Stress-State, Temperature, and Strain Rate Dependence of Vintage ASTM A7 Steel

2018 ◽  
Vol 141 (2) ◽  
Author(s):  
S. A. Brauer ◽  
W. R. Whittington ◽  
H. Rhee ◽  
P. G. Allison ◽  
D. E. Dickel ◽  
...  
Keyword(s):  
Stress State ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Rate Sensitivity ◽  
Rate Dependence ◽  
Maximum Strength ◽  
Strain Rate Dependence ◽  
Dynamic Strain ◽  
Strength Increase ◽  
Negative Strain Rate Sensitivity

The structure–property relationships of a vintage ASTM A7 steel is quantified in terms of stress state, temperature, and strain rate dependence. The microstructural stereology revealed primary phases to be 15.8% ± 2.6% pearlitic and 84.2% ± 2.6 ferritic with grain sizes of 13.3 μm ± 3.1 μm and 36.5 μm ± 7.0 μm, respectively. Manganese particle volume fractions represented 0.38–1.53% of the bulk material. Mechanical testing revealed a stress state dependence that showed a maximum strength increase of 85% from torsion to tension and a strain rate dependence that showed a maximum strength increase of 38% from 10−1 to 103 s−1at 20% strain. In tension, a negative strain rate sensitivity (nSRS) was observed in the quasi-static rate regime yet was positive when traversing from the quasi-static rates to high strain rates. Also, the A7 steel exhibited a significant ductility reduction as the temperature increased from ambient to 573 K (300 °C), which is uncommon for metals. The literature argues that dynamic strain aging (DSA) can induce the negative strain rate sensitivity and ductility reduction upon a temperature increase. Finally, a tension/compression stress asymmetry arises in this A7 steel, which can play a significant role since bending is prevalent in this ubiquitous structural material. Torsional softening was also observed for this A7 steel.

Ductility Response of Ni3Al-Zr-B Base Alloys with Ternary Elements to Strain Rate and High Temperature

1996 ◽  
Vol 460 ◽  
Author(s):  
Yinmin Wang ◽  
Dongliang Lin ◽  
T. L. Lin ◽  
Yun Zhang
Keyword(s):  
High Temperature ◽  
Beneficial Effect ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Rate Sensitivity ◽  
Rate Dependence ◽  
Strain Rate Dependence ◽  
High Temperature Range ◽  
Temperature Range ◽  
Peak Value

ABSTRACTThe compressive ductilities of Ni3Al-Zr-B base alloys with sole addition of magnesium (0.02∼0.06wt.%) and combined addition of magnesium(0.02wt.%) and silicon(0.54∼1.08wt.%) respectively responding to strain rate rising from 10-4sec-1 to 10-1 sec-1 have been studied in a high temperature range of 1073∼1273K. The results show that the compressive strains at rupture(CSR) of the alloys have been greatly improved by sole addition of magnesium and the alloys with combined addition of magnesium and silicon reveal even higher CSR values, furthermore, at temperatures of 1073K and 1273K, the strain rate dependence of CSR reveals to be anomalous, i.e, the CSR value increases as the strain rate rises, and then declines until it surpasses the peak value, which is corresponded to the strain rate of 10-3 sec-1 and 10-3 sec-1 respectively.The beneficial effect of magnesium and silicon exists in their competence of reducing strain rate sensitivity exponent values. The mechanisms of the anomalous ductilizing behavior in the Ni3Al as affected by ternary elements are discussed.

Amplitude Equation for a Dynamic Strain Aging Model: Beyond Linear Stability Analysis of Serrated Flow in Metallic Alloys

2000 ◽  
Vol 652 ◽  
Author(s):  
Sergey N. Rashkeev ◽  
Michael V. Glazov ◽  
Frédéric Barlat ◽  
Daniel J. Lege
Keyword(s):  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Qualitative Difference ◽  
Rate Sensitivity ◽  
Sudden Onset ◽  
Dynamic Strain ◽  
Strain Rates ◽  
Serrated Flow ◽  
Negative Strain Rate Sensitivity ◽  
First Case

ABSTRACTA method for construction of “processing windows” to avoid negative strain rate sensitivity and associated serrated flow in some aluminum alloys is described. The method is based on the amplitude Ginzburg-Landau (GL) equations and analysis of bifurcation diagrams. The mathematical technique developed in the present work was applied to a specific aluminum alloy, Al-0.4%Mg-0.2%Si considered earlier in the literature [1-3], and yielded good results in terms of predicting the negative strain rate sensitivity regions in the “strain rate “temperature” parameter space. Using the GL-analysis it was demonstrated that even though the instability area is located in the region of intermediate strain rates, a qualitative difference exists between the areas of (relatively) fast and (relatively) slow strain rates. In the first case the dynamic behavior of the system is supercritical, in the second case it is subcritical. The second case is highly undesirable because it causes a sudden onset of stable stress serrations that are difficult to suppress, while in the first case the development of instability is gradual and, consequently, more easily controllable.

Incorporation of Dynamic Strain Aging Into a Viscoplastic Self-Consistent Model for Predicting the Negative Strain Rate Sensitivity of Hadfield Steel

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
B. Bal ◽  
B. Gumus ◽  
D. Canadinc
Keyword(s):  
Strain Rate ◽  
Strain Hardening ◽  
Strain Rate Sensitivity ◽  
Strain Aging ◽  
Rate Sensitivity ◽  
Atomic Level ◽  
Hadfield Steel ◽  
Dynamic Strain ◽  
Deformation Response ◽  
Negative Strain Rate Sensitivity

A new multiscale modeling approach is proposed to predict the contributions of dynamic strain aging (DSA) and the resulting negative strain rate sensitivity (NSRS) on the unusual strain-hardening response of Hadfield steel (HS). Mechanical response of HS was obtained from monotonic and strain rate jump experiments under uniaxial tensile loading within the 10−4 to 10−1 s−1 strain rate range. Specifically, a unique strain-hardening model was proposed that incorporates the atomic-level local instabilities imposed upon by the pinning of dislocations by diffusing carbon atoms to the classical Voce hardening. The novelty of the current approach is the computation of the shear stress contribution imposed on arrested dislocations leading to DSA at the atomic level, which is then implemented to the overall strain-hardening rule at the microscopic level. The new model not only successfully predicts the role of DSA and the resulting NSRS on the macroscopic deformation response of HS but also opens the venue for accurately predicting the deformation response of rate-sensitive metallic materials under any given loading condition.

scholarly journals Effect of Aging Process on the Strain Rate Sensitivity in V-Containing TWIP Steel

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 126
Author(s):  
Shaoheng Sun ◽  
Zhiyong Xue
Keyword(s):  
Tensile Strength ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Strain Aging ◽  
Aging Process ◽  
Vanadium Carbide ◽  
Twip Steel ◽  
Rate Sensitivity ◽  
Dynamic Strain ◽  
Negative Strain Rate Sensitivity

The dynamic tensile behavior of the twinning-induced plasticity (TWIP) steel with the vanadium carbide is investigated at different strain rates of 10−4, 10−3, 10−2 and 0.05 s−1. Microstructure characterization, carried out using back scatter electron diffraction (EBSD) and transmission electron microscopy (TEM), shows a homogeneous face center cubic structured matrix with uniformly dispersed vanadium carbide. The vanadium carbide is controlled by the aging temperature and time. The best comprehensive mechanical properties are achieved when the tested steel is aged at 550 °C for 5 h. With the increase of strain rate, the tensile strength and work hardening rate decrease, and the tested material shows negative strain rate sensitivity. This would be due to an increase in stacking fault energy caused by temperature rise by adiabatic heating, which must suppress the formation of twinning. On the other hand, the strain rate sensitivity is affected by dynamic strain aging (DSA). With the increase of strain rate, the DSA weakens, which causes negative strain rate sensitivity. The tensile strength and strain rate sensitivity value both increase first and then decrease with the increase of vanadium carbide size. This is because the tensile strength is mainly affected by the vanadium carbide. In addition to the vanadium carbide, the strain rate sensitivity is also affected by the amount of solute atom (V and C) during the dynamic strain aging process.

scholarly journals Negative Strain Rate Sensitivity Induced by Structure Heterogeneity in Zr64.13Cu15.75Ni10.12Al10 Bulk Metallic Glass

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 339
Author(s):  
Xiang Wang ◽  
Zhi Qiang Ren ◽  
Wei Xiong ◽  
Si Nan Liu ◽  
Ying Liu ◽  
...  
Keyword(s):  
Metallic Glass ◽  
Strain Rate ◽  
Bulk Metallic Glass ◽  
Strain Rate Sensitivity ◽  
Critical Role ◽  
Rate Sensitivity ◽  
Confined Compression ◽  
Negative Strain Rate Sensitivity ◽  
Cast Specimen ◽  
Structure Heterogeneity

The negative strain rate sensitivity (SRS) of metallic glasses is frequently observed. However, the physical essence involved is still not well understood. In the present work, small-angle X-ray scattering (SAXS) and high-resolution transmission electron microscopy (HRTEM) reveal the strong structure heterogeneity at nanometer and tens of nanometer scales, respectively, in bulk metallic glass (BMG) Zr64.13Cu15.75Ni10.12Al10 subjected to fully confined compression processing. A transition of SRS of stress, from 0.012 in the as-cast specimen to −0.005 in compression processed specimen, was observed through nanoindentation. A qualitative formulation clarifies the critical role of internal stress induced by structural heterogeneity in this transition. It reveals the physical origin of this negative SRS frequently reported in structurally heterogeneous BMG alloys and its composites.

Sign in / Sign up

Export Citation Format

Share Document