Lifetime Estimation of a Photovoltaic Module Subjected to Corrosion Due to Damp Heat Testing

2012 ◽  
Vol 135 (2) ◽  
Author(s):  
R. Laronde ◽  
A. Charki ◽  
D. Bigaud
Keyword(s):  
Crystalline Silicon ◽  
Meteorological Data ◽  
Photovoltaic Module ◽  
Model Parameters ◽  
Solar Panels ◽  
Power Requirement ◽  
Pv Module ◽  
Accelerated Life ◽  
Mean Lifetime ◽  
Initial Power

In this paper, a methodology is presented for estimating the lifetime of a photovoltaic (PV) module. Designers guarantee an acceptable level of power (80% of the initial power) up to 25 yr for solar panels without having sufficient feedback to validate this lifetime. Accelerated life testing (ALT) can be carried out in order to determine the lifetime of the equipment. Severe conditions are used to accelerate the ageing of components and the reliability is then deduced in normal conditions, which are considered to be stochastic rather than constant. Environmental conditions at normal operations are simulated using IEC 61725 standard and meteorological data. The mean lifetime of a crystalline-silicon photovoltaic module that meets the minimum power requirement is estimated. The main results show the influence of lifetime distribution and Peck model parameters on the estimation of the lifetime of a photovoltaic module.

scholarly journals Engineering Concept of Energy Storage Systems Based on New Type of Silicon Photovoltaic Module and Lithium Ion Batteries

Energies ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3701
Author(s):  
Stanisław Maleczek ◽  
Kazimierz Drabczyk ◽  
Krzysztof Artur Bogdanowicz ◽  
Agnieszka Iwan
Keyword(s):  
Energy Storage ◽  
Lithium Ion Battery ◽  
Crystalline Silicon ◽  
Storage Systems ◽  
Lithium Ion ◽  
Photovoltaic Module ◽  
Energy Storage Systems ◽  
Efficient System ◽  
Pv Module ◽  
New Type

In recent years, a great importance has been given to hybrid systems of energy generators and energy storages. This article presents the results of our research aimed at checking the possibility of connecting a photovoltaic (PV) module and a lithium-ion battery (LIB), using a simplified control module towards a cheap and efficient system. The photovoltaic modules based on crystalline silicon solar cells, tempered glass as the front layer and ethylene-vinyl acetate (EVA) copolymer as encapsulation material are the most popular type in the industry. The disadvantage of such module type is the high weight of about 15 kg/m2. The weight of PV module used in the presented energy storage system is twice as small. This new type of PV module is based on treated poly(methyl methacrylate) (PMMA) as back sheet; high transparent foil as front sheet. Changing glass layer to PMMA requires additional modification of the lamination process parameters and EVA polymer type. For this reason, an EVA polymer with reduced crosslinking temperature was used in most cases; the voltage obtained from solar panels is significantly different from the one required by battery system. Hence, voltage converters (step-up or step-down) are needed. The use of a voltage stabilizing converter (which is a kind of electrical buffer) between the solar cell and lithium-ion battery can in some cases replace the battery overcharge protection system. However, an indispensable element is the system protecting the battery from excessive discharge. The voltage converter permits direct connection between the electricity storage and power supply, which current-voltage parameters do not match. The converter’s task is to change the value of current and voltage in a way that meets the requirements of the powered receiver, minimizing power losses, increasing the whole system efficiency. Photovoltaic parameters of the energy storage systems were examined in laboratory and real conditions.

Simulation and Model Validation of the Surface Cooling System for Improving the Power of a Photovoltaic Module

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Dong-Jun Kim ◽  
Dae Hyun Kim ◽  
Sujala Bhattarai ◽  
Jae-Heun Oh
Keyword(s):  
Crystalline Silicon ◽  
Cooling System ◽  
Model Performance ◽  
Water Circulation ◽  
Photovoltaic Module ◽  
Maximum Deviation ◽  
Power Module ◽  
Surface Cooling ◽  
Transient Model ◽  
Pv Module

One of the unique features of photovoltaic (PV) modules is the power drop that occurs as the silicon temperature increases due to the characteristics of the crystalline silicon used in a solar cell. To overcome this reduction in power, module surface cooling using water circulation was employed. The model performance was then conceptually evaluated and experimentally verified. A transient model was developed using energy balances and heat and mass transfer relationships from various other sources to simulate the surface cooling system. The measurements were in good agreement with the model predictions. The maximum deviation between the measured and predicted water and silicon temperature differed by less than 4 °C. The maximum power enhancement in response to the cooling was 11.6% when compared with a control module. The surface cooling system also washed the module surface via water circulation, which resulted in an additional power up of the PV module in response to removal of the particles that interfere with solar radiation from the surface of the PV module. Accordingly, the cooling system could reduce maintenance costs and prevent accidents associated with cleaning. In addition, the increase in cooling water temperature can serve as a heat source. The system developed here can be applied to existing photovoltaic power generation facilities without any difficulties as well.

scholarly journals Adjusting the Single-Diode Model Parameters of a Photovoltaic Module with Irradiance and Temperature

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3226 ◽  
Author(s):  
Nader Anani ◽  
Haider Ibrahim
Keyword(s):  
Numerical Technique ◽  
Standard Test ◽  
Climatic Conditions ◽  
Operating Conditions ◽  
Photovoltaic Module ◽  
Model Parameters ◽  
Pv System ◽  
Pv Module ◽  
Test Conditions ◽  
Parameter Modification

This paper presents a concise discussion and an investigation of the most literature-reported methods for modifying the lumped-circuit parameters of the single-diode model (SDM) of a photovoltaic (PV) module, to suit the prevailing climatic conditions of irradiance and temperature. These parameters provide the designer of a PV system with an essential design and simulation tool to maximize the efficiency of the system. The parameter modification methods were tested using three commercially available PV modules of different PV technologies, namely monocrystalline, multicrystalline, and thin film types. The SDM parameters of the three test modules were extracted under standard test conditions (STC) using a well-established numerical technique. Using these STC parameters as reference values, the parameter adjustment methods were subsequently deployed to calculate the modified parameters of the SDM under various operating conditions of temperature and irradiance using MATLAB-based software. The accuracy and effectiveness of these methods were evaluated by a comparison between the calculated and measured values of the modified parameters.

scholarly journals Proposed Models to Improve Predicting the Operating Temperature of Different Photovoltaic Module Technologies under Various Climatic Conditions

2021 ◽  
Vol 11 (15) ◽  
pp. 7064
Author(s):  
Dang Phuc Nguyen Nguyen ◽  
Kristiaan Neyts ◽  
Johan Lauwaert
Keyword(s):  
Wind Speed ◽  
Crystalline Silicon ◽  
Operating Temperature ◽  
Thermal Inertia ◽  
Climatic Conditions ◽  
Solar Irradiation ◽  
Photovoltaic Module ◽  
Silicon Thin Film ◽  
Pv Module ◽  
Pv Modules

The operating temperature is an essential parameter determining the performance of a photovoltaic (PV) module. Moreover, the estimation of the temperature in the absence of measurements is very complex, especially for outdoor conditions. Fortunately, several models with and without wind speed have been proposed to predict the outdoor operating temperature of a PV module. However, a problem for these models is that their accuracy decreases when the sampling interval is smaller due to the thermal inertia of the PV modules. In this paper, two models, one with wind speed and the other without wind speed, are proposed to improve the precision of estimating the operating temperature of outdoor PV modules. The innovative aspect of this study is two novel thermal models that consider the variation of solar irradiation over time and the thermal inertia of the PV module. The calculation is applied to different types of PV modules, including crystalline silicon, thin film as well as tandem technology at different locations. The models are compared to models that are described in the literature. The results obtained in different time steps show that our proposed models achieve better performance and can be applied to different PV technologies.

Performansi aktual modul photovoltaik dengan pengarah matahari

2018 ◽  
Vol 12 (2) ◽  
pp. 98 ◽  
Author(s):  
Jalaluddin . ◽  
Baharuddin Mire
Keyword(s):  
Solar Radiation ◽  
Local Time ◽  
Performance Characteristic ◽  
Electrical Energy ◽  
Photovoltaic Module ◽  
Experiment Data ◽  
Actual Performance ◽  
Pv Module ◽  
Solar Tracking ◽  
Pv Modules

Actual performance of photovoltaic module with solar tracking is presented. Solar radiation can be converted into electrical energy using photovoltaic (PV) modules. Performance of polycristalline silicon PV modules with and without solar tracking are investigated experimentally. The PV module with dimension 698 x 518 x 25 mm has maximum power and voltage is 45 Watt and 18 Volt respectively. Based on the experiment data, it is concluded that the performance of PV module with solar tracking increases in the morning and afternoon compared with that of fixed PV module. It increases about 18 % in the morning from 10:00 to 12:00 and in the afternoon from 13:30 to 14:00 (local time). This study also shows the daily performance characteristic of the two PV modules. Using PV module with solar tracking provides a better performance than fixed PV module. 

scholarly journals Analysis of Power Generation for Solar Photovoltaic Module with Various Internal Cell Spacing

2021 ◽  
Vol 13 (11) ◽  
pp. 6364
Author(s):  
June Raymond L. Mariano ◽  
Yun-Chuan Lin ◽  
Mingyu Liao ◽  
Herchang Ay
Keyword(s):  
Power Output ◽  
Spacing Effect ◽  
Photovoltaic Cell ◽  
Standard Test ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Engineering Software ◽  
Internal Cell ◽  
Cell Spacing ◽  
Pv Module

Photovoltaic (PV) systems directly convert solar energy into electricity and researchers are taking into consideration the design of photovoltaic cell interconnections to form a photovoltaic module that maximizes solar irradiance. The purpose of this study is to evaluate the cell spacing effect of light diffusion on output power. In this work, the light absorption of solar PV cells in a module with three different cell spacings was studied. An optical engineering software program was used to analyze the reflecting light on the backsheet of the solar PV module towards the solar cell with varied internal cell spacing of 2 mm, 5 mm, and 8 mm. Then, assessments were performed under standard test conditions to investigate the power output of the PV modules. The results of the study show that the module with an internal cell spacing of 8 mm generated more power than 5 mm and 2 mm. Conversely, internal cell spacing from 2 mm to 5 mm revealed a greater increase of power output on the solar PV module compared to 5 mm to 8 mm. Furthermore, based on the simulation and experiment, internal cell spacing variation showed that the power output of a solar PV module can increase its potential to produce more power from the diffuse reflectance of light.

scholarly journals Experimental Learning of Digital Power Controller for Photovoltaic Module Using Proteus VSM

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Abhijit V. Padgavhankar ◽  
Sharad W. Mohod
Keyword(s):  
System Modeling ◽  
Maximum Power ◽  
Digital Controller ◽  
Electric Signal ◽  
Photovoltaic Module ◽  
Boost Converters ◽  
Learning Platform ◽  
Pv Module ◽  
Experimental Learning ◽  
Virtual System

The electric power supplied by photovoltaic module depends on light intensity and temperature. It is necessary to control the operating point to draw the maximum power of photovoltaic module. This paper presents the design and implementation of digital power converters using Proteus software. Its aim is to enhance student’s learning for virtual system modeling and to simulate in software for PIC microcontroller along with the hardware design. The buck and boost converters are designed to interface with the renewable energy source that is PV module. PIC microcontroller is used as a digital controller, which senses the PV electric signal for maximum power using sensors and output voltage of the dc-dc converter and according to that switching pulse is generated for the switching of MOSFET. The implementation of proposed system is based on learning platform of Proteus virtual system modeling (VSM) and the experimental results are presented.

scholarly journals A Study of the Electrical Output and Reliability Characteristics of the Crystalline Photovoltaic Module According to the Front Materials

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 163
Author(s):  
Jong Rok Lim ◽  
Woo Gyun Shin ◽  
Chung Geun Lee ◽  
Yong Gyu Lee ◽  
Young Chul Ju ◽  
...  
Keyword(s):  
Surface Film ◽  
Front Surface ◽  
Photovoltaic System ◽  
Photovoltaic Module ◽  
Reliability Test ◽  
Tempered Glass ◽  
Characteristic Analysis ◽  
Pv Module ◽  
Reliability Characteristics ◽  
Electrical Output

In recent years, various types of installations such as floating photovoltaic (PV) and agri-voltaic systems, and BIPV (building integrated photovoltaic system) have been implemented in PV systems and, accordingly, there is a growing demand for new PV designs and materials. In particular, in order to install a PV module in a building, it is important to reduce the weight of the module. The PV module in which low-iron, tempered glass is applied to the front surface, which is generally used, has excellent electrical output and reliability characteristics; however, it is heavy. In order to reduce the weight of the PV module, it is necessary to use a film or plastic-based material, as opposed to low-iron, tempered glass, on the front surface. However, if a material other than glass is used on the front of the PV module, various problems such as reduced electrical output and reduced reliability may occur. Therefore, in this paper, a PV module using a film instead of glass as the front surface was fabricated, and a characteristic analysis and reliability test were conducted. First, the transmittance and UV characteristics of each material were tested, and one-cell and 24-cell PV modules were fabricated and tested for electrical output and reliability. From the results, it was found that the transmittance and UV characteristics of the front material were excellent. In addition, the electrical output and reliability test results confirmed that the front-surface film was appropriate for use in a PV module.

Sign in / Sign up

Export Citation Format

Share Document