Optimal Design of Spherical 5R Parallel Manipulators Considering the Motion/Force Transmissibility

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Chao Wu ◽  
Xin-Jun Liu ◽  
Liping Wang ◽  
Jinsong Wang
Keyword(s):  
Performance Evaluation ◽  
Optimal Design ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Dimensional Synthesis ◽  
Force Transmission ◽  
Minimally Invasive Surgical ◽  
Pointing Device ◽  
Force Transmissibility

The spherical 5R parallel manipulator is a typical parallel manipulator. It can be used as a pointing device or as a minimally invasive surgical robot. This study addresses the motion/force transmission analysis and optimization of the manipulator by taking into account the motion/force transmissibility. The kinematics of the manipulator is analyzed. Several transmission indices are defined by using screw theory for the performance evaluation and dimensional synthesis. The process of determining the optimal angular parameters based on performance charts is presented. The manipulator that has a large workspace and good motion/force transmissibility is identified.

Performance evaluation of a special 6-PUS type parallel manipulator

Robotica ◽  
2021 ◽  
pp. 1-15
Author(s):  
Xiaochu Liu ◽  
Yunfei Cai ◽  
Weitian Liu ◽  
Linlong Zhang ◽  
Chengxin Hu
Keyword(s):  
Performance Evaluation ◽  
Natural Frequency ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Shaking Table ◽  
Axial Stiffness ◽  
Neutral Position ◽  
Dynamics Model ◽  
Force Transmissibility ◽  
Kane Method

Abstract In this paper, a special 6-PUS parallel manipulator (PM) is utilized as a shaking table. Unlike the existing results about 6-PUS PMs, we make the actuator direction collinear with the linkage direction at neutral position. With respect to the application background, a further analysis of the special PM is carried out from the perspective of motion/force transmissibility, natural frequency and acceleration capability. Specially, the complete dynamics model is established based on the Kane method. Then, generalized transmission indices based on the screw theory are utilized to reflect its motion ability, and a model of natural frequency is proposed with the axial stiffness of linkages considered. Finally, the effect of the angle between the actuator direction and the linkage direction α on various performances is analyzed, and other results are included to illustrate its feasibility and usability.

Kinematically identical manipulators derivation for the 2-RPU+UPR parallel manipulator and their constraint performance comparison

2020 ◽  
pp. 1-13 ◽  
Author(s):  
Bo Hu ◽  
DongSheng Shi ◽  
Tengfei Xie ◽  
BiBo Hu ◽  
Nijia Ye
Keyword(s):  
Optimal Design ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Performance Comparison ◽  
Comparison Study ◽  
Optimal Parameters ◽  
Force Transmission ◽  
Definition Of

Abstract This paper derives the kinematically identical manipulators (KIMs) of the 2-RPU+UPR parallel manipulators (PMs) and performs a comparison study among them. Based on the principle for deriving KIMs, ten non-overconstrained and twelve overconstrained KIMs of the 2-RPU+UPR PMs are derived. The 2-RPU+UPR PM and its KIMs has identical kinematics but different constraints. On the basis of motion/force transmission indices, the optimal design of the 2-RPU+UPR PM and its KIMs is carried out and the optimal parameters are obtained. With the optimal parameters and the definition of constraint performance, their constraint performances are compared. The comparison study with the 2-RPU+UPR PM and its KIMs is helpful for obtaining the optimal architectures among them.

A novel planar parallel manipulator with high orientation capability for a hybrid machine tool: kinematics, dimensional synthesis and performance evaluation

Robotica ◽  
2015 ◽  
Vol 35 (5) ◽  
pp. 1031-1053 ◽  
Author(s):  
Samy F. M. Assal
Keyword(s):  
Performance Evaluation ◽  
Machine Tool ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Design Parameters ◽  
Dimensional Synthesis ◽  
Hybrid Machine Tool ◽  
Planar Parallel Manipulator ◽  
Hybrid Machine ◽  
High Orientation

SUMMARYIn order to potentially realize the advantages of planar parallel manipulators to be used for hybrid machine tools, the inherently abundant singularities which diminish the usable workspace must be eliminated. Proper structure synthesis and dimensional synthesis can provide a good solution. So, a non-conventional architecture of a three-PPR planar parallel manipulator is proposed in this paper for a hybrid machine tool. The proposed architecture permits a large dexterous workspace with unlimited orientation capability and no singularities. It also provides partially decoupled motion which permits independent actuators control. The kinematic, singularity, orientation capability and workspace analyses of the proposed manipulator are studied to verify those advantages. Based on a non-dimensional design parameter space, the highly important indices for this application namely the workspace index (WI), the motion/force transmission index, the kinematic and dynamic dexterity indices and the stiffness index are selected to be maximized yielding proper dimensions of the design parameters. Those performance indices are proven to be uniform over all the workspace achieving highly important characteristics of uniform accuracy, acceleration characteristics, rigidity and force transmissibility. Performance evaluation is finally presented to verify the high performance of the proposed non-singular planar parallel manipulator with high orientation capability.

Mobility, Kinematic Analysis, and Dimensional Optimization of New Three-Degrees-of-Freedom Parallel Manipulator With Actuation Redundancy

2017 ◽  
Vol 9 (4) ◽  
Author(s):  
Lingmin Xu ◽  
Qinchuan Li ◽  
Ningbin Zhang ◽  
Qiaohong Chen
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Force Transmission ◽  
Transmission Index ◽  
Prismatic Joints ◽  
Redundantly Actuated ◽  
Force Transmissibility ◽  
Solution Velocity ◽  
Three Degrees Of Freedom

Parallel manipulators (PMs) with redundant actuation are attracting increasing research interest because they have demonstrated improved stiffness and fewer singularities. This paper proposes a new redundantly actuated parallel manipulator that has three degrees-of-freedom (DOFs) and four limbs. The proposed manipulator is a 2UPR-2PRU parallel manipulator (where P represents an actuated prismatic joint, R represents a revolute joint, and U represents a universal joint) that is actuated using four prismatic joints; two of these joints are mounted on the base to reduce the movable mass. Mobility analysis shows that the moving platform has two rotational DOFs and one translational DOF. First, the inverse displacement solution, velocity, and singularity analyses are discussed. Next, the local transmission index (LTI) and the good transmission workspace are used to evaluate the motion/force transmissibility of the 2UPR-2PRU parallel manipulator. Finally, the parameter-finiteness normalization method (PFNM) is used to produce an optimal design that considers the good transmission workspace. It is thus shown that the motion/force transmission of the proposed manipulator is improved by optimizing the link parameters.

Structure Synthesis of 3-RRS Type Spatial Compliant Parallel Manipulator

2010 ◽  
Vol 44-47 ◽  
pp. 1375-1379
Author(s):  
Da Chang Zhu ◽  
Li Meng ◽  
Tao Jiang
Keyword(s):  
Parallel Manipulator ◽  
Compliant Mechanisms ◽  
Screw Theory ◽  
Weight Ratio ◽  
Parallel Manipulators ◽  
Robot System ◽  
New Approach ◽  
Structure Synthesis ◽  
Rigid Joints ◽  
Type 3

Parallel manipulators has been extensively studied by virtues or its high force-to-weight ratio and widely spread applications such as vehicle or flight simulator, a machine tool and the end effector of robot system. However, as each limb includes several rigid joints, assembling error is demanded strictly, especially in precision measurement and micro-electronics. On the other hand, compliant mechanisms take advantage of recoverable deformation to transfer or transform motion, force, or energy and the benefits of compliant mechanisms mainly come from the elimination of traditional rigid joints, but the traditional displacement method reduce the stiffness of spatial compliant parallel manipulators. In this paper, a new approach of structure synthesis of 3-DoF rotational compliant parallel manipulators is proposed. Based on screw theory, the structures of RRS type 3-DoF rotational spatial compliant parallel manipulator are developed. Experiments via ANSYS are conducted to give some validation of the theoretical analysis.

Integrated optimal design of a high-speed planar parallel manipulator

2018 ◽  
Vol 233 (9) ◽  
pp. 2976-2990 ◽  
Author(s):  
Zhengsheng Chen ◽  
Minxiu Kong
Keyword(s):  
Optimal Design ◽  
Parallel Manipulator ◽  
High Speed ◽  
Design Method ◽  
Tracking Error ◽  
Dimensional Synthesis ◽  
Tracking Accuracy ◽  
Nsga Ii ◽  
Parameters Tuning ◽  
Planar Parallel Manipulator

To obtain excellent comprehensive performances of the planar parallel manipulator for the high-speed application, an integrated optimal design method, which integrated dimensional synthesis, motors/reducers selection, and control parameters tuning, is proposed, and the 3RRR parallel manipulator was taken as the example. The kinematic and dynamic performances of condition number, velocity index, acceleration capability, and low-order frequency are taken into accounts for the dimensional synthesis. Then, to match motors/reducers parameters and keep an economical cost, the constraint equations and the parameters library are built, and the cost is chosen as one of the optimization objectives. Also, to get high tracking accuracy, the dynamic forward plus proportional–derivative control scheme is introduced, and the tracking error is chosen as one of the optimization objectives. Hence, the optimization model including dimensional synthesis, motors/reducers selection and controller parameters tuning is established, which is solved by the genetic algorithm II (NSGA-II). The result shows that comprehensive performances can be effectively promoted through the proposed integrated optimal design, and the prototype was constructed according to the Pareto-optimal front.

Optimal Design of a 2-UPR-RPU Parallel Manipulator

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Feibo Wang ◽  
Qiaohong Chen ◽  
Qinchuan Li
Keyword(s):  
Optimal Design ◽  
Parallel Manipulator ◽  
Design Space ◽  
Parameter Design ◽  
Optimal Parameters ◽  
Force Transmission ◽  
Universal Joint ◽  
Practical Applications ◽  
Optimum Region ◽  
Dimensional Optimization

This paper investigates dimensional optimization of a 2-UPR-RPU parallel manipulator (where U is a universal joint, P a prismatic pair, and R a revolute pair). First, the kinematics and screws of the mechanism are analyzed. Then, three indices developed from motion/force transmission are proposed to evaluate the performance of the 2-UPR-RPU parallel manipulator. Based on the performance atlases obtained, a set of optimal parameters are selected from the optimum region within the parameter design space. Finally, the optimized parameters are determined for practical applications.

Type Synthesis of 3-DOF Spherical Parallel Manipulators Based on Screw Theory1

2004 ◽  
Vol 126 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Screw Theory ◽  
General Procedure ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Type Synthesis ◽  
Validity Condition ◽  
First Time ◽  
Spherical Parallel Manipulator ◽  
Selection Of

A spherical parallel manipulator (SPM) refers to a 3-DOF (degree-of-freedom) parallel manipulator generating 3-DOF spherical motion. A method is proposed for the type synthesis of SPMs based on screw theory. The wrench systems of a spherical parallel kinematic chain (SPKC) and its legs are first analyzed. A general procedure is then proposed for the type synthesis of SPMs. The type synthesis of legs for SPKCs, the type synthesis of SPKCs, as well as the selection of inputs of SPMs are dealt with in sequence. An input validity condition of SPMs is proposed. SPKCs with and without inactive joints are synthesized. The number of overconstraints of each SPKC is also given. The phenomenon of dependent joint groups in an SPKC is revealed for the first time.

Dimensional Synthesis of a Novel 2T2R Parallel Manipulator for Medical Applications

2014 ◽  
Author(s):  
Nitish Kumar ◽  
Olivier Piccin ◽  
Bernard Bayle
Keyword(s):  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Structural Parameters ◽  
Geometric Analysis ◽  
Medical Applications ◽  
Dimensional Synthesis ◽  
Synthesis Algorithm ◽  
Percutaneous Procedures ◽  
Actuated Joints

This paper deals with the dimensional synthesis of a novel parallel manipulator for medical applications. This parallel mechanism has a novel 2T2R mobility derived from the targeted application of needle manipulation. The kinematic design of this 2T2R manipulator and its novelty are illustrated in relation to the percutaneous procedures. Due to the demanding constraints on its size and compactness, achieving a large workspace especially in orientation, is a rather difficult task. The workspace size and kinematic constraint analysis are considered for the dimensional synthesis of this 2T2R parallel mechanism. A dimensional synthesis algorithm based on the screw theory and the geometric analysis of the singularities is described. This algorithm also helps to eliminate the existence of voids inside the workspace. The selection of the actuated joints is validated. Finally, the dimensions of the structural parameters of the mechanism are calculated for achieving the required workspace within the design constraints of size, compactness and a preliminary prototype without actuators is presented.

Considering the Ability for Nonsingular Transitions of Assembly Mode for Dimensional Synthesis

2009 ◽  
Author(s):  
Oscar Altuzarra ◽  
Vi´ctor Petuya ◽  
Mo´nica Uri´zar ◽  
Alfonso Herna´ndez
Keyword(s):  
Parallel Manipulator ◽  
Analytical Procedure ◽  
Parallel Manipulators ◽  
Dimensional Synthesis ◽  
Complex Singularity ◽  
Algebraic Expressions ◽  
Free Region ◽  
Dimensional Parameters ◽  
Cusp Points ◽  
Singularity Locus

An important difficulty in the design of parallel manipulators is their reduced practical workspace, due mainly to the existence of a complex singularity locus within the workspace. The workspace is divided into singularity-free regions according to assembly modes and working modes, and the dimensioning of parallel manipulators aims at the maximization of those regions. It is a common practice to restrict the manipulator’s motion to a specific singularity-free region. However, a suitable motion planning can enlarge the operational workspace by means of transitions of working mode and/or assembly mode. In this paper, the authors present an analytical procedure for obtaining the loci of cusp points of a parallel manipulator as algebraic expressions of its dimensional parameters. The purpose is to find an optimal design for non-singular transitions to be possible.

Sign in / Sign up

Export Citation Format

Share Document