynamic performance significantly, while not reducing its sensitivity. First, the design ideas were described in detail, which were analyzed by mechanical modeling and were verified by finite element analysis. Second, the static simulation analysis of the novel elastomer of sensor was carried out. According to the strain distribution performance, the position of the strain gauges pasted and the connection mode of the full-bridge circuits were decided, which can achieve theoretical decoupling. Finally, the comparison between the static and dynamic performance of the novel sensor and the original sensor with floating beams was done. The results show that the static and dynamic performance of the novel six-axis wrist sensor are all better than the original sensor.


Author(s):  
Victoria Zhao ◽  
Conrad S. Tucker

Information is transferred through a process consisting of an information source, a transmitter, a channel, a receiver and its destination. Unfortunately, during different stages of the engineering design process, there is a risk of a design idea or solution being incorrectly interpreted due to the nonlinearity of engineering design. I.e., there are many ways to communicate a single design idea or solution. This paper provides a comprehensive review and categorization of the possible sources of information loss at different stages of the engineering design process. Next, the authors present an approach that seeks to minimize information loss during certain stages of the engineering design process. The paper i) explores design process and dissemination methods in engineering design; ii) reviews prior work pertaining to these stages of the engineering design process and iii) proposes an information entropy metric that designers can utilize in order to quantify information loss at different stages of the engineering design process. Knowledge gained from this work will aid designers in selecting a suitable dissemination solution needed to effectively achieve a design solution.


Sign in / Sign up

Export Citation Format

Share Document