A Model of Force Generation in a Three-Dimensional Toroidal Cluster of Cells

2012 ◽  
Vol 79 (5) ◽  
Author(s):  
Asha Nurse ◽  
L. B. Freund ◽  
Jacquelyn Youssef
Keyword(s):  
Potential Energy ◽  
Gravitational Potential ◽  
Self Assembly ◽  
Three Dimensional ◽  
Dissipative System ◽  
The Self ◽  
Three Dimensions ◽  
Force Generation ◽  
Gravitational Potential Energy ◽  
Kinetics Of

Observation of the self-assembly of clusters of cells in three dimensions has raised questions about the forces that drive changes in the shape of the cell clusters. Cells that self-assemble into a toroidal cluster about the base of a conical pillar have been observed in the laboratory to spontaneously climb the conical pillar. Assuming that cell cluster reorganization is due solely to surface diffusion, a mathematical model based on the thermodynamics of an isothermal dissipative system is presented. The model shows that the cluster can reduce its surface area by climbing the conical pillar, however, this is at the expense of increasing its gravitational potential energy. As a result, the kinetics of the climb are affected by parameters that influence this energy competition, such as the slope of the conical pillar and a parameter of the model κ that represents the influence of the surface energy of the cluster relative to its gravitational potential energy.

Three-dimensional cell culture of chondrocytes on modified di-phenylalanine scaffolds

2007 ◽  
Vol 35 (3) ◽  
pp. 535-537 ◽  
Author(s):  
V. Jayawarna ◽  
A. Smith ◽  
J.E. Gough ◽  
R.V. Ulijn
Keyword(s):  
Electron Microscopy ◽  
Cell Culture ◽  
Cell Proliferation ◽  
Self Assembly ◽  
Three Dimensional ◽  
Building Blocks ◽  
Culture Conditions ◽  
The Self ◽  
Three Dimensions ◽  
Dimensional Cell

The design of self-assembled peptide-based structures for three-dimensional cell culture and tissue repair has been a key objective in biomaterials science for decades. In search of the simplest possible peptide system that can self-assemble, we discovered that combinations of di-peptides that are modified with aromatic stacking ligands could form nanometre-sized fibres when exposed to physiological conditions. For example, we demonstrated that a number of Fmoc (fluoren-9-ylmethyloxycarbonyl) modified di- and tri-peptides form highly ordered hydrogels via hydrogen-bonding and π–π interactions from the fluorenyl rings. These highly hydrated gels allowed for cell proliferation of chondrocytes in three dimensions [Jayawarna, Ali, Jowitt, Miller, Saiani, Gough and Ulijn (2006) Adv. Mater. 18, 611–614]. We demonstrated that fibrous architecture and physical properties of the resulting materials were dictated by the nature of the amino acid building blocks. Here, we report the self-assembly process of three di-phenylalanine analogues, Fmoc-Phe-Phe-OH, Nap (naphthalene)-Phe-Phe-OH and Cbz (benzyloxycarbonyl)-Phe-Phe-OH, to compare and contrast the self-assembly properties and cell culture conditions attributable to their protecting group difference. Fibre morphology analysis of the three structures using cryo-SEM (scanning electron microscopy) and TEM (transmission electron microscopy) suggested fibrous structures with dramatically varying fibril dimensions, depending on the aromatic ligand used. CD and FTIR (Fourier-transform IR) data confirmed β-sheet arrangements in all three samples in the gel state. The ability of these three new hydrogels to support cell proliferation of chondrocytes was confirmed for all three materials.

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Self-assembled three-dimensional hierarchical graphene hybrid hydrogels with ultrathin β-MnO2 nanobelts for high performance supercapacitors

2015 ◽  
Vol 3 (4) ◽  
pp. 1540-1548 ◽  
Author(s):  
Sheng Zhu ◽  
Hui Zhang ◽  
Ping Chen ◽  
Lin-Hui Nie ◽  
Chuan-Hao Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
The Self ◽  
Mass Loading ◽  
Hybrid Hydrogel ◽  
Precise Control ◽  
Ultrafine Structure ◽  
Hybrid Hydrogels ◽  
Self Assembled

A facile protocol for the self-assembly of the rGO/β-MnO2 hybrid hydrogel with ultrafine structure and precise control of mass-loading for high performance supercapacitors is reported.

Tracker-assisted modelling: simultaneous validation of the conservation law of energy and the work-energy theorem

2021 ◽  
Vol 57 (1) ◽  
pp. 015012
Author(s):  
Unofre B Pili ◽  
Renante R Violanda
Keyword(s):  
Kinetic Energy ◽  
Potential Energy ◽  
Gravitational Potential ◽  
Conservation Law ◽  
Gravitational Potential Energy ◽  
Time Data ◽  
Home Based ◽  
Basic Physics ◽  
Free Falling ◽  
Work Done

Abstract The video of a free-falling object was analysed in Tracker in order to extract the position and time data. On the basis of these data, the velocity, gravitational potential energy, kinetic energy, and the work done by gravity were obtained. These led to a rather simultaneous validation of the conservation law of energy and the work–energy theorem. The superimposed plots of the kinetic energy, gravitational potential energy, and the total energy as respective functions of time and position demonstrate energy conservation quite well. The same results were observed from the plots of the potential energy against the kinetic energy. On the other hand, the work–energy theorem has emerged from the plot of the total work-done against the change in kinetic energy. Because of the accessibility of the setup, the current work is seen as suitable for a home-based activity, during these times of the pandemic in particular in which online learning has remained to be the format in some countries. With the guidance of a teacher, online or face-to-face, students in their junior or senior high school—as well as for those who are enrolled in basic physics in college—will be able to benefit from this work.

scholarly journals Walking in simulated reduced gravity: mechanical energy fluctuations and exchange

1999 ◽  
Vol 86 (1) ◽  
pp. 383-390 ◽  
Author(s):  
Timothy M. Griffin ◽  
Neil A. Tolani ◽  
Rodger Kram
Keyword(s):  
Kinetic Energy ◽  
Potential Energy ◽  
Gravitational Potential ◽  
Inverted Pendulum ◽  
Mechanical Energy ◽  
Center Of Mass ◽  
Metabolic Cost ◽  
Metabolic Energy ◽  
Gravitational Potential Energy ◽  
Reduced Gravity

Walking humans conserve mechanical and, presumably, metabolic energy with an inverted pendulum-like exchange of gravitational potential energy and horizontal kinetic energy. Walking in simulated reduced gravity involves a relatively high metabolic cost, suggesting that the inverted-pendulum mechanism is disrupted because of a mismatch of potential and kinetic energy. We tested this hypothesis by measuring the fluctuations and exchange of mechanical energy of the center of mass at different combinations of velocity and simulated reduced gravity. Subjects walked with smaller fluctuations in horizontal velocity in lower gravity, such that the ratio of horizontal kinetic to gravitational potential energy fluctuations remained constant over a fourfold change in gravity. The amount of exchange, or percent recovery, at 1.00 m/s was not significantly different at 1.00, 0.75, and 0.50 G (average 64.4%), although it decreased to 48% at 0.25 G. As a result, the amount of work performed on the center of mass does not explain the relatively high metabolic cost of walking in simulated reduced gravity.

Sign in / Sign up

Export Citation Format

Share Document