Forced Convection Cooling of Low-Power Handheld Devices Using a Vibrating Cantilever Beam

2015 ◽  
Vol 7 (2) ◽  
Author(s):  
Jangwoo Kim ◽  
Paul I. Ro
Keyword(s):  
Heat Source ◽  
Cantilever Beam ◽  
Cooling System ◽  
Temperature Drop ◽  
Form Factors ◽  
Handheld Devices ◽  
Cooling Performance ◽  
Handheld Device ◽  
Convection Cooling ◽  
Cooling Technique

In this study, a convection cooling technique for handheld electronic devices is proposed and investigated. The technique uses bulk airflows generated by a vibrating cantilever beam actuated by a rotating imbalance motor. Analytic coupled physics modeling using an approximate integral method within laminar-flow boundary layers was used to analyze the proposed cooling technique. The cantilever beam and enclosure were designed based on the form factors of a typical handheld device. The bulk airflow cooling performances at various probe locations were investigated experimentally for low and high heating loads and numerically verified. The results indicate that a higher heating load of the heat source results in a larger temperature drop at the same convection rate. Also, for the probe locations away from the heat source and closer to the beam, the resulting temperature drops were relatively small despite a stronger velocity field generated by the beam. This is due first to the heat generated by the vibrating beam itself and second to a circulation of the air heated by the heat source to the rest of the regions in the enclosure. In general, a good agreement between experimental and numerical results was attained, even though a slight difference between two results exists. Overall, significant cooling was achieved by the proposed system. With a beam tip deflection of ±4 mm, nearly an 18-fold increase in the cooling performance was achieved compared to a natural convection case. Furthermore, the cooling performance continues to increase as the tip deflection of the cantilever beam increases. Thus, a cooling system using the bulk airflow generated by a vibrating cantilever beam has much potential as a feasible solution for electronic handheld devices.

scholarly journals Liquid Cooling System for CPU by Electroconjugate Fluid

2014 ◽  
Vol 6 ◽  
pp. 126301 ◽  
Author(s):  
Yasuo Sakurai ◽  
Takeshi Nakada ◽  
Kazuya Edamura
Keyword(s):  
Heat Source ◽  
Personal Computer ◽  
Simple Structure ◽  
Cooling System ◽  
Jet Flow ◽  
Liquid Cooling ◽  
Remarkable Property ◽  
Cooling Performance ◽  
Basic Characteristics ◽  
Liquid Cooling System

The dissipated power of CPU for personal computer has been increased because the performance of personal computer becomes higher. Therefore, a liquid cooling system has been employed in some personal computers in order to improve their cooling performance. Electroconjugate fluid (ECF) is one of the functional fluids. ECF has a remarkable property that a strong jet flow is generated between electrodes when a high voltage is applied to ECF through the electrodes. By using this strong jet flow, an ECF-pump with simple structure, no sliding portion, no noise, and no vibration seems to be able to be developed. And then, by the use of the ECF-pump, a new liquid cooling system by ECF seems to be realized. In this study, to realize this system, an ECF-pump is proposed and fabricated to investigate the basic characteristics of the ECF-pump experimentally. Next, by utilizing the ECF-pump, a model of a liquid cooling system by ECF is manufactured and some experiments are carried out to investigate the performance of this system. As a result, by using this system, the temperature of heat source of 50 W is kept at 60°C or less. In general, CPU is usually used at this temperature or less.

scholarly journals Numerical investigation on cooling performance of Ranque-Hilsch vortex tube

2014 ◽  
Vol 18 (4) ◽  
pp. 1173-1189 ◽  
Author(s):  
Hassan Pouraria ◽  
Warn-Gyu Park
Keyword(s):  
Vortex Tube ◽  
Cooling System ◽  
Flow Behavior ◽  
Temperature Drop ◽  
Turbulence Models ◽  
Peripheral Region ◽  
Energy Separation ◽  
Net Energy ◽  
Cooling Performance ◽  
Refrigeration Capacity

A Ranque-Hilsch vortex tube (RHVT) is a mechanical device that separates a high pressure gas stream into low pressure hot and cold streams. In this study, four different two equation turbulence models namely the standard k-?, RNG k-?, Realizable k-? and standard k-? models were compared to identify the appropriate turbulence model for studying the energy separation effect in a RHVT. Comparison between the numerical and experimental results indicates that the standard k-? model is better than other models in predicting the energy separation phenomenon. The distributions of temperature, pressure, and components of velocity have been obtained in order to understand the flow behavior inside the tube. The effect of cold outlet diameter on temperature drop and refrigeration capacity was studied. The effect of cold mass fraction on the movement of stagnation point and refrigeration capacity has been investigated. Moreover, the feasibility of improving the cooling performance of vortex tube using the cooling system was investigated. The present numerical results revealed that using the cooling system, the net energy transfer rate from cold inner region to the hot peripheral region increases, thereby improving the cooling performance of the device.

A conduction-cooled stage for high-resolution Cryo-SEM

1992 ◽  
Vol 50 (2) ◽  
pp. 1282-1283
Author(s):  
John G. Sheehan
Keyword(s):  
High Resolution ◽  
Liquid Nitrogen ◽  
Mechanical Stability ◽  
Cooling System ◽  
Cold Trap ◽  
Nitrogen Gas ◽  
Particulate Suspensions ◽  
Advantages And Disadvantages ◽  
Convection Cooling ◽  
Styrene Butadiene

The goal is to examine with high resolution cryo-SEM aqueous particulate suspensions used in coatings for printable paper. A metal-coating chamber for cryo-preparation of such suspensions was described previously. Here, a new conduction-cooling system for the stage and cold-trap in an SEM specimen chamber is described. Its advantages and disadvantages are compared to a convection-cooling system made by Hexland (model CT1000A) and its mechanical stability is demonstrated by examining a sample of styrene-butadiene latex.In recent high resolution cryo-SEM, some stages are cooled by conduction, others by convection. In the latter, heat is convected from the specimen stage by cold nitrogen gas from a liquid-nitrogen cooled evaporative heat exchanger. The advantage is the fast cooling: the Hexland CT1000A cools the stage from ambient temperature to 88 K in about 20 min. However it consumes huge amounts of liquid-nitrogen and nitrogen gas: about 1 ℓ/h of liquid-nitrogen and 400 gm/h of nitrogen gas. Its liquid-nitrogen vessel must be re-filled at least every 40 min.

scholarly journals Real-Time Single Image Depth Perception in the Wild with Handheld Devices

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 15
Author(s):  
Filippo Aleotti ◽  
Giulio Zaccaroni ◽  
Luca Bartolomei ◽  
Matteo Poggi ◽  
Fabio Tosi ◽  
...  
Keyword(s):  
Real Time ◽  
Depth Perception ◽  
Depth Estimation ◽  
Autonomous Driving ◽  
Estimation Methods ◽  
Handheld Devices ◽  
Single Image ◽  
Handheld Device ◽  
Time Performance ◽  
In The Wild

Depth perception is paramount for tackling real-world problems, ranging from autonomous driving to consumer applications. For the latter, depth estimation from a single image would represent the most versatile solution since a standard camera is available on almost any handheld device. Nonetheless, two main issues limit the practical deployment of monocular depth estimation methods on such devices: (i) the low reliability when deployed in the wild and (ii) the resources needed to achieve real-time performance, often not compatible with low-power embedded systems. Therefore, in this paper, we deeply investigate all these issues, showing how they are both addressable by adopting appropriate network design and training strategies. Moreover, we also outline how to map the resulting networks on handheld devices to achieve real-time performance. Our thorough evaluation highlights the ability of such fast networks to generalize well to new environments, a crucial feature required to tackle the extremely varied contexts faced in real applications. Indeed, to further support this evidence, we report experimental results concerning real-time, depth-aware augmented reality and image blurring with smartphones in the wild.

Remote Heat Pipe Based Heat Exchanger Performance in Notebook Cooling

2005 ◽  
Author(s):  
Seyyed Khandani ◽  
Himanshu Pokharna ◽  
Sridhar Machiroutu ◽  
Eric DiStefano
Keyword(s):  
Heat Exchanger ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Cooling System ◽  
Temperature Drop ◽  
Operating Conditions ◽  
Cooling Systems ◽  
Temperature Variations ◽  
Non Linear ◽  
Condenser Temperature

Remote heat pipe based heat exchanger cooling systems are becoming increasingly popular in cooling of notebook computers. In such cooling systems, one or more heat pipes transfer the heat from the more populated area to a location with sufficient space allowing the use of a heat exchanger for removal of the heat from the system. In analsysis of such systems, the temperature drop in the condenser section of the heat pipe is assumed negligible due to the nature of the condensation process. However, in testing of various systems, non linear longitudinal temperature drops in the heat pipe in the range of 2 to 15 °C, for different processor power and heat exchanger airflow, have been measured. Such temperature drops could cause higher condenser thermal resistance and result in lower overall heat exchanger performance. In fact the application of the conventional method of estimating the thermal performance, which does not consider such a nonlinear temperature variations, results in inaccurate design of the cooling system and requires unnecessarily higher safety factors to compensate for this inaccuracy. To address the problem, this paper offers a new analytical approach for modeling the heat pipe based heat exchanger performance under various operating conditions. The method can be used with any arbitrary condenser temperature variations. The results of the model show significant increase in heat exchanger thermal resistance when considering a non linear condenser temperature drop. The experimental data also verifies the result of the model with sufficient accuracy and therefore validates the application of this model in estimating the performance of these systems.   This paper was also originally published as part of the Proceedings of the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems.

Bio-inspired Passive Skin Cooling for Handheld Microelectronics Devices

2012 ◽  
Vol 134 (1) ◽  
Author(s):  
Zhi Huang ◽  
Xinsheng Zhang ◽  
Ming Zhou ◽  
Xiaoding Xu ◽  
Xianzheng Zhang ◽  
...  
Keyword(s):  
Heat Dissipation ◽  
Handheld Devices ◽  
Solution Temperature ◽  
Passive Cooling ◽  
Temperature Sensitive ◽  
Operation System ◽  
Critical Solution Temperature ◽  
Handheld Device ◽  
Skin Cooling ◽  
Cooling Technology

Increasing functionality demands more heat dissipation from the skin of handheld devices. The maximum amount of heat that can be dissipated passively, prescribed by the natural convection and blackbody radiation theories, is becoming the bottleneck. In this letter, we propose a novel bio-inspirited technique that may overcome this passive cooling limit. It is made possible by using a biomimetic skin capable of perspiration on demand. The key component of the biomimetic skin is a thin layer of temperature sensitive hydro gel (TSHG). The TSHG layer can sweat the skin with moisture when the skin temperature is higher than the TSHG’s lower critical solution temperature (LCST), and thus boost the heat dissipation rate through evaporation. The TSHG layer can absorb moisture at low temperature to replenish. With this novel passive cooling technology, a handheld device can have nearly four times more power beyond the traditional passive cooling limit, and may be powerful enough to run a desktop operation system like a full functional personal computer.

Numerical Thermal Performance Investigation of an Electric Motor Passive Cooling System Employing Phase Change Materials

2021 ◽  
Author(s):  
Ali Deriszadeh ◽  
Filippo de Monte ◽  
Marco Villani
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Electric Motor ◽  
Phase Change Materials ◽  
Cooling System ◽  
Passive Cooling ◽  
Time Step ◽  
Cooling Performance ◽  
Passive Cooling System ◽  
Change Material

Abstract This study investigates the cooling performance of a passive cooling system for electric motor cooling applications. The metal-based phase change materials are used for cooling the motor and preventing its temperature rise. As compared to oil-based phase change materials, these materials have a higher melting point and thermal conductivity. The flow field and transient heat conduction are simulated using the finite volume method. The accuracy of numerical values obtained from the simulation of the phase change materials is validated. The sensitivity of the numerical results to the number of computational elements and time step value is assessed. The main goal of adopting the phase change material based passive cooling system is to maintain the operational motor temperature in the allowed range for applications with high and repetitive peak power demands such as electric vehicles by using phase change materials in cooling channels twisted around the motor. Moreover, this study investigates the effect of the phase change material container arrangement on the cooling performance of the under study cooling system.

An Experimental Study of Adsorption Cooling System by Using Low Grade Heat Source

2018 ◽  
Author(s):  
H. M. Elgohary ◽  
H. M. Soliman ◽  
A. M. Soliman ◽  
H. H. Gouda ◽  
S.P. Chowdhury
Keyword(s):  
Experimental Study ◽  
Heat Source ◽  
Cooling System ◽  
Low Grade ◽  
Adsorption Cooling System ◽  
Low Grade Heat

scholarly journals Cooling Performance Enhancement of Air-Cooled Condensers by Guiding Air Flow

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3503
Author(s):  
Huang ◽  
Chen ◽  
Yang ◽  
Du ◽  
Yang
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Heat Dissipation ◽  
Performance Enhancement ◽  
Cooling System ◽  
Wind Effects ◽  
Cooling Performance ◽  
Air Cooled Condensers ◽  
Arc Shape

Adverse wind effects on the thermo-flow performances of air-cooled condensers (ACCs) can be effectively restrained by wind-proof devices, such as air deflectors. Based on a 2 × 300 MW coal-fired power generation unit, two types (plane and arc) of air deflectors were installed beneath the peripheral fans to improve the ACC’s cooling performance. With and without air deflectors, the air velocity, temperature, and pressure fields near the ACCs were simulated and analyzed in various windy conditions. The total air mass flow rate and unit back pressure were calculated and compared. The results show that, with the guidance of deflectors, reverse flows are obviously suppressed in the upwind condenser cells under windy conditions, which is conducive to an increased mass flow rate and heat dissipation and, subsequently, introduces a favorable thermo-flow performance of the cooling system. When the wind speed increases, the leading flow effect of the air deflectors improves, and improvements in the ACC’s performance in the wind directions of 45° and –45° are more satisfactory. However, hot plume recirculation may impede performance when the wind direction is 0°. For all cases, air deflectors in an arc shape are recommended to restrain the disadvantageous wind effects.

Sign in / Sign up

Export Citation Format

Share Document