Effect of Thermal Properties of a Coated Elastohydrodynamic Lubrication Line Contact Under Various Slide-to-Roll Ratios

2017 ◽  
Vol 139 (7) ◽  
Author(s):  
Huaiju Liu ◽  
Caichao Zhu ◽  
Zonglin Gu ◽  
Zhanjiang Wang ◽  
Jinyuan Tang
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Elastohydrodynamic Lubrication ◽  
Temperature Fields ◽  
Line Contact ◽  
Oil Film ◽  
Line Contacts ◽  
Energy Equations ◽  
Thermal Conductivities

A numerical thermal elastohydrodynamic lubrication (EHL) model is developed for coated line contacts by considering both the mechanical properties and the thermal properties of the coating and the substrate. The temperature fields within the oil film and within the solids are solved by deriving the energy equations for the solids and the oil film. Heat continuity conditions are satisfied at the interfaces between the solids and the oil film, and the coating/substrate interfaces. Effects of the slide-to-roll ratio (SR), the thermal conductivities of the coating bodies, and the oil film on temperature fields are studied.

Simulation of Plasto-Elastohydrodynamic Lubrication in Line Contacts of Infinite and Finite Length

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Tao He ◽  
Jiaxu Wang ◽  
Zhanjiang Wang ◽  
Dong Zhu
Keyword(s):  
Surface Roughness ◽  
Finite Length ◽  
3D Model ◽  
Three Dimensional ◽  
Elastohydrodynamic Lubrication ◽  
Axial Direction ◽  
Contact Length ◽  
Line Contact ◽  
Line Contacts ◽  
3D Surface Topography

Line contact is common in many machine components, such as various gears, roller and needle bearings, and cams and followers. Traditionally, line contact is modeled as a two-dimensional (2D) problem when the surfaces are assumed to be smooth or treated stochastically. In reality, however, surface roughness is usually three-dimensional (3D) in nature, so that a 3D model is needed when analyzing contact and lubrication deterministically. Moreover, contact length is often finite, and realistic geometry may possibly include a crowning in the axial direction and round corners or chamfers at two ends. In the present study, plasto-elastohydrodynamic lubrication (PEHL) simulations for line contacts of both infinite and finite length have been conducted, taking into account the effects of surface roughness and possible plastic deformation, with a 3D model that is needed when taking into account the realistic contact geometry and the 3D surface topography. With this newly developed PEHL model, numerical cases are analyzed in order to reveal the PEHL characteristics in different types of line contact.

Size effect on thermal elastohydrodynamic lubrication of industrial chain bush-pin hinge pair

2019 ◽  
Vol 71 (9) ◽  
pp. 1080-1085 ◽  
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Yi Liu ◽  
Longjie Dai ◽  
Zhaohua Shang
Keyword(s):  
Friction Coefficient ◽  
Film Thickness ◽  
Temperature Rise ◽  
Elastohydrodynamic Lubrication ◽  
Curvature Radius ◽  
Line Contact ◽  
Content Type ◽  
Oil Film ◽  
Industrial Chain ◽  
Infinite Line

Purpose The purpose of this paper is to use elastohydrodynamic lubrication (EHL) theory to study the variation of the equivalent curvature radius “R” on the change of oil film thickness, pressure, temperature rise and friction coefficient in the contact zone between bush-pin in industrial chain drive. Design/methodology/approach In this paper, the contact between bush and pin is simplified as infinitely long line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. The two constitutive equations, namely, Newton fluid and Ree–Eyring fluid are used in the calculations. Findings It is found that with the increase of equivalent curvature radius, the thickness of oil film decreases and the temperature rise increases. Under the same condition, the friction coefficient of Newton fluid is higher than that of Ree–Eyring fluid. When the load increases, the oil film thickness decreases, the temperature rise increases and the friction coefficient decreases; and the film thickness increases with the increase of the entraining speed under the condition “R < 1,000 mm”. Research limitations/implications The infinite line contact assumption is only an approximation. For example, the distances between the two inner plates are 5.72 mm, by considering the two parts assembled into the inner plates, the total length of the bush is less than 6 mm. The diameter of the pin and the bore diameter of the bush are 3.28 and 3.33 mm. However, the infinite line contact is also helpful in understanding the general variation of oil film characteristics and provides a reference for the future study of finite line contact of chain problems. Originality/value The change of the equivalent radius R on the variation of the oil film in the contact of the bush and the pin in industrial chain drive was investigated. The size effect influences the lubrication characteristic greatly in the bush-pin pair.

Influence of lubrication starvation and surface waviness on the oil film stiffness of elastohydrodynamic lubrication line contact

2016 ◽  
Vol 24 (5) ◽  
pp. 924-936 ◽  
Author(s):  
Yuanyuan Zhang ◽  
Huaiju Liu ◽  
Caichao Zhu ◽  
Chaosheng Song ◽  
Zufeng Li
Keyword(s):  
Film Thickness ◽  
Contact Stiffness ◽  
Elastohydrodynamic Lubrication ◽  
Force Balance ◽  
Line Contact ◽  
Surface Waviness ◽  
Regular Surface ◽  
Normal Contact ◽  
Oil Film ◽  
Film Stiffness

Stiffness properties of interfacial engineering surfaces are of great importance to the dynamic performance of relevant mechanical systems. Normal contact stiffness and oil film stiffness of line contact problems are studied in this work analytically and numerically. The Hertzian contact theory and the Yang–Sun method are applied to predict the contact stiffness, while the empirical elastohydrodynamic lubrication (EHL) film thickness method and the complete numerical EHL model are used to predict the oil film stiffness. The numerical model mainly consists of the Reynolds equation; the film thickness equation, in which the regular surface roughness is taken into consideration; the force balance equation; and the viscosity-pressure equation. The effects of the normal load, rolling speed, regular surface waviness, and starved lubrication level on the oil film stiffness are investigated.

Effects of Bulk Thermal Properties on Polymer Transfer

1983 ◽  
Vol 105 (2) ◽  
pp. 259-269
Author(s):  
A. F. El Sanabary ◽  
D. Play ◽  
M. Godet
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Viscoelastic Properties ◽  
Thermal Conductivities ◽  
Soft Polymers

Thickness of traces formed by rubbing soft polymers of predetermined viscoelastic properties against counterfaces of different thermal conductivities were measured. Results show that thickness is governed essentially by the variation of the mechanical properties of the polymer with temperature.

Effects of a Single Bump or Dent in Time Dependent Thermal Line EHD Lubrication

1994 ◽  
Vol 116 (1) ◽  
pp. 9-20 ◽  
Author(s):  
Farshid Sadeghi ◽  
Kyung-Hoon Kim
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Transient Behavior ◽  
Time Dependent ◽  
Line Contact ◽  
Temperature Distributions ◽  
Ehd Lubrication ◽  
Pure Rolling ◽  
Energy Equations ◽  
Thermal Line

A time-dependent thermal compressible elastohydrodynamic lubrication of line contact model has been developed to investigate the effects of a single bump or dent in heavily loaded rolling/sliding contacts. The results illustrate the transient behavior of the film thickness, pressure and temperature distributions as a bump or a dent travels through the contact. The multigrid multilevel technique was used to simultaneously solve the discretized time dependent Reynolds, elasticity and energy equations. The effects of various loads and speeds have been investigated. Results are presented for the nondimensional loads of W = 1.3 × 10−4, 2.3 × 10−4 and nondimensional speeds ranging from U = 1 × 10−11 to U = 10−10 under pure rolling and rolling/sliding conditions.

A Theory of Thermo-Elastohydrodynamic Lubrication of Liquid-Solid Lubricated Cylinders

1990 ◽  
Vol 112 (2) ◽  
pp. 259-265 ◽  
Author(s):  
M. M. Khonsari ◽  
S. H. Wang ◽  
Y. L. Qi
Keyword(s):  
Mechanical Properties ◽  
Solid Lubricant ◽  
Elastohydrodynamic Lubrication ◽  
Solid Lubricants ◽  
Theoretical Development ◽  
Rheological Characteristics ◽  
Combined Effects ◽  
Line Contact ◽  
The Coefficient Of Friction ◽  
Bounding Surfaces

The purpose of this research is to extend the theory of the concentrated thermo-elastohydrodynamic line contact to include the influence of the existence of solid lubricant dispersed in liquid-base lubricant. The combined effects of the rheological characteristics of the oil and the mechanical properties of the particles and those of the bounding surfaces are taken into consideration in theoretical development. Results are presented for the pressure distribution, the oil film thickness, the temperature rise, and the coefficient of friction for two commonly used solid lubricants namely MOS2 and graphite.

Elastohydrodynamic Lubrication Between Rolling and Sliding Ceramic Cylinders: An Experimental Investigation1

2000 ◽  
Vol 122 (4) ◽  
pp. 721-724 ◽  
Author(s):  
T. Sperrfechter ◽  
R. Haller
Keyword(s):  
Thermal Conductivity ◽  
Film Thickness ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Elastohydrodynamic Lubrication ◽  
Ceramic Materials ◽  
Oil Film ◽  
Thin Film Sensors ◽  
Line Contacts ◽  
Clear Increase

The present work focuses on the investigation of the influence of bulk ceramic materials on the behavior of elastohydrodynamically (EHD) lubricated line contacts. The materials alumina Al2O3, zirconium oxide ZrO2 and aluminum nitride (AIN) are used. Comparative measurements were taken with steel disks made of 42CrMo4. Of primary importance are the material parameters Young’s modulus and thermal conductivity. The experimental variables pressure, temperature and oil film thickness in the EHD contact of a two disk test rig were measured with the aid of evaporated thin film sensors. As the results show, an increase in the Young’s modulus causes a clear increase of the pressure level. The oil film thickness distributions show a decline of the flattening width and of the constriction occurring at the contact outlet. The influence of the material with respect to its thermal conductivity dominates, above all, in the region of the load transmitting contact zone. The transition from a good to a bad conductor of heat causes a rise in temperature, more prominent for materials with lower thermal conductivities. This leads to viscosity decrease causing clearly reduced oil film thicknesses in the contact. [S0742-4787(00)01404-1]

The Significance of Oil Thermal Properties on the Performance of a Tilting-Pad Thrust Bearing

2001 ◽  
Vol 124 (2) ◽  
pp. 377-385 ◽  
Author(s):  
Sergei B. Glavatskih ◽  
Michel Fillon ◽  
Roland Larsson
Keyword(s):  
Thermal Properties ◽  
Film Thickness ◽  
Thrust Bearing ◽  
Friction Torque ◽  
Temperature Fields ◽  
Outer Diameter ◽  
Oil Film ◽  
Tilting Pad ◽  
Viscosity Grade ◽  
Mineral Base

This paper is a report into an experimental and theoretical investigation of the effect of oil thermal properties on the performance of a tilting-pad thrust bearing. Three oils, namely poly-α-olefin, ester and mineral base, were chosen for this study. These oils all have same viscosity grade (ISO VG46) but differ in their rates of viscosity variation with temperature and in their heat capacity and thermal conductivity values. Mineral base oil of a higher viscosity grade (ISO VG68) was also analyzed for comparison. Experimental data were obtained from an equalizing tilting-pad thrust bearing with an outer diameter of 228.6 mm operating in a flooded lubrication mode. Simultaneous measurements of pad and collar temperatures, friction torque, pressures and oil film thickness were taken. In the tests, oil supply temperature and flow rate were held constant for all load-speed combinations. The theoretical analysis of oil performance was based on a three-dimensional TEHD model. In the analysis, thermal effects were locally taken into account and heat transfer into the pads was considered. The displacements of the active surface of the pads, due to pressure and temperature fields, were determined. The effect of initial pad crowning on the oil film thickness is discussed. Experimental and theoretical results are compared and analyzed in terms of the inlet and outlet oil film thickness, bearing operating temperature and power loss.

Influence of Different Viscosity Lubricant to Finite Line Contacts on Elastohydrodynamic Lubrication (EHL) under Oscillating

2012 ◽  
Vol 538-541 ◽  
pp. 1939-1944
Author(s):  
Yan Fei Wang ◽  
Tong Shu Hua ◽  
Hao Yang Sun
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Oil Film ◽  
Entrainment Velocity ◽  
Finite Line Contact ◽  
Line Contacts ◽  
Finite Line ◽  
Contact Roller ◽  
Two Parameters ◽  
Experimental Rig

To make further researches into the elastohydrodynamic lubrication properties of a finite line contact roller, oscillating experiments were carried out on made overload experimental rig for oil film measurement using optical interference technique. Film thickness and shape were measured in two kinds of viscosity polyisobutylene. This study indicates that both lubricant viscosity and roller entrainment velocity play an important role on EHL of finite line contacts. On motion, the more increase in viscosity or speed, the thicker the oil film thickness, simultaneity edge effect is distinctly intensified and film thickness increases less on roller end, difference of the film thickness is increased between roller end and the central. Above two parameters are significant for logarithmic profile roller in crowning design.

Sign in / Sign up

Export Citation Format

Share Document