scholarly journals Analytical Study of Cavitation Surge in a Hydraulic System

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Donghyuk Kang ◽  
Kazuhiko Yokota
Keyword(s):  
Hydraulic System ◽  
Analytical Study ◽  
The Other ◽  
Stable Region ◽  
Performance Curve ◽  
Hydraulic Systems ◽  
Inlet Pipe ◽  
One Dimensional ◽  
Suction Performance ◽  
Negative Gradient

In order to clarify effects of an accumulator, pipe lengths and gradients of pressure and suction performances on cavitation surge, one-dimensional stability analyses of cavitation surge were performed in hydraulic systems consisting of an upstream tank, an inlet pipe, a cavitating pump, a downstream pipe, and a downstream tank. An accumulator located upstream or downstream of the cavitating pump was included in the analysis. Increasing the distance between the upstream accumulator and the cavitating pump enlarged the stable region. On the other hand, decreasing the distance between the downstream accumulator and the cavitating pump enlarged the stable region. Furthermore, the negative gradient of a suction performance curve and the positive gradient of a pressure performance curve cause cavitation surge.

Intervalley kinetic energy terms in the effective mass equation: a one-dimensional analytical study

1989 ◽  
Vol 67 (9) ◽  
pp. 896-903 ◽  
Author(s):  
Lorenzo Resca
Keyword(s):  
Kinetic Energy ◽  
Effective Mass ◽  
Analytical Study ◽  
Three Dimensional ◽  
Real Space ◽  
The Other ◽  
Alternative Formulation ◽  
One Dimensional ◽  
Symmetry Properties ◽  
Band Case

We show that a one-dimensional analytical study allows us to test and clarify the derivation, assumptions, and symmetry properties of the intervalley effective mass equation (IVEME). In particular, we show that the IVEME is consistent with a two-band case, and is in fact exact for a model that satisfies exactly all its assumptions. On the other hand, an alternative formulation in k-space that includes intervalley kinetic energy terms is consistent with a one-band case, provided that intra-valley kinetic energy terms are also calculated consistent with one band. We also show that the standard symmetry assumptions for both real space and k-space formulations are not actually exact, but are consistent with a "total symmetric" projection, or with taking spherical averages in a three-dimensional case.

scholarly journals Operating Performance of Pure Electric Loaders with Different Types of Motors Based on Simulation Analysis

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 617
Author(s):  
Xuefei Li ◽  
Chao Duan ◽  
Kun Bai ◽  
Zongwei Yao
Keyword(s):  
Permanent Magnet ◽  
Hydraulic System ◽  
Simulation Analysis ◽  
Permanent Magnet Synchronous Motor ◽  
Operating Performance ◽  
Synchronous Motor ◽  
The Other ◽  
Hydraulic Systems ◽  
Switched Reluctance Motors ◽  
Switched Reluctance

The electrification of loader designs can utilise several power motor types. Hence, this study investigates the operational performance of pure electric-powered loaders matched with three types of motors. Firstly, for the ZL08 loader, it is proposed that a pure electric-powered loader structure adopts two motors to drive the walking and hydraulic systems separately. Secondly, the dynamic parameters of the two motors were matched, and then, a joint vehicle dynamics model of the control system, the Multi-Body Dynamics (MBD) module and the material Discrete Element Method (DEM) module, was established. Finally, the performance of the walking system with three motors was tested by inserting three materials and using accelerating and climbing methods. The operating performance of the hydraulic system was tested by shovelling and unloading three materials. Results show that when inserting difficult materials, the loader’s walking system with switched reluctance motors is 9.74–21.2% deeper than that with the other two motors and 11.7–56.2% faster at the same depth. The hydraulic system consumes 3–15.7% less energy when matched with a permanent magnet synchronous motor than the other two motors. Pure electric loaders have the best operating performance when the walking system is matched with a switched reluctance motor, and the hydraulic system is matched with a permanent magnet synchronous motor.

scholarly journals Assessing a Linear Nanosystem's Limiting Reliability from its Components

2008 ◽  
Vol 45 (03) ◽  
pp. 879-887 ◽  
Author(s):  
Nader Ebrahimi
Keyword(s):  
Present State ◽  
Size Range ◽  
Two Dimensions ◽  
The Other ◽  
One Dimension ◽  
Present Moment ◽  
One Dimensional ◽  
The One ◽  
Fixed Moment ◽  
Nanosized Systems

Nanosystems are devices that are in the size range of a billionth of a meter (1 x 10-9) and therefore are built necessarily from individual atoms. The one-dimensional nanosystems or linear nanosystems cover all the nanosized systems which possess one dimension that exceeds the other two dimensions, i.e. extension over one dimension is predominant over the other two dimensions. Here only two of the dimensions have to be on the nanoscale (less than 100 nanometers). In this paper we consider the structural relationship between a linear nanosystem and its atoms acting as components of the nanosystem. Using such information, we then assess the nanosystem's limiting reliability which is, of course, probabilistic in nature. We consider the linear nanosystem at a fixed moment of time, say the present moment, and we assume that the present state of the linear nanosystem depends only on the present states of its atoms.

Lower Bounds to the Eigenvalues in One-Dimensional Problems by a Shift in the Weight Function

1970 ◽  
Vol 37 (2) ◽  
pp. 267-270 ◽  
Author(s):  
D. Pnueli
Keyword(s):  
Lower Bound ◽  
Weight Function ◽  
Lower Bounds ◽  
Variational Formulation ◽  
Ritz Method ◽  
The Other ◽  
One Dimensional ◽  
Systematic Shift ◽  
The One ◽  
Detailed Computation

A method is presented to obtain both upper and lower bound to eigenvalues when a variational formulation of the problem exists. The method consists of a systematic shift in the weight function. A detailed procedure is offered for one-dimensional problems, which makes improvement of the bounds possible, and which involves the same order of detailed computation as the Rayleigh-Ritz method. The main contribution of this method is that it yields the “other bound;” i.e., the one which cannot be obtained by the Rayleigh-Ritz method.

Damping of Self-Excited Pressure Pulsations in Petrodiesel Pipeline

2014 ◽  
Vol 630 ◽  
pp. 375-382 ◽  
Author(s):  
Daniel Himr ◽  
Vladimir Haban
Keyword(s):  
Hydraulic System ◽  
Check Valve ◽  
Control Valve ◽  
Sampling Frequency ◽  
Pressure Pulsations ◽  
One Dimensional ◽  
Fuel Storage ◽  
Excited Oscillation ◽  
Subsequent Measurement ◽  
And Control

A pumping station in a fuel storage suffered from pressure pulsations in a petrodiesel pipeline. Check valves protecting the station against back flow made a big noise when disc hit a seat. Due to employees complaints we were asked to solve the problem, which could lead to serious mechanical problems. Pressure measurement in the pipeline showed great pulsations, which were caused by self-excited oscillation of control valves at the downstream end of pipeline. The operating measurement did not catch it because of too low sampling frequency. One dimensional numerical model of the whole hydraulic system was carried out. The model consisted of check valve, pipeline and control valve, which could oscillate, so it was possible to simulate the unsteady flow. When the model was validated, a vessel with nitrogen was added to attenuate pressure pulsations. According to the results of numerical simulation, the vessel was installed on the location. Subsequent measurement proved noticeably lower pulsations and almost no noise.

Soft Switching Approach to Reducing Transition Losses in an On/Off Hydraulic Valve

2009 ◽  
Author(s):  
Michael B. Rannow ◽  
Perry Y. Li
Keyword(s):  
Hydraulic System ◽  
Check Valve ◽  
Fluid Flows ◽  
Soft Switching ◽  
Total System ◽  
System Efficiency ◽  
Hydraulic Systems ◽  
Controlled Systems ◽  
Flow Through ◽  
Hydraulic Valve

A method for significantly reducing the losses associated with an on/off controlled hydraulic system is proposed. There has been a growing interest in the use of on/off valves to control hydraulic systems as a means of improving system efficiency. While on/off valves are efficient when they are fully open or fully closed, a significant amount of energy can be lost in throttling as the valve transitions between the two states. A soft switching approach is proposed as a method of eliminating the majority of these transition losses. The operating principle of soft switching is that fluid can temporarily flow through a check valve or into a small chamber while valve orifices are partially closed. The fluid can then flow out of the chamber once the valve has fully transitioned. Thus, fluid flows through the valve only when it is in its most efficient fully open state. A model of the system is derived and simulated, with results indicating that the soft switching approach can reduce transition and compressibility losses by 79%, and total system losses by 66%. Design equations are also derived. The soft switching approach has the potential to improve the efficiency of on/off controlled systems and is particularly important as switching frequencies are increased. The soft switching approach will also facilitate the use of slower on/off valves for effective on/off control; in simulation, a valve with soft switching matched the efficiency an on/off valve that was 5 times faster.

Dynamic balance analysis of contamination control for hydraulic systems based on dynamic filtration ratio

2016 ◽  
Vol 68 (1) ◽  
pp. 45-51
Author(s):  
Guangying Ma ◽  
Shurong Ning ◽  
Yunlong Hu ◽  
jun Gao
Keyword(s):  
Hydraulic System ◽  
Dynamic Balance ◽  
Contamination Level ◽  
Hydraulic Systems ◽  
Level Control ◽  
Content Type ◽  
Contamination Control ◽  
Precise Control ◽  
Dynamic Filtration ◽  
The Relationship

Purpose – The aim of this study is to establish a dynamic model of the filtration ratio. For the problem that the measured value of the filtration ratio is far less than the theoretical value in the actual hydraulic filtering system, the paper aims to find the relationship between the filtration ratio and the parameters of the hydraulic systems, such as the contamination level and the dirt-holding quantity of the filter. Design/methodology/approach – The paper opted for the method of experimental analysis and simulation to determine the relationship between the filtration ratio and the parameters of the hydraulic system, and established a dynamic filtration ratio model. Findings – The paper provides a preliminary model of dynamic filtration ratio, and the model shows that the filtration ratio is exponentially related to the contamination level and the dirt-holding quantity. Different filters have different influence coefficients. The filtering capacity for a certain particle size and the contamination level control of the filter for different hydraulic systems can be judged according to the dynamic balance equation of hydraulic systems. Originality/value – The paper is useful in the selection of filters and in the precise control of the contamination level of the hydraulic system.

Calculation of a closed hydraulic volumetric system

2021 ◽  
pp. 27-30
Author(s):  
Keyword(s):  
Power Plant ◽  
Wind Power ◽  
Hydraulic System ◽  
Working Fluid ◽  
Wind Power Plant ◽  
Hydraulic Systems ◽  
Hydraulic Motor ◽  
Hydraulic Pump ◽  
Oil Pump ◽  
Selection Of

An algorithm is proposed for calculating a closed volumetric hydraulic pump-hydraulic motor system using the example of the hydraulic system of a wind power plant, based on the calculation of the hydraulic systems of mobile machines. The main characteristics of the system components, the selection of initial data for the calculation, working fluid and diameters of hydraulic lines are analyzed. Keywords: hydraulic system, energy, fluid, oil, pump, motor, renewable energy source, wind power plant, machine. [email protected]

Synchronous Control Characteristics Analysis of Shield Propulsion Hydraulic System Based on Tracking Differentiator and Self-Adaptive Nonlinear PID

2021 ◽  
Author(s):  
Sen Li ◽  
XiaoHua Cao
Keyword(s):  
Pid Control ◽  
Hydraulic System ◽  
Control Method ◽  
Hydraulic Systems ◽  
Fuzzy Pid Control ◽  
Synchronous Control ◽  
Tracking Differentiator ◽  
Characteristics Analysis ◽  
Servo Tracking ◽  
Self Adaptive

Aiming at the low precision problem of multi-cylinder cooperative propulsion control in different regions of shield propulsion hydraulic systems under conditions of large load changes, this paper proposes a tracking differentiator and self-adaptive nonlinear PID (TD-NPID) control method to improve the synchronous control characteristics of shield propulsion hydraulic systems. First, the working principles of shield propulsion hydraulic systems were analyzed, and a mathematical model and TD-NPID controller were developed. Then, a simulation model was developed in AMESim-MATLAB environment, and the synchronous dynamic performances of fuzzy PID control, conventional PID control, and TD-NPID control were compared and analyzed. The results demonstrated that the shield propulsion hydraulic system with TD-NPID control had better servo tracking ability and steady-state performance than the systems with fuzzy or conventional PID control, which verified the feasibility of the application of TD-NPID control for the synchronous control of shield propulsion hydraulic systems.

Sign in / Sign up

Export Citation Format

Share Document