Capacity Analysis and Safety Assessment of Polyethylene Pipeline With Local Wall-Thinning Defect

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Weijie Jiang ◽  
Jianping Zhao
Keyword(s):  
Safety Assessment ◽  
Mechanical Performance ◽  
Orthogonal Design ◽  
Bending Moment ◽  
Limit Load ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Assessment Procedure ◽  
Wall Thinning ◽  
Local Wall Thinning

The purpose of this study is to propose a safety assessment procedure for polyethylene (PE) pipe with local wall-thinning defect. A uniaxial tensile test is performed to test the mechanical performance of PE. Then, the constitutive model for PE can be established. The limit load of the PE pipe with local wall-thinning defect can be studied with the method of combining the orthogonal design of experiment and finite element (FE) analysis. Then, the factors of local wall-thinning defect can be analyzed. The results show that the depth of the defect has a great effect on the limit load (internal pressure and bending moment) of PE pipe. The effects that the axial length of the defect and the circumferential length of the defect have on the limit load are not significant. Referring to the safety assessment of metal pipe proposed by GB/T19624-2004, a safety assessment for PE pipe with local wall-thinning defect is revised.

Limit Load Analysis of Elbow with Local Wall Thinning under Combined Loads

2015 ◽  
Vol 750 ◽  
pp. 198-205
Author(s):  
Peng Cui ◽  
Chang Yu Zhou
Keyword(s):  
Safety Assessment ◽  
Bending Moment ◽  
Limit Load ◽  
Orthogonal Experimental Design ◽  
Limit Loads ◽  
Pressure Pipe ◽  
Combined Loads ◽  
Wall Thinning ◽  
Volume Defect ◽  
Local Wall Thinning

The local wall thinning(LWT) is a kind of common volume defect in pressure pipe. The limit loads of elbows with LWT under pressure, bending moment, torque and their combined loads have been studied in detail by orthogonal experimental design and finite element method. The results have shown that the influence of depth and circumferential length of LWT on the limit load is more obvious compared to that of axial length when an elbow is under pressure, bending moment or torque. The change of limit bending moment and torque with the depth of LWT and circumferential length is significant for an elbow under combined bending moment and torque. At last, the safety assessment equations for elbow under combined in-plane closing bending moment and torque were proposed by regression analysis.

Limit and Shakedown Loads Determination for Locally Thinned Wall Pipe Branch Connection Subjected to Pressure and Bending Moments

2012 ◽  
Author(s):  
Youssef A. F. Hafiz ◽  
Maher Y. A. Younan ◽  
Hany F. Abdalla
Keyword(s):  
Numerical Models ◽  
Bending Moment ◽  
Limit Load ◽  
Tension Stress ◽  
Assessment Procedure ◽  
Wall Thinning ◽  
Out Of Plane ◽  
Plane Bending ◽  
Shakedown Limit ◽  
Local Wall Thinning

In this paper the shakedown limit load for unreinforced locally thinned wall pipe branch connection is determined using the Simplified Technique. Loadings were considered to be internal pressure, as a steady load, with in-plane bending or with out-of-plane bending applied on the branch, as alternating loads. Two locations of local wall thinning were taken; one was on the run pipe opposite to the branch and other on the branch at the maximum tension stress side of the bending moment applied whether in in-plane or out-of-plane situation. Two Finite Element (FE) limit load models were used to verify the modeling of the pipe branch connection with its local wall thinning. First model results were compared with experimental data taken from the literature, and the second results were compared with numerical models taken also from the literature and also compared with API 579 “Fitness For Service” (FFS), part-five, level-two assessment procedure. First and second comparisons lead to good agreement but for API 579 comparison it was found that it is slightly changing with the depth of the local wall thinning but does not reflect the expected behavior of the limit load as the FEA models showed. For the results of the shakedown limit load analysis, Bree diagrams were constructed to show elastic, shakedown and plastic collapse regions. Then, comparison was made to show the effect of the local wall thinning depth and location on previous limits. Finally, the shakedown results were verified using the elastic-plastic ratcheting analysis of API 579, level three assessment and it showed successfully the shakedown, ratcheting and reversed plasticity regions. This verifications and results can prove that the Simplified Technique can be used as a level-three ratcheting assessment in API 579.

Capacity Analysis of PE Pipeline With Non-Planar Defect

2013 ◽  
Author(s):  
Weijie Jiang ◽  
Jianping Zhao ◽  
Dingyue Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Constitutive Model ◽  
Mechanical Performance ◽  
Orthogonal Design ◽  
Bending Moment ◽  
Limit Load ◽  
Capacity Analysis ◽  
Element Analysis ◽  
Load Factors

A tensile test of buried PE pipe is designed to test the mechanical performance. Then the constitutive model for the PE pipe can be established. The limit load of the PE pipe with local thinning defect can be studied with the method of combining the orthogonal design of experiment and finite element analysis. Then the factors of local thinning defect pipe limit load factors can be analyzed. The results show that the depth of the defect has a great effect on the limit load (internal pressure and bending moment) of PE pipe. The effects that the axial length of the defect and the circumferential length of the defect have on the limit load are not significant.

Failure Strength Assessment of Pipes With Local Wall Thinning Under Combined Loading Based on Finite Element Analyses

2004 ◽  
Vol 126 (2) ◽  
pp. 179-183 ◽  
Author(s):  
Do-Jun Shim ◽  
Jae-Boong Choi ◽  
Young-Jin Kim
Keyword(s):  
Finite Element ◽  
Internal Pressure ◽  
Nuclear Power ◽  
Bending Moment ◽  
Combined Loading ◽  
Assessment Procedure ◽  
Finite Element Analyses ◽  
Maximum Moment ◽  
Wall Thinning ◽  
Local Wall Thinning

Failure assessment of a pipe with local wall thinning draws increasing attention in the nuclear power plant industry. Although many guidelines have been developed and are used for assessing the integrity of a wall-thinned pipeline, most of these guidelines consider only pressure loading and thus neglect bending loading. As most pipelines in nuclear power plants are subjected to internal pressure and bending moment, an assessment procedure for locally wall-thinned pipeline subjected to combined loading is urgently needed. In this paper, three-dimensional finite element (FE) analyses are carried out to simulate full-scale pipe tests conducted for various shapes of wall-thinned area under internal pressure and bending moment. Maximum moments based on ultimate tensile stress were obtained from FE results to predict the failure of the pipe. These results are compared with test results, showing good agreement. Additional finite element analyses are then performed to investigate the effect of key parameters, such as wall-thinned depth, wall-thinned angle and wall-thinned length, on maximum moment. Moreover, the effect of internal pressure on maximum moment was investigated. Change of internal pressure did not show significant effect on the maximum moment.

Safety assessment of pipes with multiple local wall thinning defects under pressure and bending moment

2011 ◽  
Vol 241 (8) ◽  
pp. 2758-2765 ◽  
Author(s):  
Jian Peng ◽  
Chang-Yu Zhou ◽  
Ji-Lin Xue ◽  
Qiao Dai ◽  
Xiao-Hua He
Keyword(s):  
Safety Assessment ◽  
Bending Moment ◽  
Wall Thinning ◽  
Local Wall Thinning

Numerical Limit Load Analysis of Pipelines with Local Wall-Thinning

2014 ◽  
Vol 626 ◽  
pp. 482-488
Author(s):  
Bing Ye Xu ◽  
Ying Hua Liu ◽  
Xian He Du ◽  
Gang Chen
Keyword(s):  
Failure Modes ◽  
Bending Moment ◽  
Limit Load ◽  
Computational Formula ◽  
Plastic Limit ◽  
Industrial Accidents ◽  
Large Area ◽  
Wall Thinning ◽  
Load Carrying ◽  
Local Wall Thinning

Local wall-thinning, which can be found frequently on the surfaces of pipelines, may not only reduce the load-carrying capacities of pipelines, but also cause serious industrial accidents. In this paper, through a large number of computational examples, the effects of axial, circumferential, small area and large area local wall-thinning with different sizes on load-carrying capacities and failure modes of pipelines under both internal pressure and bending moment were investigated and evaluated. By data fitting, an engineering computational formula for plastic limit loads of pipelines with local wall-thinning was presented.

Effect of Torsion on Collapse Bending Moment for 24-Inch Diameter Schedule 80 Pipes With Wall Thinning

2012 ◽  
Author(s):  
Kunio Hasegawa ◽  
Yinsheng Li ◽  
Bostjan Bezensek ◽  
Phuong Hoang
Keyword(s):  
Power Plants ◽  
Bending Moment ◽  
Combined Loading ◽  
Bending Moments ◽  
Compressive Stresses ◽  
Wall Thinning ◽  
Nominal Thickness ◽  
Calculation Results ◽  
Loading Modes ◽  
Local Wall Thinning

Piping items in power plants may experience combined bending and torsion moments during operation. Currently, there is a lack of guidance in the ASME B&PV Code Section XI for combined loading modes including pressure, torsion and bending. Finite element analyses were conducted for 24-inch diameter Schedule 80 pipes with local wall thinning subjected to tensile and compressive stresses. Plastic collapse bending moments were calculated under constant torsion moments. From the calculation results, it can be seen that collapse bending moment for pipes with local thinning subjected to tensile stress is smaller than that subjected to compressive stress. In addition, equivalent moment is defined as the root the sum of the squares of the torsion and bending moments. It is found that the equivalent moments can be approximated with the pure bending moments, when the wall thinning length is equal or less than 7.73R·t for the wall thinning depth of 75% of the nominal thickness, where R is the mean radius and t is the wall thickness of the pipe.

Research on Safety Assessment Method for Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

2010 ◽  
Author(s):  
Zhijiang Jin ◽  
Xianping Wan ◽  
Chenghang Jiang
Keyword(s):  
Internal Pressure ◽  
Safety Assessment ◽  
Limit Load ◽  
Assessment Method ◽  
Curved Surface ◽  
Assessment Procedure ◽  
Plastic Limit ◽  
Pressure Pipe ◽  
Welding Defects ◽  
Plastic Limit Load

Since most pressure pipe materials have good toughness, the failure mode of pipe is usually the plastic failure controlled by limit load. The incomplete welding defect is very common in the pipe, and its existence will reduce the load-carrying capacity of pipes. The pipe with incomplete welding defects can be continued using only after passing the appropriate safety assessment, so the research on safety assessment procedure for pressure pipe with incomplete welding defects under combined bending, torsion and internal pressure loadings has a great theoretical and practical engineering value. By using theoretical analyzing method of plastic limit load, the plastic limit load of pressure pipe with different defect size or pipe diameter ratio are calculated in this paper, then safety assessment curved surface and its express equation are obtained by fitting calculation data. Finally a safety assessment procedure is developed for pressure pipes under combined bending, torsion and internal pressure loadings according to the curved surface.

Sign in / Sign up

Export Citation Format

Share Document