Investigation of the Flow Structures in Supersonic Free and Impinging Jet Flows

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
C. Chin ◽  
M. Li ◽  
C. Harkin ◽  
T. Rochwerger ◽  
L. Chan ◽  
...  
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Experimental Studies ◽  
Turbulence Models ◽  
Impinging Jet ◽  
Optical Methods ◽  
Navier Stokes ◽  
Jet Flows ◽  
Shock Cell ◽  
Rans Turbulence Models

A numerical study of compressible jet flows is carried out using Reynolds averaged Navier–Stokes (RANS) turbulence models such as k-ɛ and k-ω-SST. An experimental investigation is performed concurrently using high-speed optical methods such as Schlieren photography and shadowgraphy. Numerical and experimental studies are carried out for the compressible impinging at various impinging angles and nozzle-to-wall distances. The results from both investigations converge remarkably well and agree with experimental data from the open literature. From the flow visualizations of the velocity fields, the RANS simulations accurately model the shock structures within the core jet region. The first shock cell is found to be constraint due to the interaction with the bow-shock structure for nozzle-to-wall distance less than 1.5 nozzle diameter. The results from the current study show that the RANS models utilized are suitable to simulate compressible free jets and impinging jet flows with varying impinging angles.

scholarly journals Assessment of Numerical Methods for Plunging Breaking Wave Predictions

2021 ◽  
Vol 9 (3) ◽  
pp. 264
Author(s):  
Shanti Bhushan ◽  
Oumnia El Fajri ◽  
Graham Hubbard ◽  
Bradley Chambers ◽  
Christopher Kees
Keyword(s):  
Solitary Wave ◽  
Wave Breaking ◽  
Large Scale ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Wave Crest ◽  
Breaking Wave ◽  
Rans Turbulence Models ◽  
Run Up ◽  
Better Than

This study evaluates the capability of Navier–Stokes solvers in predicting forward and backward plunging breaking, including assessment of the effect of grid resolution, turbulence model, and VoF, CLSVoF interface models on predictions. For this purpose, 2D simulations are performed for four test cases: dam break, solitary wave run up on a slope, flow over a submerged bump, and solitary wave over a submerged rectangular obstacle. Plunging wave breaking involves high wave crest, plunger formation, and splash up, followed by second plunger, and chaotic water motions. Coarser grids reasonably predict the wave breaking features, but finer grids are required for accurate prediction of the splash up events. However, instabilities are triggered at the air–water interface (primarily for the air flow) on very fine grids, which induces surface peel-off or kinks and roll-up of the plunger tips. Reynolds averaged Navier–Stokes (RANS) turbulence models result in high eddy-viscosity in the air–water region which decays the fluid momentum and adversely affects the predictions. Both VoF and CLSVoF methods predict the large-scale plunging breaking characteristics well; however, they vary in the prediction of the finer details. The CLSVoF solver predicts the splash-up event and secondary plunger better than the VoF solver; however, the latter predicts the plunger shape better than the former for the solitary wave run-up on a slope case.

Numerical Study of Deterministic Fluxes in Compressor Passages

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
Feng Wang ◽  
Mauro Carnevale ◽  
Luca di Mare
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Navier Stokes ◽  
Design Stage ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Radial Profiles ◽  
And Performance ◽  
Stage Matching ◽  
Unsteady Effects

Computational fluid dynamics (CFD) has been widely adopted in the compressor design process, but it remains a challenge to predict the flow details, performance, and stage matching for multistage, high-speed machines accurately. The Reynolds Averaged Navier-Stokes (RANS) simulation with mixing plane for bladerow coupling is still the workhorse in the industry and the unsteady bladerow interaction is discarded. This paper examines these discarded unsteady effects via deterministic fluxes using semi-analytical and unsteady RANS (URANS) calculations. The study starts from a planar duct under periodic perturbations. The study shows that under large perturbations, the mixing plane produces dubious values of flow quantities (e.g., whirl angle). The performance of the mixing plane can be considerably improved by including deterministic fluxes into the mixing plane formulation. This demonstrates the effect of deterministic fluxes at the bladerow interface. Furthermore, the front stages of a 19-blade row compressor are investigated and URANS solutions are compared with RANS mixing plane solutions. The magnitudes of divergence of Reynolds stresses (RS) and deterministic stresses (DS) are compared. The effect of deterministic fluxes is demonstrated on whirl angle and radial profiles of total pressure and so on. The enhanced spanwise mixing due to deterministic fluxes is also observed. The effect of deterministic fluxes is confirmed via the nonlinear harmonic (NLH) method which includes the deterministic fluxes in the mean flow, and the study of multistage compressor shows that unsteady effects, which are quantified by deterministic fluxes, are indispensable to have credible predictions of the flow details and performance of compressor even at its design stage.

Numerical Study of the Wave Impact on a Square Column Using Large Eddy Simulation

2007 ◽  
Author(s):  
H. T. C. Pedro ◽  
K.-W. Leung ◽  
M. H. Kobayashi ◽  
H. R. Riggs
Keyword(s):  
Numerical Study ◽  
Turbulence Models ◽  
Simple Algorithm ◽  
Navier Stokes ◽  
Wave Impact ◽  
Eddy Simulation ◽  
Subgrid Model ◽  
Large Eddy ◽  
Volume Approximation ◽  
The Impact

This work concerns the numerical investigation of the impact of a wave on a square column. The wave is generated by a dam break in a wave tank. Two turbulence models were used: Large Eddy Simulations (LES) and Unsteady Reynolds Averaged Navier-Stokes (URANS). The numerical simulations were carried out using a finite volume approximation and the SIMPLE algorithm for the solution of the governing equations. Turbulence was modeled with the standard Smagorinsky-Lilly subgrid-model for the LES and the standard κ-ε model for the URANS. The results are validated against experimental data for the wave impact on a square column facing the flow. The results, especially for LES, show very good agreement between the predictions and experimental results. The overall accuracy of the LES, as expected, is superior to the URANS. However, if computational resources are limited, URANS can still provide satisfactory results for structural design.

Deficiencies in Turbulence Modelling for the Prediction of the Stability Boundary in Highly Loaded Compressors

2019 ◽  
Author(s):  
Jose Moreno ◽  
John Dodds ◽  
Mehdi Vahdati ◽  
Sina Stapelfeldt
Keyword(s):  
High Speed ◽  
Stability Boundary ◽  
Turbulence Models ◽  
Stability Limit ◽  
Major Effect ◽  
Navier Stokes ◽  
Tip Leakage Flow ◽  
Stall Margin ◽  
Multi Stage ◽  
The Stability

Abstract Reynolds-averaged Navier-Stokes (RANS) equations are employed for aerodynamic and aeroelastic modelling in axial compressors. Their solutions are highly dependent on the turbulence models for closure. The main objective of this work is to assess the widely used Spalart-Allmaras model’s suitability for compressor flows. For this purpose, an extensive investigation of the sources of uncertainties in a high-speed multi-stage compressor rig was carried out. The grid resolution near the casing end wall, which affects the tip leakage flow and casing boundary layer, was found to have a major effect on the stability limit prediction. Refinements in this region led to a stall margin loss prediction. It was found that this loss was exclusively due to the destruction term in the SA model.

Simulation of Laboratory Jets and Full Scale Exhaust Plumes (Keynote Paper)

2003 ◽  
Author(s):  
Sanford M. Dash
Keyword(s):  
High Speed ◽  
Scale Up ◽  
Turbulence Models ◽  
Operating Conditions ◽  
Data Sets ◽  
Fighter Aircraft ◽  
The Real ◽  
Exhaust Plumes ◽  
Rans Turbulence Models ◽  
The Subject

Recent activities at CRAFT Tech related to the simulation of high speed laboratory jets, their control via passive actuation, and the scale-up and revisions required for real engines and operation at flight are discussed. We focus on aircraft applications related to jet noise reduction with activities pertinent to varied missile jet/plume applications the subject of other review papers. Laboratory jet experiments have served to validate the RANS turbulence models utilized and are supplemented by LES studies to provide data sets not readily obtainable in the laboratory such as temperature fluctuation data needed for thermal transport modeling. Applications for a military fighter aircraft indicate that laboratory experiments cannot replicate the real exhaust environment and thus can only suggest actuation concepts that are promising. CFD is required to revise and scale-up these concepts for the real engine and to provide estimates of their performance in flight. Studies presented show the differences between laboratory plumes and real plumes, as well as the effects of plume/plume and plume/aerodynamic interactions which are quite appreciable and show a markedly different structure than that of the isolated jet under the same operating conditions.

INVESTIGATION OF INLET EFFECTS ON BACKWARD-FACING STEP FLOW PREDICTION

2016 ◽  
Vol 40 (3) ◽  
pp. 317-329 ◽  
Author(s):  
Mustafa Kemal Isman
Keyword(s):  
Experimental Data ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Backward Facing Step ◽  
Step Flow ◽  
Uniform Velocity ◽  
Flow Prediction ◽  
Rans Turbulence Models ◽  
Negative Effect ◽  
Inlet Boundary Condition

The turbulent flow over backward-facing step (BFS) is numerically investigated by using FLUENT® code. Both uniform and non-uniform velocity profiles are used as inlet boundary condition. Five different Reynolds averaged Navier–Stokes (RANS) turbulence models are employed. The Std. k–ω model shows the best agreement with the experimental data among the models used under the conditions considered in this study. The results show that using a uniform velocity profile has a negative effect on predictions if the domain is not sufficiently extended upstream from the inlet. To eliminate this effect, the domain should be extended upstream by about 10Dh from the inlet. However, results show that this extension causes absorption effects of inlet parameters such as inlet turbulence intensity.

Aeroacoustics response of wind turbine blade profiles in normal and icing conditions

2018 ◽  
Vol 42 (3) ◽  
pp. 243-251 ◽  
Author(s):  
Edison H Caicedo ◽  
Muhammad S Virk
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Numerical Study ◽  
Turbulence Models ◽  
Wind Turbine Blade ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation

This article describes a multiphase computational fluid dynamics–based numerical study of the aeroacoustics response of symmetric and asymmetric wind turbine blade profiles in both normal and icing conditions. Three different turbulence models (Reynolds-averaged Navier–Stokes, detached eddy simulation, and large eddy simulation) have been used to make a comparison of numerical results with the experimental data, where a good agreement is found between numerical and experimental results. Detached eddy simulation turbulence model is found suitable for this study. Later, an extended computational fluid dynamics–based aeroacoustics parametric study is carried out for both normal (clean) and iced airfoils, where the results indicate a significant change in sound levels for iced profiles as compared to clean.

scholarly journals Experimental and Numerical Study of an Obliquely Towed Ship Model in Confined Waters

2020 ◽  
Author(s):  
Momchil Terziev ◽  
Khaled Elsherbiny ◽  
Tahsin Tezdogan ◽  
Atilla Incecik
Keyword(s):  
Numerical Simulations ◽  
Eddy Viscosity ◽  
Numerical Study ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Relative Impact ◽  
Drift Angle ◽  
Ship Model ◽  
Angle Condition ◽  
The Subject

Abstract In this study, the forces and moments acting on the KCS ship model as a result of oblique towing at 10 and 20 degrees drift angles are evaluated experimentally and numerically via a commercial Reynolds averaged Navier-Stokes solver. For the purposes of this work, the KCS hull is modelled both experimentally and numerically at a scale factor of 1:75. The adopted case-studies feature both horizontal and vertical restrictions. Thus, the subject of this work is the oblique motion of a ship in a narrow canal with a depth of h/T = 2.2. The relative impact of turbulence modelling is assessed by comparing the computed integral quantities via several eddy-viscosity closure strategies. These include significant variants of the k-ϵ and k-ω models as well as a widely used one-equation closure. Multiphase numerical simulations are performed at several of the experimentally investigated depth Froude numbers for each drift angle condition in order to fully capture the physics of the problem at hand. The present study aims to provide a quantitative evaluation of the performance of the adopted turbulence models and recommended the best closure strategy for the class of investigated problems.

Minimum Wall Distance Computations With Time-Dependent Geometry for CFD

2021 ◽  
Author(s):  
Liwu Wang ◽  
Jian Feng ◽  
Yu Liu ◽  
Sijun Zhang
Keyword(s):  
Present Method ◽  
Turbulence Models ◽  
Time Dependent ◽  
Navier Stokes ◽  
Field Function ◽  
Convection Diffusion ◽  
Convection Diffusion Equation ◽  
Wall Distance ◽  
Rans Turbulence Models ◽  
Computational Fluid Dynamics Cfd

Abstract This paper presents an efficient and scalable method to calculate the minimum wall distance (MWD), which is necessary for the Reynolds-Averaged Navier-Stokes (RANS) turbulence models. The MWD is described by the distance field function which is essentially a partial differential equation (PDE). The PDE is a type of convection-diffusion equation and can be solved by existing computational fluid dynamics (CFD) codes with minor modifications. Parallel computations for the PDE are conducted to study its efficiency and scalability. Encouraging results are obtained and demonstrate the present method is more efficient than all the alternate methods.

Sign in / Sign up

Export Citation Format

Share Document