scholarly journals Numerical Simulation of JCO-E Pipe Manufacturing Process and Its Effect on the External Pressure Capacity of the Pipe1

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Konstantinos Antoniou ◽  
Giannoula Chatzopoulou ◽  
Spyros A. Karamanos ◽  
Athanasios Tazedakis ◽  
Christos Palagas ◽  
...  
Keyword(s):  
Manufacturing Process ◽  
Large Diameter ◽  
Welding Process ◽  
Structural Instability ◽  
External Pressure ◽  
Forming Process ◽  
Line Pipe ◽  
Geometric Deviations ◽  
Large Diameter Pipes ◽  
Pipe Manufacturing

Large-diameter thick-walled steel pipes during their installation in deep-water are subjected to external pressure, which may trigger structural instability due to pipe ovalization, with detrimental effects. The resistance of offshore pipes against this instability is affected by local geometric deviations and residual stresses, introduced by the line pipe manufacturing process. In the present paper, the JCO-E pipe manufacturing process, a commonly adopted process for producing large-diameter pipes of significant thickness, is examined. The study examines the effect of JCO-E line pipe manufacturing process on the external pressure resistance of offshore pipes, candidates for deepwater applications using nonlinear finite element simulation tools. The cold bending induced by the JCO forming process as well as the subsequent welding and expansion (E) operations are simulated rigorously. Subsequently, the application of external pressure is modeled until structural instability (collapse) is detected. Both the JCO-E manufacturing process and the external pressure response of the pipe, are modeled using a two-dimensional (2D) generalized plane strain model, together with a coupled thermo-mechanical model for simulating the welding process.

Numerical Simulation of JCO Pipe Forming Process and its Effect on the External Pressure Capacity of the Pipe

2017 ◽  
Author(s):  
Giannoula Chatzopoulou ◽  
Konstantinos Antoniou ◽  
Spyros A. Karamanos
Keyword(s):  
Manufacturing Process ◽  
Large Diameter ◽  
Structural Response ◽  
Structural Instability ◽  
External Pressure ◽  
Forming Process ◽  
Line Pipe ◽  
Structural Capacity ◽  
Large Diameter Pipes ◽  
Pipe Manufacturing

Large-diameter thick-walled steel pipes during their installation in deep-water are subjected to external pressure, which may trigger structural instability due to excessive pipe ovalization with catastrophic effects. The resistance of offshore pipes against this instability mode strongly depends on imperfections and residual stresses introduced by the line pipe manufacturing process. In the present paper, the JCO pipe manufacturing process, a commonly adopted process for producing large-diameter pipes of significant thickness, is examined. The study examines the effect of JCO line pipe manufacturing process on the structural response and resistance of offshore pipes during the installation process using nonlinear finite element simulation tools. At first, the cold bending induced by the JCO process is simulated rigorously, and subsequently, the application of external pressure is modeled until structural instability is detected. For the simulation of the JCO manufacturing process and the structured response of the pipe a two dimensional generalized plane strain model is used. Furthermore, a numerical analysis is also conducted on the effects of line pipe expansion on the structural capacity of the JCO pipe.

Numerical Simulation of UOE Pipe Process and its Effect on Pipe Mechanical Behavior in Deep-Water Applications

2015 ◽  
Author(s):  
Giannoula Chatzopoulou ◽  
Spyros A. Karamanos ◽  
George E. Varelis
Keyword(s):  
Deep Water ◽  
Manufacturing Process ◽  
Large Diameter ◽  
Structural Response ◽  
Structural Instability ◽  
External Pressure ◽  
Line Pipe ◽  
Simulation Tools ◽  
Large Diameter Pipes ◽  
Pipe Manufacturing

Large-diameter thick-walled steel pipes during their installation in deep-water are subjected to a combination of loading in terms of external pressure, bending and axial tension, which may trigger structural instability due to excessive pipe ovalization with catastrophic effects. In the present study, the UOE pipe manufacturing process, commonly adopted for producing large-diameter pipes of significant thickness, is considered. The study examines the effect of UOE line pipe manufacturing process on the structural response and resistance of offshore pipes during the installation process using nonlinear finite element simulation tools.

Optimization of UOE Pipe Manufacturing Process for Improved Collapse Performance Under External Pressure

2006 ◽  
Author(s):  
Stelios Kyriakides ◽  
Mark D. Herynk ◽  
Heedo Yun
Keyword(s):  
Mechanical Properties ◽  
Parametric Study ◽  
Large Diameter ◽  
External Pressure ◽  
Material Degradation ◽  
Forming Process ◽  
Cold Forming ◽  
Collapse Pressure ◽  
Large Diameter Pipes ◽  
Pipe Manufacturing

Large-diameter pipes used in offshore applications are commonly manufactured by cold-forming plates through the UOE process. Collapse experiments have demonstrated that these steps, especially the final expansion, degrade the mechanical properties of the pipe and result in a reduction in its collapse pressure, upwards of 30%. In this study, the UOE forming process has been modeled numerically so that the effects of press parameters of each forming step on the final geometry and mechanical properties of the pipe can be established. The final step involves simulation of pipe collapse under external pressure. An extensive parametric study of the problem has been conducted, through which ways of optimizing the process for improved collapse performance have been established. For example, it was found that optimum collapse pressure requires a tradeoff between pipe shape (ovality) and material degradation. Generally, increase in the O-strain and decrease in the expansion strain improve the collapse pressure. Substituting the expansion by compression can not only alleviate the UOE collapse pressure degradation but can result in a significant increase in collapse performance.

Effects of UOE Manufacturing Process on Pressurized Bending Response of Offshore Pipes

2014 ◽  
Author(s):  
Giannoula Chatzopoulou ◽  
Spyros A. Karamanos ◽  
George E. Varelis
Keyword(s):  
Manufacturing Process ◽  
Cost Effective ◽  
Structural Instability ◽  
External Pressure ◽  
Line Pipe ◽  
Steel Pipes ◽  
Simulation Tools ◽  
Bending Loads ◽  
Water Pipeline ◽  
Bending Response

Thick-walled steel pipes manufactured through the UOE process are used in deep-water pipeline applications for the safe and cost-effective transmission of hydrocarbon energy resources. Such pipes are subjected to bending loads in the presence of high external pressure during their installation stage. The combination of bending and external pressure often triggers the development of structural instability due to excessive ovalization of the pipe with catastrophic effects. In the present study, the effect of UOE line pipe manufacturing process on the bending response of externally-pressurized thick-walled pipes is examined, using finite element simulation tools.

scholarly journals The Effect of Spiral Cold-Bending Manufacturing Process on Pipeline Mechanical Behavior

2016 ◽  
Author(s):  
Giannoula Chatzopoulou ◽  
Gregory C. Sarvanis ◽  
Chrysanthi I. Papadaki ◽  
Spyros A. Karamanos
Keyword(s):  
Internal Pressure ◽  
Manufacturing Process ◽  
Numerical Models ◽  
Large Diameter ◽  
External Pressure ◽  
Forming Process ◽  
Cold Forming ◽  
Cold Bending ◽  
Offshore Pipeline ◽  
Bending Capacity

Large-diameter spiral-welded pipes are employed in demanding hydrocarbon pipeline applications, which require an efficient strain-based design framework. In the course of a large European project, numerical simulations on spiral-welded pipes are conducted to examine their bending deformation capacity in the presence of internal pressure referring to geohazard actions, as well as their capacity under external pressure for offshore applications in moderate deep water. Numerical models that simulate the manufacturing process (decoiling and spiral cold bending) are employed. Subsequently, the residual stresses due to cold bending are used to examine the capacity of pipe under external pressure and internally-pressurized bending. A parametric analysis is conducted to examine the effect of spiral cold forming process on the structural behavior of spiral welded pipes and the effect of internal pressure on bending capacity. The results from the present study support the argument that spiral-welded pipes can be used in demanding onshore and offshore pipeline applications.

The Influence of Diffusible Hydrogen in Weld Metal and Moisture Content Levels in Flux Related With Weld Metal Mechanical Properties in Submerged Arc Welding Process for Line Pipe Manufacturing

2015 ◽  
Author(s):  
Gautam Chauhan ◽  
Piyush Thakor ◽  
Satyanarayana Samavedam ◽  
Ramakrishnan Mannarsamy ◽  
Ashif Sheikh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Weld Metal ◽  
Hydrogen Content ◽  
Welding Process ◽  
Diffusible Hydrogen ◽  
Line Pipe ◽  
Arc Welding Process ◽  
Submerged Arc ◽  
Pipe Manufacturing

The mechanical properties of welding material is correlative with the diffusible hydrogen content in weld metal and level of moisture content in flux. Minitab16program to predict mechanical properties correlated to diffusible hydrogen content in weld metal and level of moisture content in flux, such as yield strength, tensile strength, elongation and average Charpy impact toughness of welding material is established by using submerged arc welding process in line pipe manufacturing. The present paper aims to experiment and investigate the line pipe SAW Flux used for offshore/onshore applications. Flux moisture content has been studied under Karl Fischer Coulometer method. Subsequently, flux was then used to make weld to analysis for ‘diffusible hydrogen content in weld metal’ through mercury displacement method. This detailed study envisages and explains the correlations between the mechanical properties and micro structures of weldments. Evaluating the variance of moisture level in flux and diffusible hydrogen content in weld metal proves the advantage of restricting the moisture content along with good practices to accomplish better weld quality.

scholarly journals Creation of start-of-the-art steels and technology of large diameter pipes production for oil and gas pipelines

2019 ◽  
Vol 75 (4) ◽  
pp. 497-506
Author(s):  
Yu. D. Morozov ◽  
M. Yu. Matrosov ◽  
B. F. Zin’ko
Keyword(s):  
Oil And Gas ◽  
Large Diameter ◽  
Operating Pressure ◽  
Gas Pipelines ◽  
Oil Pipelines ◽  
Large Diameter Pipes ◽  
High Level ◽  
Pipe Manufacturing ◽  
External Coating ◽  
Steel Works

The pipelines are one of most important section of the fuel and energy complex of Russia. About 75% of them are presented by gas pipelines of large diameter (1020–1420 mm) for the operating pressure up to 7.4 MPa. CNIIchermet after I.P. Bardin put a big contribution into creation of pipe steels and mastering of technologies for their production at steel-works of Russia. The Institute in cooperation with leading steels-works developed an array of pipe steel, which are successfully used at construction of modern gas and oil pipelines. Tendencies of requirements increasing to characteristics of steels for large diameter pipes for pipelines considered, creation stages of grade range of steels and technology of rolled products production analyzed. Main technological requirements for achieving mechanical properties high level determined. It was shown, that K60–K65 strength class steels meet requirements to northern pipelines for a pressure up to 11.8 MPa, to thick walled underwater pipelines for a pressure of 25.0 MPa and to pipes for seismic arears. Steel-works and pipe-manufacturing plant of Russia provide the production of longitudinal-welded pipes with wall thickness up to 40–60 mm with anticorrosion external coating and smooth internal coating.

Study on the Weldability of X100 Pipeline Steel on Scene

2013 ◽  
Vol 753-755 ◽  
pp. 343-352
Author(s):  
Pin Yi Wang ◽  
Zong Yuan Mou
Keyword(s):  
Oil And Gas ◽  
Pipeline Steel ◽  
Large Diameter ◽  
Welding Process ◽  
Field Application ◽  
Organization Performance ◽  
Long Distance ◽  
Line Pipe ◽  
Pipe Welding ◽  
X100 Pipeline Steel

With the long-distance oil and gas pipelines are to development of the direction of large-diameter, high-pressure, high grade pipeline steel applications gradually become the trend of the development of the oil and gas pipeline construction. The welding process of the X100 line pipe which is about to industrial application is not yet to be determined. It is not clear that the affect to the weldability from the metallurgical composition, organization, performance, and other factors which would affect the site construction welding process and welding measures. In addition, it is not yet the discussion and analysis of the key technologies X100 line pipe-site welding process and defect types. In this paper, the X100 pipeline on-site application of welding technology research commenced work and studied the weldability and welding process of X100 which solve the field application of X100 pipeline steel pipe welding issues.

The Influence of the UOE Forming Process on Material Properties and Collapse of Deepwater Linepipe

2009 ◽  
Author(s):  
Chris Timms ◽  
Luciano Mantovano ◽  
Hugo A. Ernst ◽  
Rita Toscano ◽  
Duane DeGeer ◽  
...  
Keyword(s):  
Finite Element ◽  
Material Properties ◽  
Manufacturing Process ◽  
Thermal Ageing ◽  
Full Scale ◽  
Sensitivity Analyses ◽  
Thickness Variation ◽  
Forming Process ◽  
Cold Forming ◽  
Pipe Manufacturing

It has been demonstrated in previous work that, for deepwater applications, the cold forming process involved in UOE pipe manufacturing significantly reduces pipe collapse strength. To improve the understanding of these effects, Tenaris has embarked on a program to model the stages of the UOE manufacturing process using finite element methods. Previous phases of this work formulated the basis for model development and described the 2D approach taken to model the various stages of manufacture. More recent developments included some modeling enhancements, sensitivity analyses, and comparison of predictions to the results of full-scale collapse testing performed at C-FER. This work has shown correlations between manufacturing parameters and collapse pressure predictions. The results of the latest phase of the research program are presented in this paper. This work consists of full-scale collapse testing and extensive coupon testing on samples collected from various stages of the UOE pipe manufacturing process including plate, UO, UOE, and thermally-aged UOE. Four UOE pipe samples manufactured with varying forming parameters were provided by Tenaris for this test program along with associated plate and UO samples. Full-scale collapse and buckle propagation tests were conducted on a sample from each of the four UOE pipes including one that was thermally aged. Additional coupon-scale work included measurement of the through-thickness variation of material properties and a thermal ageing study aimed at better understanding UOE pipe strength recovery. The results of these tests will provide the basis for further refinement of the finite element model as the program proceeds into the next phase.

Methods for Collapse Pressure Prediction of UOE Linepipe

2006 ◽  
Author(s):  
Andreas Liessem ◽  
Ulrich Marewski ◽  
Johannes Groß-Weege ◽  
Gerhard Knauf
Keyword(s):  
Boundary Conditions ◽  
Large Diameter ◽  
External Pressure ◽  
Test Method ◽  
Future Research ◽  
Line Pipe ◽  
Cold Forming ◽  
Research Issues ◽  
Collapse Pressure ◽  
Strain Behavior

Line pipe intended for deep water applications has to be designed predominantly with regard to external pressure in order to avoid plastic collapse. As a consequence of cold forming during UOE pipe manufacture and the subsequent application of anticorrosion coating, the characteristic stress strain behavior has to be taken into account for a reliable prediction of the collapse pressure. Verification of collapse resistance of large diameter pipes against external pressure requires adequate and reliable component testing using a sufficient number of pipe samples. These samples have to be subjected to test conditions, which closely simulate the situation in service. As the test results may depend significantly on its boundary conditions, the results needs to be thoroughly analysed and compared with existing prediction methods. It is for these reasons that such full-scale testing is time-consuming and costly. The work presented in this paper aims at clarifying and quantifying the effect of existing test boundary conditions on the results of collapse tests (collapse pressures). Correlations will be established between material properties found in laboratory tests and associated component behavior. In this context it had been necessary to develop an accurate and reproducible compression test method. The actual collapse pressures and those predicted using current available equations are compared and verified by Finite Element calculations. The paper concludes with a discussion of the major findings and with a brief outlook to future research issues.

Sign in / Sign up

Export Citation Format

Share Document