Additive Manufacturing of Functionally Graded Material Objects: A Review

2018 ◽  
Vol 18 (4) ◽  
Author(s):  
Binbin Zhang ◽  
Prakhar Jaiswal ◽  
Rahul Rai ◽  
Saigopal Nelaturi
Keyword(s):  
Additive Manufacturing ◽  
Functionally Graded ◽  
Graded Materials ◽  
Research Attention ◽  
Complex Shapes ◽  
Spatial Composition ◽  
Graded Material ◽  
Planning Processes ◽  
Key Aspects ◽  
Modeling Representation

Functionally graded materials (FGM) have recently attracted a lot of research attention in the wake of the recent prominence of additive manufacturing (AM) technologies. The continuously varying spatial composition profile of two or more materials affords FGM to possess properties of multiple different materials simultaneously. Emerging AM technologies enable manufacturing complex shapes with customized multifunctional material properties in an additive fashion. In this paper, we focus on providing an overview of research at the intersection of AM techniques and FGM objects. We specifically discuss FGM modeling representation schemes and outline a classification system to classify existing FGM representation methods. We also highlight the key aspects such as the part orientation, slicing, and path planning processes that are essential for fabricating FGM object through the use of multimaterial AM techniques.

Additive Manufacturing of Functionally Graded Objects: A Review

2016 ◽  
Author(s):  
Binbin Zhang ◽  
Prakhar Jaiswal ◽  
Rahul Rai ◽  
Saigopal Nelaturi
Keyword(s):  
Additive Manufacturing ◽  
Functionally Graded ◽  
Graded Materials ◽  
Research Attention ◽  
Complex Shapes ◽  
Spatial Composition ◽  
Planning Processes ◽  
Key Aspects ◽  
Modeling Representation ◽  
Part Orientation

Functionally graded materials (FGM) have recently attracted a lot of research attention in the wake of the recent prominence of additive manufacturing (AM) technology. The continuously varying spatial composition profile of two or more materials affords FGM object to simultaneously possess ideal properties of multiple different materials. Additionally, emerging technologies in AM domain enables one to make complex shapes with customized multifunctional material properties in an additive fashion, where laying down successive layers of material creates an object. In this paper, we focus on providing an overview of research at the intersection of AM techniques and FGM objects. We specifically discuss the FGM modeling representation schemes and outline a classification system to classify existing FGM representation methods. We also highlight the key aspects such as the part orientation, slicing, and path planning processes that are essential for fabricating a quality FGM object through the use of multi-material AM techniques.

Additive manufacturing of Inconel625-HSLA Steel functionally graded material by wire arc additive manufacturing

2021 ◽  
Vol 118 (5) ◽  
pp. 502
Author(s):  
Jiarong Zhang ◽  
Xinjie Di ◽  
Chengning Li ◽  
Xipeng Zhao ◽  
Lingzhi Ba ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Chemical Composition ◽  
Primary Dendrite ◽  
Hsla Steel ◽  
High Strength ◽  
Phase Evolution ◽  
Functionally Graded ◽  
Graded Materials ◽  
Graded Material ◽  
Wire Arc Additive Manufacturing

Functional graded materials (FGMs) have been widely applied in many engineering fields, and are very potential to be the substitutions of dissimilar metal welding joints due to their overall performance. In this work, the Inconel625-high-strength low-alloy (HSLA) Steel FGM was fabricated by wire arc additive manufacturing (WAAM). The chemical composition distribution, microstructure, phase evolution and mechanical properties of the FGM were examined. With the increasing of HSLA Steel, the chemical composition appeared graded distribution, and the primary dendrite spacing was largest in graded region with 20%HSLA Steel and then gradually decreased. And the main microstructure of the FGM transformed from columnar dendrites to equiaxed dendrites. Laves phase precipitated along dendrites boundary when the content of HSLA Steel was lower than 70% and Nb-rich carbides precipitated when the content of HSLA Steel exceeded to 70%. Microhardness and tensile strength gradually decreased with ascending content of HSLA Steel, and had a drastic improvement (159HV to 228HV and 355Mpa to 733Mpa) when proportion of HSLA Steel increased from 70% to 80%.

Functionally Graded Material (FGM) Parts: From Design to the Manufacturing Simulation

2012 ◽  
Author(s):  
Pierre Muller ◽  
Pascal Mognol ◽  
Jean-Yves Hascoet
Keyword(s):  
Additive Manufacturing ◽  
Gas Flow ◽  
Biochemical Properties ◽  
Functionally Graded ◽  
Graded Materials ◽  
Composition And Structure ◽  
Recent Developments ◽  
Graded Material ◽  
Metallic Parts ◽  
Complex Parts

Recent developments in additive manufacturing processes add opportunities to manufacture metallic parts. One of major recent evolutions of additive manufacturing is the ability to produce parts with functionally graded materials (FGM). These materials can be characterized by the variation in composition and structure gradually over the volume. The use of these materials is particularly attractive in fields such as aeronautical or biomedical where the multi-material parts allow modifying locally mechanical, chemical, physical or biochemical properties. Today, main of parts with FGM which are manufactured with these processes are not functional, with simple morphology, small dimensions and discrete multi-material repartition. To move from these samples to functional parts it is necessary to have a global control of the process used. It includes the control of all parameters — laser power, powder and gas flow rates, axis motions — and a manufacturing with an optimal strategy. A methodology to manufacture multi-material complex parts is proposed so as to have this global approach.

scholarly journals Ceramic-Based 4D Components: Additive Manufacturing (AM) of Ceramic-Based Functionally Graded Materials (FGM) by Thermoplastic 3D Printing (T3DP)

Materials ◽  
2017 ◽  
Vol 10 (12) ◽  
pp. 1368 ◽  
Author(s):  
Uwe Scheithauer ◽  
Steven Weingarten ◽  
Robert Johne ◽  
Eric Schwarzer ◽  
Johannes Abel ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Functionally Graded Materials ◽  
Functionally Graded ◽  
Graded Materials

The Elastic-Viscoelastic Correspondence Principle for Functionally Graded Materials, Revisited

2003 ◽  
Vol 70 (3) ◽  
pp. 359-363 ◽  
Author(s):  
S. Mukherjee ◽  
Glaucio H. Paulino
Keyword(s):  
Functionally Graded Materials ◽  
Functionally Graded Material ◽  
Correspondence Principle ◽  
Functionally Graded ◽  
Graded Materials ◽  
One Dimensional ◽  
Space And Time ◽  
Graded Material ◽  
Nonhomogeneous Materials ◽  
Exponentially Graded

Paulino and Jin [Paulino, G. H., and Jin, Z.-H., 2001, “Correspondence Principle in Viscoelastic Functionally Graded Materials,” ASME J. Appl. Mech., 68, pp. 129–132], have recently shown that the viscoelastic correspondence principle remains valid for a linearly isotropic viscoelastic functionally graded material with separable relaxation (or creep) functions in space and time. This paper revisits this issue by addressing some subtle points regarding this result and examines the reasons behind the success or failure of the correspondence principle for viscoelastic functionally graded materials. For the inseparable class of nonhomogeneous materials, the correspondence principle fails because of an inconsistency between the replacements of the moduli and of their derivatives. A simple but informative one-dimensional example, involving an exponentially graded material, is used to further clarify these reasons.

Incremental Melting and Solidification Process/Mechanical Characterization of Functionally Graded Al-Si Alloys

2008 ◽  
Vol 587-588 ◽  
pp. 400-404
Author(s):  
P. Pinto ◽  
L. Mazare ◽  
Delfim Soares ◽  
F.S. Silva
Keyword(s):  
Mechanical Properties ◽  
Functionally Graded Materials ◽  
Phase Distribution ◽  
Solidification Process ◽  
Functionally Graded ◽  
Graded Materials ◽  
Graded Material ◽  
Gradual Variation ◽  
Melting And Solidification

The Incremental Melting and Solidification Process (IMSP) is a relatively new field for material processing for the production of functionally graded materials. In this process a controlled liquid bath is maintained at the top of the component where new materials are added changing the components composition. Thus, a functionally graded material is obtained with a varying composition along one direction of the component. This paper deals with the influence of one of the process parameters, namely displacement rates between heating coil and mould, in order to evaluate its influence on both metallurgical and mechanical properties of different Al-Si alloys. Hardness and phase distribution, along the main castings axis, were measured. To better assess and characterize the process, two different Al-Si alloys with and without variation of chemical composition along the specimen were analysed. Results demonstrate that a gradual variation of metallurgical and mechanical properties along the component is obtained. It is also shown that Al-Si functionally graded materials can be produced by the incremental melting and solidification process. Results show that the displacement rate is very important on metallurgical and mechanical properties of the obtained alloy.

Approximate Functionally Graded Materials for Multi-Material Additive Manufacturing

2018 ◽  
Author(s):  
Yuen-Shan Leung ◽  
Huachao Mao ◽  
Yong Chen
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Functionally Graded Materials ◽  
Functionally Graded ◽  
Gradual Transition ◽  
Material Distribution ◽  
Graded Materials ◽  
Base Materials ◽  
Multiple Materials ◽  
Am Processes

Functionally graded materials (FGM) possess superior properties of multiple materials due to the continuous transitions of these materials. Recent progresses in multi-material additive manufacturing (AM) processes enable the creation of arbitrary material composition, which significantly enlarges the manufacturing capability of FGMs. At the same time, the fabrication capability also introduces new challenges for the design of FGMs. A critical issue is to create the continuous material distribution under the fabrication constraints of multi-material AM processes. Using voxels to approximate gradient material distribution could be one plausible way for additive manufacturing. However, current FGM design methods are non-additive-manufacturing-oriented and unpredictable. For instance, some designs require a vast number of materials to achieve continuous transitions; however, the material choices that are available in a multi-material AM machine are rather limited. Other designs control the volume fraction of two materials to achieve gradual transition; however, such transition cannot be functionally guaranteed. To address these issues, we present a design and fabrication framework for FGMs that can efficiently and effectively generate printable and predictable FGM structures. We adopt a data-driven approach to approximate the behavior of FGM using two base materials. A digital material library is constructed with different combinations of the base materials, and their mechanical properties are extracted by Finite Element Analysis (FEA). The mechanical properties are then used for the conversion process between the FGM and the dual material structure such that similar behavior is guaranteed. An error diffusion algorithm is further developed to minimize the approximation error. Simulation results on four test cases show that our approach is robust and accurate, and the framework can successfully design and fabricate such FGM structures.

Ontologies As a Tool for Design and Material Engineers

2020 ◽  
Author(s):  
Riccardo Pigazzi ◽  
Chiara Confalonieri ◽  
Marco Rossoni ◽  
Elisabetta Gariboldi ◽  
Giorgio Colombo
Keyword(s):  
Object Representation ◽  
Functionally Graded ◽  
Product Modeling ◽  
Graded Materials ◽  
3D Space ◽  
Heterogeneous Objects ◽  
Spatial Composition ◽  
Geometrical Information ◽  
Core Idea ◽  
Material Space

Abstract Functionally Graded Materials (FGMs), initially conceptualized in the ’80, have recently attracted a great research interest thanks to the advent of additive manufacturing (AM) technologies. AM permits to gradationally varying the spatial composition or porosity inside an object resulting in a corresponding spatial change in material properties. The data about this new class of materials are radically different from the traditional engineering materials and require information about the object geometry. Moreover, traditional methods for product design are not sufficient to represent heterogeneous objects. The full exploitation of these technologies requires the synergy of material science, product modeling and manufacturing domain. Ontologies can play a crucial role for the integration, making the information accessible and understandable to both experts from different domains and machines. In this paper, a prototypical ontology for the characterization of FGM objects is proposed. Firstly, an already existing FGM ontology is analyzed, highlighting shortcomings and possible improvements. Then, the new ontology is proposed, focusing on the classes and relationships for accommodating material knowledge and geometrical information. The core idea, retrieved from the literature on heterogeneous object representation and transposed in an ontological fashion, is based on the mapping between the geometrical 3D space and the n-dimensional material space. After presenting the new ontology, a benchmark case study is described to test the effectiveness of this approach along with some competency questions an engineer might be interested in. The proposed ontology represents a first, crucial building block for a more complex system aiming to support the communication and knowledge sharing among different actors in engineering.

Sign in / Sign up

Export Citation Format

Share Document