Variable Motion/Force Transmissibility of a Metamorphic Parallel Mechanism With Reconfigurable 3T and 3R Motion

2016 ◽  
Vol 8 (5) ◽  
Author(s):  
Dongming Gan ◽  
Jian S. Dai ◽  
Jorge Dias ◽  
Lakmal D. Seneviratne
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Geometric Constraints ◽  
Design Parameters ◽  
Force Transmission ◽  
Pure Rotation ◽  
Rotation Axes ◽  
Potential Applications ◽  
Force Transmissibility

This paper presents a metamorphic parallel mechanism (MPM) which can switch its motion between pure translation (3T) and pure rotation (3R). This feature stems from a reconfigurable Hooke (rT) joint of which one of the rotation axes can be altered freely. More than that, based on the reconfiguration of the rT joint, workspace of both 3T and 3R motion can be tunable, and the rotation center of the 3R motion can be controlled along a line perpendicular to the base plane. Kinematics analysis is presented based on the geometric constraints of the parallel mechanism covering both 3T and 3R motion. Following this, screw theory based motion/force transmission equations are obtained, and their characteristics are investigated and linked to the singularity analysis using Jacobian matrix. Motion/force transmission indices can be used to optimize basic design parameters of the MPM. This provides reference of this mechanism for potential applications requiring 3T and 3R motion.

Variable Motion/Force Transmissibility of a Metamorphic Parallel Mechanism With Reconfigurable 3T and 3R Motion

2015 ◽  
Author(s):  
Dongming Gan ◽  
Jian S. Dai ◽  
Jorge Dias ◽  
Lakmal D. Seneviratne
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Design Parameters ◽  
Force Transmission ◽  
Pure Rotation ◽  
Rotation Axes ◽  
Potential Applications ◽  
Force Transmissibility

This paper presents a metamorphic parallel mechanism which can switch its motion between pure translation (3T) and pure rotation (3R) motion. This feature stems from a reconfigurable Hooke (rT) joint of which one of the rotation axes can be altered freely. More than that, based on the reconfiguration of the rT joint, workspace of both 3T and 3R motion can be tunable and the rotation center of the 3R motion can be controlled along a line perpendicular to the base plane. Kinematics analysis is presented based on the geometric constraint of the parallel mechanism covering both 3T and 3R motion. Following these screw theory based motion/force transmission equations are obtained and their characteristics are investigated and linked to the singularity analysis using Jacobian matrix. Motion/force transmission indices can be used to optimize basic design parameters of the metamorphic parallel mechanism. This provides reference of this mechanism for potential applications requiring 3T and 3R motion.

Design of a new gravity balanced parallel mechanism with Schönflies motion

2016 ◽  
Vol 230 (17) ◽  
pp. 3111-3134 ◽  
Author(s):  
Long Kang ◽  
Se-Min Oh ◽  
Wheekuk Kim ◽  
Byung-Ju Yi
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Force Transmission ◽  
Kinematic Modeling ◽  
Potential Applications ◽  
Structure Description ◽  
Grassmann Line Geometry ◽  
Schönflies Motion ◽  
Forward Kinematic

In this paper, a new gravity-balanced 3T1R parallel mechanism is addressed. Firstly, structure description, inverse and forward kinematic modeling are performed in detail. Secondly, Jacobian derivation based on screw theory and singularity analysis using Grassmann Line Geometry is performed, and then optimal kinematic design with respect to workspace size, kinematic isotropy and maximum force transmission ratio are conducted. Thirdly, the gravity balancing design using both counterweights and springs is proposed and a prototype of this mechanism is also presented. Results of analysis show that the proposed mechanism has quite a few potential applications.

Kinematics of a Pure Translational UPS/3RPaPaR Parallel Mechanism

2007 ◽  
Author(s):  
Chung-Ching Lee ◽  
Po-Chih Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Translational Motion ◽  
Singularity Analysis ◽  
Inverse Kinematic ◽  
Geometric Constraints ◽  
Design Parameters ◽  
Numerical Illustration ◽  
The Matrix ◽  
Kinematic Analyses

From the viewpoint of kinematics, a type of 3 degrees of freedom (dofs) UPS/3RPaPaR overconstrained parallel mechanism (Pa means the hinged 4R parallelogram) with pure translational motion is presented for the development of automatic assembly devices or as a regional structure in the hybrid parallel platform. In the beginning, the formation & mobility are elucidated and the 4×4 transformation matrix & the D-H notation with specific geometric constraints verify the pure translational motion. The forward and inverse kinematic analyses are then established in the analytical closed-form through the matrix method. Besides, we take a numerical illustration for the confirmation of correctness of the derived equations. The determination of workspace is also attained by the intersection of volumes swept by each limb. In addition, the Jacobian matrix and its condition number indicated by Euclidean norm as a function of design parameters are further achieved. Finally, the singularity analysis of the configuration based on the direct and inverse kinematic J-matrix during the movement is identified in detail.

scholarly journals Optimum Seeking of Redundant Actuators for M-RCM 3-UPU Parallel Mechanism

2020 ◽  
Author(s):  
Chen Zhao ◽  
Jingke Song ◽  
Xuechan Chen ◽  
Ziming Chen ◽  
Huafeng Ding
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Universal Joint ◽  
Prismatic Joint ◽  
Transmission Index ◽  
Redundant Actuators ◽  
Force Transmissibility ◽  
Singular Configuration

Abstract This paper focuses on a 2R1T 3-UPU (U for universal joint and P for prismatic joint) parallel mechanism (PM) with two rotational and one translational (2R1T) degrees of freedom (DOFs) and the ability of multiple remote centers of motion (M-RCM). The singularity analysis based on the indexes of motion/force transmissibility and constraint shows that this PM has transmission singularity, constraint singularity, mixed singularity and limb singularity. To solve these singularproblems, the quantifiable redundancy transmission index (RTI) and the redundancy constraint index (RCI) are proposed for optimum seeking of redundant actuators for this PM. Then the appropriate redundant actuators are selected and the working scheme for redundant actuators near the corresponding singular configuration are given to help the PM go through the singularity.

Topology and Constraint Analysis of Phase Change in the Metamorphic Chain and Its Evolved Mechanism

2010 ◽  
Vol 132 (12) ◽  
Author(s):  
Ketao Zhang ◽  
Jian S. Dai ◽  
Yuefa Fang
Keyword(s):  
Phase Change ◽  
Parallel Mechanism ◽  
Screw Theory ◽  
Evolutionary Process ◽  
Geometric Constraints ◽  
Structure Evolution ◽  
Kinematic Pair ◽  
Motion Patterns ◽  
Metamorphic Mechanism ◽  
Topological State

This paper presents a metamorphic kinematic pair extracted from origami folds in the context of mechanisms, its evolved metamorphic chain, and the novel metamorphic parallel mechanism. This paper starts from the generic issues of topological representation for metamorphic mechanism, leading to unified elementary matrix operation for presentation of topological variation. Phase matrix and augmented adjacency matrix are developed to present the topological state and geometry of metamorphic mechanism in an evolutionary process. The metamorphic kinematic pair has the ability of changing mobility to generate different motion patterns based on mobility change correlated with the link annex induced topological phase change. This paper then investigates topological variation of the metamorphic chain and the topological subphases are enumerated in accordance with structure evolution. Using the metamorphic chain as chain-legs, a multiloop metamorphic mechanism with ability of performing phase change and orientation switch is constructed. The disposition of constraints and geometric constraints induced bifurcated motion are analyzed based on screw theory. The topological variation of the metamorphic parallel mechanism is addressed and the foldability is verified by physical device.

Optimal Design of a Metamorphic Parallel Mechanism With Reconfigurable 1T2R and 3R Motion Based on Unified Motion/Force Transmissibility

2016 ◽  
Author(s):  
Dongming Gan ◽  
Jian S. Dai ◽  
Jorge Dias ◽  
Lakmal D. Seneviratne
Keyword(s):  
Optimal Design ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Rotation Axis ◽  
Geometric Constraint ◽  
Transmission Performance ◽  
Trade Off ◽  
Pure Rotation ◽  
Force Transmissibility

This paper presents a metamorphic parallel mechanism which can switch its motion between one translation and two rotation (1T2R) motion and pure rotation (3R) motion. This feature stems from a reconfigurable revolute (rR) joint of which the rotation axis can be altered freely. Screw based geometric constraint is used to demonstrate the reconfiguration and mobility. Unified inverse kinematics, Jacobian matrix and motion/force transmissibility are provided using screws. Based on those, singularity loci are illustrated and optimal design of some key parameters are conducted considering both the 1T2R and 3R phases. Trade-off can be made between the maximum singularity-free workspace and transmission performance based on the optimal design results in this paper for specific applications requiring 1T2R and 3R motion.

Motion/Force Transmission Analysis of Parallel Mechanisms With Planar Closed-Loop Subchains

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Kristan Marlow ◽  
Mats Isaksson ◽  
Jian S. Dai ◽  
Saeid Nahavandi
Keyword(s):  
Performance Measures ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Closed Loop ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Force Transmission ◽  
Six Degrees Of Freedom ◽  
Lower Mobility ◽  
Transmission Ability

Singularities are one of the most important issues affecting the performance of parallel mechanisms. A parallel mechanism with less than six degrees of freedom (6DOF) is classed as having lower mobility. In addition to input–output singularities, such mechanisms potentially suffer from singularities among their constraints. Furthermore, the utilization of closed-loop subchains (CLSCs) may introduce additional singularities, which can strongly affect the motion/force transmission ability of the entire mechanism. In this paper, we propose a technique for the analysis of singularities occurring within planar CLSCs, along with a finite, dimensionless, frame invariant index, based on screw theory, for examining the closeness to these singularities. The integration of the proposed index with existing performance measures is discussed in detail and exemplified on a prototype industrial parallel mechanism.

Optimal Design of Spherical 5R Parallel Manipulators Considering the Motion/Force Transmissibility

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Chao Wu ◽  
Xin-Jun Liu ◽  
Liping Wang ◽  
Jinsong Wang
Keyword(s):  
Performance Evaluation ◽  
Optimal Design ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Dimensional Synthesis ◽  
Force Transmission ◽  
Minimally Invasive Surgical ◽  
Pointing Device ◽  
Force Transmissibility

The spherical 5R parallel manipulator is a typical parallel manipulator. It can be used as a pointing device or as a minimally invasive surgical robot. This study addresses the motion/force transmission analysis and optimization of the manipulator by taking into account the motion/force transmissibility. The kinematics of the manipulator is analyzed. Several transmission indices are defined by using screw theory for the performance evaluation and dimensional synthesis. The process of determining the optimal angular parameters based on performance charts is presented. The manipulator that has a large workspace and good motion/force transmissibility is identified.

scholarly journals Kinematic analysis of a novel 3-CRU translational parallel mechanism

2015 ◽  
Vol 6 (1) ◽  
pp. 57-64 ◽  
Author(s):  
B. Li ◽  
Y. M. Li ◽  
X. H. Zhao ◽  
W. M. Ge
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Structural Characteristics ◽  
Parallel Mechanisms ◽  
Reachable Workspace ◽  
Potential Applications ◽  
Moving Platform ◽  
And Performance

Abstract. In this paper, a modified 3-DOF (degrees of freedom) translational parallel mechanism (TPM) three-CRU (C, R, and U represent the cylindrical, revolute, and universal joints, respectively) structure is proposed. The architecture of the TPM is comprised of a moving platform attached to a base through three CRU jointed serial linkages. The prismatic motions of the cylindrical joints are considered to be actively actuated. Kinematics and performance of the TPM are studied systematically. Firstly, the structural characteristics of the mechanism are described, and then some comparisons are made with the existing 3-CRU parallel mechanisms. Although these two 3-CRU parallel mechanisms are both composed of the same CRU limbs, the types of freedoms are completely different due to the different arrangements of limbs. The DOFs of this TPM are analyzed by means of screw theory. Secondly, both the inverse and forward displacements are derived in closed form, and then these two problems are calculated directly in explicit form. Thereafter, the Jacobian matrix of the mechanism is derived, the performances of the mechanism are evaluated based on the conditioning index, and the performance of a 3-CRU TPM changing with the actuator layout angle is investigated. Thirdly, the workspace of the mechanism is obtained based on the forward position analysis, and the reachable workspace volume is derived when the actuator layout angle is changed. Finally, some conclusions are given and the potential applications of the mechanism are pointed out.

scholarly journals Screw Theory Based Singularity Analysis of Lower-Mobility Parallel Robots considering the Motion/Force Transmissibility and Constrainability

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Xiang Chen ◽  
Xin-Jun Liu ◽  
Fugui Xie
Keyword(s):  
Screw Theory ◽  
Mathematical Problem ◽  
Engineering Application ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
Parallel Mechanisms ◽  
Input And Output ◽  
Lower Mobility ◽  
Force Transmissibility ◽  
Output Constraint

Singularity is an inherent characteristic of parallel robots and is also a typical mathematical problem in engineering application. In general, to identify singularity configuration, the singular solution in mathematics should be derived. This work introduces an alternative approach to the singularity identification of lower-mobility parallel robots considering the motion/force transmissibility and constrainability. The theory of screws is used as the mathematic tool to define the transmission and constraint indices of parallel robots. The singularity is hereby classified into four types concerning both input and output members of a parallel robot, that is, input transmission singularity, output transmission singularity, input constraint singularity, and output constraint singularity. Furthermore, we take several typical parallel robots as examples to illustrate the process of singularity analysis. Particularly, the input and output constraint singularities which are firstly proposed in this work are depicted in detail. The results demonstrate that the method can not only identify all possible singular configurations, but also explain their physical meanings. Therefore, the proposed approach is proved to be comprehensible and effective in solving singularity problems in parallel mechanisms.

Sign in / Sign up

Export Citation Format

Share Document