Viscous Dissipation Effect on Streamwise Entropy Generation of Nanofluid Flow in Microchannel Heat Sinks

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Tiew Wei Ting ◽  
Yew Mun Hung ◽  
Ningqun Guo
Keyword(s):  
Viscous Dissipation ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Second Law Of Thermodynamics ◽  
Reynolds Numbers ◽  
Heat Sinks ◽  
Fluid Friction ◽  
Closed Form Solutions ◽  
Dissipation Effect ◽  
Dissipation Term

The effects of viscous dissipation on the entropy generation of water–alumina nanofluid convection in circular microchannels subjected to exponential wall heat flux are investigated. Closed-form solutions of the temperature distributions in the streamwise direction are obtained for the models with and without viscous dissipation term in the energy equation. The two models are compared by analyzing their relative deviations in entropy generation for different Reynolds numbers and nanoparticle volume fractions. The incorporation of viscous dissipation prominently affects the temperature distribution and consequently the entropy generation. When the viscous dissipation effect is neglected, the total entropy generation and the fluid friction irreversibility are nearly twofold overrated while the heat transfer irreversibility is underestimated significantly. By considering the viscous dissipation effect, the exergetic effectiveness for forced convection of nanofluid in microchannels attenuates with the increasing nanoparticle volume fraction and nanoparticle diameter. The increase in the entropy generation of nanofluid is mainly attributed to the intensification of fluid friction irreversibility. From the aspect of the second-law of thermodynamics, the widespread conjecture that nanofluids possess advantage over pure fluid associated with higher overall effectiveness is invalidated.

Viscous Dissipation Effect on Entropy Generation of Nanofluid Flow in Microchannels

2013 ◽  
Author(s):  
Tiew Wei Ting ◽  
Yew Mun Hung ◽  
Ningqun Guo
Keyword(s):  
Forced Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Second Law Of Thermodynamics ◽  
Nanoparticle Volume Fraction ◽  
Fluid Friction ◽  
Closed Form Solutions ◽  
Dissipation Effect ◽  
Dissipation Term

An analytical study of the viscous dissipation effect on entropy generation of forced convection of water-alumina nanofluid in a circular microchannel subjected to exponential wall heat flux is reported. Closed form solutions of the temperature distributions in the streamwise direction for the models with and without viscous dissipation term in the energy equation are obtained. The two models are compared by analyzing their relative deviations in entropy generation for different Reynolds number and nanoparticle volume fraction. The incorporation of viscous dissipation prominently affects the temperature distribution and consequently the entropy generation. The increase in the entropy generation is mainly attributable to the increase in the fluid friction irreversibility. The addition of nanoparticle increases the effective thermal conductivity and viscosity of nanofluid which induces escalation in the heat transfer and fluid friction irreversibilities, respectively. By taking the viscous dissipation effect into account, the exergetic effectiveness for forced convection of nanofluid in microchannels attenuate with increasing nanoparticle volume fraction. From the aspect of the second law of thermodynamics, the widespread conjecture that nanofluids possess advantage over pure fluid associated with higher overall effectiveness is invalidated.

scholarly journals Entropy generation of a hybrid nanofluid on MHD mixed convection is a lid-driven cavity with partial heating having two rounded corners

2021 ◽  
Vol 321 ◽  
pp. 02004
Author(s):  
Zakaria Korei ◽  
Smail Benissaad
Keyword(s):  
Thermal Conductivity ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Object Oriented ◽  
Reynolds Numbers ◽  
Hybrid Nanofluid ◽  
Driven Cavity ◽  
Partial Heating

This research aims to investigate thermal and flow behaviors and entropy generation of magnetohydrodynamic Al2O3-Cu/water hybrid nanofluid in a lid-driven cavity having two rounded corners. A solver based on C ++ object-oriented language was developed where the finite volume was used. Parameter’s analysis is provided by varying Reynolds numbers (Re), Hartmann numbers (Ha), the volume fraction of hybrid nanofluid (ϕ), radii of the rounded corners. The findings show that reducing the radii of the rounded corners minimizes the irreversibility. Furthermore, the thermal conductivity and dynamic viscosity of hybrid nanofluid contribute to increasing the irreversibility. Finally, the entropy generation is decreased by increasing the Hartman number and increases by rising the Reynolds number.

scholarly journals Fluid Flow and Entropy Generation Analysis of Al2O3–Water Nanofluid in Microchannel Plate Fin Heat Sinks

Entropy ◽  
2019 ◽  
Vol 21 (8) ◽  
pp. 739 ◽  
Author(s):  
Hao Ma ◽  
Zhipeng Duan ◽  
Liangbin Su ◽  
Xiaoru Ning ◽  
Jiao Bai ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Pressure Drop ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Microchannel Plate ◽  
Heat Sinks ◽  
Entropy Generation Rate ◽  
Nanoparticle Volume Fraction ◽  
Channel Aspect Ratio

The flow in channels of microdevices is usually in the developing regime. Three-dimensional laminar flow characteristics of a nanofluid in microchannel plate fin heat sinks are investigated numerically in this paper. Deionized water and Al2O3–water nanofluid are employed as the cooling fluid in our work. The effects of the Reynolds number (100 < Re < 1000), channel aspect ratio (0 < ε < 1), and nanoparticle volume fraction (0.5% < Φ < 5%) on pressure drop and entropy generation in microchannel plate fin heat sinks are examined in detail. Herein, the general expression of the entropy generation rate considering entrance effects is developed. The results revealed that the frictional entropy generation and pressure drop increase as nanoparticle volume fraction and Reynolds number increase, while decrease as the channel aspect ratio increases. When the nanoparticle volume fraction increases from 0 to 3% at Re = 500, the pressure drop of microchannel plate fin heat sinks with ε = 0.5 increases by 9%. It is demonstrated that the effect of the entrance region is crucial for evaluating the performance of microchannel plate fin heat sinks. The study may shed some light on the design and optimization of microchannel heat sinks.

Analyses of Liquid Flow in Micro-Conduits

2004 ◽  
Author(s):  
Junemo Koo ◽  
Clement Kleinstreuer
Keyword(s):  
Reynolds Number ◽  
Aspect Ratio ◽  
Friction Factor ◽  
Viscous Dissipation ◽  
Wall Slip ◽  
Reynolds Numbers ◽  
Darcy Number ◽  
Low Reynolds Numbers ◽  
Dissipation Effect ◽  
Liquid Flows

Experimental observations of liquid microchannel flow are reviewed and results of computer experiments concerning channel entrance, wall slip, non-Newtonian fluid, surface roughness, viscous dissipation and flow instability effects on the friction factor are discussed Specifically, based on numerical friction factor analyses, the entrance effect should be taken into account for any microfluidic system. It is a function of channel length, aspect ratio and the Reynolds number. Non-Newtonian fluid flow effects are expected to be important for polymeric liquids and dense particle suspension flows. The wall-slip effect is negligible for liquid flows. For relatively low Reynolds numbers, i.e., Re > 1,200, onset to instabilities may have to be considered because of possible geometric non-uniformities, including a contraction and/or bend at the microchannel inlet as well as substantial surface roughness. Significant roughness effects, described with a new porous medium layer (PML) model, are a function of the Darcy number, the Reynolds number and cross-sectional configurations. This model was applied to micro-scale liquid flows in straight channels, tubes and rotating cylinders, and validated with experimental data sets. In contrast to published models, PML model simulations yield both an increase and decrease of the friction factor depending on the Darcy number. Viscous dissipation in microchannels is a strong function of the channel aspect ratio, Reynolds number, Eckert number, Prandtl number, and conduit hydraulic diameter. Specifically, viscous dissipation effects are quite important for fluids with low specific heat capacities and high viscosities, even for very low Reynolds numbers, i.e., ReD < 1. The viscous dissipation effect was found to decrease as the fluid temperature increases. As the aspect ratio deviates from unity, the viscous dissipation effect increases. It was found that ignoring the viscous dissipation effect could ultimately affect friction factor measurements for flows in micro-conduits. This could imply a significant amount of viscous heat generation and, for example, may diminish a projected micro-heat-exchanger performance.

Viscous dissipation effect on entropy generation in curved square microchannels

Energy ◽  
2011 ◽  
Vol 36 (8) ◽  
pp. 5416-5423 ◽  
Author(s):  
Jiangfeng Guo ◽  
Mingtian Xu ◽  
Jun Cai ◽  
Xiulan Huai
Keyword(s):  
Viscous Dissipation ◽  
Entropy Generation ◽  
Dissipation Effect

scholarly journals Transpiration and Viscous Dissipation Effects on Entropy Generation in Hybrid Nanofluid Flow over a Nonlinear Radially Stretching Disk

Entropy ◽  
2018 ◽  
Vol 20 (9) ◽  
pp. 668 ◽  
Author(s):  
Umer Farooq ◽  
Muhammad Afridi ◽  
Muhammad Qasim ◽  
D. Lu
Keyword(s):  
Boundary Layer ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Research Work ◽  
Dissipation Function ◽  
Hybrid Nanofluid ◽  
Layer Flow

The present research work explores the effects of suction/injection and viscous dissipation on entropy generation in the boundary layer flow of a hybrid nanofluid (Cu–Al2O3–H2O) over a nonlinear radially stretching porous disk. The energy dissipation function is added in the energy equation in order to incorporate the effects of viscous dissipation. The Tiwari and Das model is used in this work. The flow, heat transfer, and entropy generation analysis have been performed using a modified form of the Maxwell Garnett (MG) and Brinkman nanofluid model for effective thermal conductivity and dynamic viscosity, respectively. Suitable transformations are utilized to obtain a set of self-similar ordinary differential equations. Numerical solutions are obtained using shooting and bvp4c Matlab solver. The comparison of solutions shows excellent agreement. To examine the effects of principal flow parameters like suction/injection, the Eckert number, and solid volume fraction, different graphs are plotted and discussed. It is concluded that entropy generation inside the boundary layer of a hybrid nanofluid is high compared to a convectional nanofluid.

scholarly journals Entropy Generation Optimization in Squeezing Magnetohydrodynamics Flow of Casson Nanofluid with Viscous Dissipation and Joule Heating Effect

Entropy ◽  
2019 ◽  
Vol 21 (8) ◽  
pp. 747 ◽  
Author(s):  
Muhammad Zubair ◽  
Zahir Shah ◽  
Abdullah Dawar ◽  
Saeed Islam ◽  
Poom Kumam ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Skin Friction ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Joule Heating ◽  
Volume Fraction ◽  
Bejan Number ◽  
Parallel Plates ◽  
Casson Nanofluid ◽  
Porosity Parameter

In this research article, the investigation of the three-dimensional Casson nanofluid flow in two rotating parallel plates has been presented. The nanofluid has been considered in steady state. The rotating plates have been considered porous. The heat equation is considered to study the magnetic field, joule heating, and viscous dissipation impacts. The nonlinear ordinary system of equations has been solved analytically and numerically. For skin friction and Nusslt number, numerical results are tabulated. It is found that velocity declines for higher values of magnetic and porosity parameter while it is heightened through squeezing parameter. Temperature is an enhancing function for Eckert number and nanoparticles volume fraction. Entropy generation is augmented with radiation parameter, Prandtl, and Eckert numbers. The Casson, porosity, magnetic field, and rotation parameters were reduced while the squeezing and suction parameters increased the velocity profile along x-direction. The porosity parameter increased the Bejan number while the Eckert and Prandtl numbers decreased the Bejan number. Skin friction was enhanced with increasing the Casson, porosity, and magnetic parameters while it decreased with enhancing rotation and squeezing parameters. All these impacts have been shown via graphs. The influences by fluid flow parameters over skin friction and Nusselt number are accessible through tables.

Sign in / Sign up

Export Citation Format

Share Document